Characteristics of a bioxalate chelating extraction process for removal of chromium,copper and arsenic from treated wood

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70–80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.     

Tributyltin causes abnormal development in embryos of medaka, Oryzias latipes

We examined the effects of tributyltin (TBT) on embryonic development, hatching success and sexual differentiation in Japanese medaka (Oryzias latipes). Embryos (within 8h after fertilization) were exposed to TBT in ovo via nanoinjection at concentrations of 0 (control), 0.16, 0.80, 3.96, 19.2 and 82.1 ng/egg. Embryonic survival, development and hatching were observed. Hatched fry were reared until 60 days when they sexually matured, and sexual differentiation was also examined by accordance of genetic and phenotypic sex, based on existence of DMY (a male determining gene in medaka) and secondary sex characteristics. As results, TBT caused a concentration-dependent mortality and impaired the embryonic development. However, no masculinization was detected at 60 dph medaka adults. Lowest observed effective concentration for inducing abnormal embryonic development was estimated to 0.16 ng/egg (ca. 160 ng/g egg).     

西藏亚东地区铁杉树轮样本稳定氧同位素的气候响应

为调查树轮稳定氧同位素在西藏南部的气候应用潜力,选择了西藏亚东县三个铁杉(Tsuga chinesis Pritz.)样本进行分析。其中两个样本表现出长期的稳定氧同位素下降趋势,而另一个表现出增高趋势,且三者相关性很低。当对三条稳定氧同位素序列进行一阶差处理之后,它们的相关关系有了非常显著的提高,表现出很好的一致性(p0.0001)。无论是原始还是一阶差树轮稳定氧同位素序列,它们都与夏季相对湿度和降水反相关,而与温度正相关,然而方差解释量未能达到古气候重建的最低要求。周期分析发现亚东树轮稳定氧同位素序列仅存在4.657年的显著周期,可能与ENSO活动有关,进一步研究显示1978年之前上年冬天到当年夏天的赤道中东太平洋海表温度对亚东树轮稳定氧同位素有显著影响(p0.01),而在1978年之后则无任何影响,20世纪70年代末期的全球气候突变改变了ENSO对该地树轮稳定氧同位素的影响。     

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests

An alkaline comet assay and a micronucleus test were carried out on erythrocytes of the European chub, Squalius cephalus L., collected in spring and autumn in 2005 and 2006 at three sampling sites in River Sava, near Zagreb, Croatia. The results of comet assay showed the lowest genotoxic influence at the least polluted site, while higher DNA damage was observed at the polluted sites. Although the basal levels of DNA damage were elevated, a clear gradation of DNA damage was found due to pollution intensity in all sampling periods. The lowest cytogenetic damage as revealed by the micronucleus test (MNT) was observed as well at the least polluted site. High variations in MN frequency were observed between sampling periods, although the number of micronucleated erythrocytes was consistently the highest one at the polluted site. The comet assay as a biomarker of genotoxic effect exhibited higher sensitivity in discriminating the genotoxic capacity of studied polluted sites while the MNT was less sensitive. However, both tests should be used together in biomonitoring studies because they can reveal different aspects of DNA damage; comet assay, the early event of genotoxic exposure, and MNT, its final result as a mutagenic potential.     

Neonatal outcomes of congenital diaphragmatic hernia in full term versus early term deliveries: A systematic review and meta-analysis

This systematic review and meta-analysis aimed to review the optimal timing of delivery at term for neonates with prenatally diagnosed congenital diaphragmatic hernia (CDH). We reviewed the literature up to December 19, 2022 using MEDLINE and the Cochrane Library databases. The inclusion criteria were original articles, comparative studies of CDH neonates delivered at an early term (37–38 weeks of gestation) and at full term (39 weeks of gestation or later), and comparative studies investigating outcomes of CDH neonates. Six studies met the inclusion criteria, including 985 neonates delivered at an early term and 629 delivered at full term. The cumulative rate of survival to discharge showed no significant difference between CDH neonates delivered at an early term (395/515; 76.7%) or at full term (345/467; 73.9%) (risk ratio [RR] 1.01; 95% confidence interval [CI], 0.89–1.16; p = 0.85). Furthermore, the number of neonates requiring oxygen therapy at discharge was not significantly different between CDH neonates delivered at an early term (32/370; 8.6%) and at full term (14/154; 9.1%) (RR, 0.99; 95% CI, 0.36–2.70; p = 0.99). Therefore, the optimal timing of delivery at term for neonates with CDH remains unclear.     

Facile Preparation of Chitin/Cellulose Composite Films Using Ionic Liquids

In this study, we performed the facile preparation of chitin/cellulose composite films using two ionic liquids, 1-allyl-3-methylimidazolium bromide (AMIMBr) and 1-butyl-3-methylimidazolium chloride (BMIMCl); the former dissolves chitin and the latter dissolves cellulose. First, solutions of chitin in AMIMBr and cellulose in BMIMCl were individually prepared by heating each mixture at 100 °C for 24 h. Then, the homogeneous mixture of the two solutions was thinly casted on a glass plate, followed by standing at room temperature for 2 h. After the material was subjected to successive Soxhlet extractions with ethanol for 12 h and with water for 12 h, the residue was dried at room temperature to give a composite film. The crystalline structures of the polysaccharides were evaluated by the X-ray diffraction measurement. Furthermore, the thermal stability and mechanical property of the resulting composite film were estimated by the thermal gravimetric analysis measurement and tensile testing, respectively.     

Distribution of polybrominated diphenyl ethers in Japanese autopsy tissue and body fluid samples

Brominated flame retardants are components of many plastics and are used in products such as cars, textiles, televisions, and personal computers. Human exposure to polybrominated diphenyl ether (PBDE) flame retardants has increased exponentially during the last three decades. Our objective was to measure the body burden and distribution of PBDEs and to determine the concentrations of the predominant PBDE congeners in samples of liver, bile, adipose tissue, and blood obtained from Japanese autopsy cases. Tissues and body fluids obtained from 20 autopsy cases were analyzed. The levels of 25 PBDE congeners, ranging from tri- to hexa-BDEs, were assessed. The geometric means of the sum of the concentrations of PBDE congeners having detection frequencies >50 % (ΣPBDE) in the blood, liver, bile, and adipose tissue were 2.4, 2.6, 1.4, and 4.3 ng/g lipid, respectively. The most abundant congeners were BDE-47 and BDE-153, followed by BDE-100, BDE-99, and BDE-28+33. These concentrations of PBDE congeners were similar to other reports of human exposure in Japan but were notably lower than concentrations than those reported in the USA. Significant positive correlations were observed between the concentrations of predominant congeners and ΣPBDE among the samples analyzed. The ΣPBDE concentration was highest in the adipose tissue, but PBDEs were distributed widely among the tissues and body fluids analyzed. The PBDE levels observed in the present study are similar to those reported in previous studies in Japan and significantly lower than those reported in the USA.     

Temperature calibration formula for activated charcoal radon collectors

Radon adsorption by activated charcoal collectors such as PicoRad radon detectors is known to be largely affected by temperature and relative humidity. Quantitative models are, however, still needed for accurate radon estimation in a variable environment. Here we introduce a temperature calibration formula based on the gas adsorption theory to evaluate the radon concentration in air from the average temperature, collection time, and liquid scintillation count rate. On the basis of calibration experiments done by using the 25 m³ radon chamber available at the National Institute of Radiological Sciences in Japan, we found that the radon adsorption efficiency may vary up to a factor of two for temperatures typical of indoor conditions. We expect our results to be useful for establishing standardized protocols for optimized radon assessment in dwellings and workplaces.     

Recycling of plastic packaging waste in Bandung City,Indonesia

Economic growth, changing consumption and production patterns are resulting in rapid increase in the generation of plastic wastes, including plastic packaging waste (PPW). A variety of PPW is identified in the municipal solid waste (MSW) stream. In this paper, quantity and composition of PPW at generators (residential and nonresidential sectors) and at the informal sector of waste recycling were measured, and accordingly the flow of PPW within Bandung City, Indonesia was analyzed. Though the generation rate per capita is not so high (25.1 g per day), total PPW generated by 2.3 million inhabitants in Bandung becomes 58.4 tonnes per day (3.76 % of total MSW generated). Due to lack of integrated MSW management, most of PPW is neither collected properly nor disposed of in appropriate manner by the municipality. Collection of valuable wastes including PPW is done predominantly by the informal sector without regard to health and safety. It is predicted that total PPW recycled by various informal waste recycling players like scavengers, junkmen, intermediates, and dealers is 27.5 tonnes per day (64.6 % of total PPW generated). Interviews regarding the existing handling methods and incentives preferred by generators to increase the recycling rate are also presented.     

Detecting crucial dispersal pathways using a virtual ecology approach: A case study of the mirid bug <Emphasis Type="Italic">Stenotus rubrovittatus</Emphasis>

Detecting dispersal pathways is important both for understanding species range expansion and for managing nuisance species. However, direct detection is difficult. Here, we propose detecting these crucial pathways using a virtual ecology approach, simulating species dynamics using models, and virtual observations. As a case study, we developed a dispersal model based on cellular automata for the pest insect Stenotus rubrovittatus and simulated its expansion. We tested models for species expansion based on four landscape parameters as candidate pathways; these are river density, road density, area of paddy fields, and area of abandoned farmland, and validated their accuracy. We found that both road density and abandoned area models had prediction accuracy. The simulation requires simple data only to have predictive power, allowing for fast modeling and swift establishment of management plans.