Preparation and characteristics of high performance paper containing titanium dioxide photocatalyst supported on inorganic fiber matrix

A novel paper-based material containing titanium dioxide (TiO₂) photocatalyst was successfully prepared by a papermaking technique with the internal addition of inorganic fibers on which TiO₂ particles were supported. Photodegradation performance of acetaldehyde gas, an indoor pollutant, and the durability of the TiO₂-containing papers were investigated under UV irradiation. Ceramic fiber suspension and polydiallyldimethylammonium chloride as a cationic flocculant were mixed, followed by the addition of TiO₂ suspension and anionic polyacrylamide. Subsequently, the inorganic mixture was poured into a pulp suspension, and TiO₂ handsheets then prepared by a papermaking method. The tensile strength of TiO₂-containing paper without a ceramic carrier decreased by more than 30% after 240-h UV irradiation (2 mW/cm²), although the strength of the TiO₂ sheet with ceramic fibers remained reasonably stable. The efficiency of acetaldehyde decomposition by the TiO₂ paper containing an inorganic carrier was nearly equal to that of the carrier-free TiO₂ paper. Scanning electron microscopic observation suggested that most TiO₂ particles were predominantly supported on the inorganic fiber matrix, and were mostly out of contact with organic pulp fibers. The TiO₂ paper with an inorganic carrier demonstrated both excellent photocatalytic performance and durability, which before had been mutually incompatible for organic materials containing TiO₂ photocatalyst. The two-stage mixing procedure for TiO₂ sheet-making is promising for the simple manufacture of high performance paper with photocatalytic ability.     

The Influence of Synoptic-scale Air Flow and Local Circulation on the Dust Layer Height in the North of the Taklimakan Desert

The present study investigates the influences of synoptic-scale air flows and local wind circulations on the dust layer height (DLH) in the Taklimakan Desert, based on lidar observations performed in the north of the desert in March 2003. The DLH fluctuates approximately every three days between 2500 m (above sea level) and 5000 m, including diurnal variations. Meteorological analyses and numerical simulations show that the three-day fluctuation of DLH corresponds with variations in synoptic-scale air flows over the Taklimakan Desert, and the diurnal variations are linked to downdrafts and updrafts that are formed over the north of the desert as part of local circulations. When strong northerly winds prevail in the upper troposphere and a developed valley wind blows toward the Tienshan Mountains in the lower troposphere, the downdrafts strengthen in the middle troposphere over the north of the desert, lowering the DLH to about 2500 m. In contrast, the DLH rises to about 5000 m when the updrafts develop between strong southerly winds in the upper troposphere and a developed mountain wind blowing from the Tienshan Mountains. Simulations for the local circulation behavior without the presence of the Tienshan Mountains demonstrate that the valley and mountain winds on the southern slope of the Tienshan Mountains control the intensity of the downdrafts and updrafts, thereby influencing the DLH over the north of the Taklimakan Desert.     

Feasible conditions for Japanese woody biomass utilization

Environmental Science and Pollution Research - There is an abundance of woody biomass in Japan. However, its economic feasibility is limited. There have been several discussions on whether...     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

The effects of pH on fluoxetine in Japanese medaka (Oryzias latipes): acute toxicity in fish larvae and bioaccumulation in juvenile fish

Recent detection of fluoxetine in the aquatic environment and fish suggests a possibly high accumulation of fluoxetine; however, no report is available on the bioaccumulation of fluoxetine in aquatic organisms. Since bioaccumulation of fluoxetine was probably dependent on pH near the pK(a) value of 10.1, experiments were conducted approximately at pH 7, 8, and 9. Distribution coefficients between 1-octanol and water (D(ow)), and those between synthetic membrane vesicles (liposomes) and water (D(lip-wat)) were determined at pH 7, 8, and 9. The D(ow) and D(lip-wat) values increased significantly with increasing pH. Acute toxicity tests were performed using Japanese medaka (Oryzias latipes) prior to the bioaccumulation test, and 96-h LC(50) values were 5.5, 1.3, and 0.20mgl(-1) at pH 7, 8, and 9, respectively. In the bioaccumulation test, concentrations of fluoxetine and its major metabolite, norfluoxetine, in the fish body and liver were measured. The bioconcentration factors (BCF) of fluoxetine for Japanese medaka were 8.8, 3.0x10, and 2.6x10(2) in the body and 3.3x10(2), 5.8x10(2), and 3.1x10(3) in the liver at pH 7, 8, and 9, respectively. The BCF values were lower at pH 7 and higher at pH 9 mainly because of the increase in nonionized species with significantly higher hydrophobicity than the ionized species at pH values closer to pK(a). A similar trend was obtained for the concentration of norfluoxetine in the fish but the pseudo-BCF values (the ratio of the norfluoxetine concentration in the fish and the fluoxetine concentration in test water) were higher than the BCF value of fluoxetine at all pH conditions.     

Hydroxyl radical concentration profile in photo-Fenton oxidation process: generation and consumption of hydroxyl radicals during the discoloration of azo-dye Orange II

Dynamic behaviors of hydroxyl (OH) radical generation and consumption in photo-Fenton oxidation process were investigated by measuring OH radical concentration during the discoloration of azo-dye Orange II. The effects of operating parameters for photo-Fenton discoloration, i.e. dosages of H₂O₂ and Fe, initial dye concentration, solution pH and UV irradiation, on the generation and consumption of OH radicals playing the main role in advanced oxidation processes were extensively studied. The scavenger probe or trapping technique in which coumarin is scavenger of OH radical was applied to estimate OH radical concentration in the photoreactor during the photo-Fenton discoloration process. The OH radical generation was enhanced with increasing the dosages of Fenton regents, H₂O₂ and Fe. At the initial stage of photo-Fenton discoloration of Orange II, the OH radical concentration rapidly increased (Phase-I) and the OH radical concentration decreased after reaching of OH radical concentration at maximum value (Phase-II). The decrease in OH radical concentration started when the complete discoloration of Orange II was nearly achieved and the H₂O₂ concentration became rather low. The dynamic behavior of OH radical concentration during the discoloration of Orange II was found to be strongly linked with the change in H₂O₂ concentration. The generation of OH radical was maximum at solution pH of 3.0 and decreased with an increase of solution pH. The OH radical generation rate in the Fenton Process was rather slower than that in the photo-Fenton process.     

Effect of void structure of photocatalyst paper on VOC decomposition

TiO₂ powder-containing paper composites, called TiO₂ paper, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ paper has a porous structure originating from the layered pulp fiber network, with TiO₂ powders scattered on the fiber matrix. Under UV irradiation, the TiO₂ paper decomposed gaseous acetaldehyde more effectively than powdery TiO₂ and a pulp/TiO₂ mixture not in paper form. Scanning electron microscopy and mercury intrusion analysis revealed that the TiO₂ paper had characteristic unique voids ca. 10 μm in diameter, which might have contributed to the improved photocatalytic performance. TiO₂ paper composites having different void structures were prepared by using beaten pulp fibers with different degrees of freeness and/or ceramic fibers. The photodecomposition efficiency was affected by the void structure of the photocatalyst paper, and the initial degradation rate of acetaldehyde increased with an increase in the total pore volume of TiO₂ paper. The paper voids presumably provided suitable conditions for TiO₂ catalysis, resulting in higher photocatalytic performance by TiO₂ paper than by TiO₂ powder and a pulp/TiO₂ mixture not in paper form.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.