Low-temperature chromium(VI) biotransformation in soil with varying electron acceptors

Effective and low-cost strategies for remediating chromium (Cr)-contaminated soil are needed. Chromium(VI) leaching from contaminated soil into ground water and surface water threatens water supplies and the environment. This study tested indigenous Cr(VI) microbial transformation in batch systems at 10 degrees C in the presence of various electron acceptors. The effects of carbon addition, spiked Cr(VI), and mixing highly contaminated soil with less contaminated soil were investigated. The results indicated that Cr(VI) can be biotransformed in the presence of different electron acceptors including oxygen, nitrate, sulfate, and iron. Sugar addition had the greatest effect on enhancing Cr(VI) removal. Less dissolved organic carbon (DOC) was consumed per amount of Cr(VI) transformed under anaerobic conditions [0.8-93 mg DOC/mg Cr(VI)] compared with aerobic conditions [1.4-265 mg DOC/mg Cr(VI)]. Toxicity of high concentrations (< 160 mg/L) of spiked Cr(VI) were not evident. At Cr(VI) concentrations > 40 mg/L, aerobic conditions promoted faster Cr(VI) reduction than anaerobic conditions with nitrate or sulfate present. Biotransformation of Cr(VI) in highly contaminated soil (22,000 mg Cr/kg) was facilitated by mixing with less-contaminated soil. The study results provide a framework for evaluating indigenous Cr(VI) microbial transformation and enhance the ability to develop strategies for soil treatment.     

Preparation of novel activated carbons from H2SO4-pretreated corncob hulls with KOH activation for quick adsorption of dye and 4-chlorophenol

Corncob hull was immersed in 25 wt% H(2)SO(4) and was carbonized in an oven at 290 °C for 2h to obtain the char. The char was then activated for 1h at 780 °C by KOH at weight ratio of KOH/char of 2.5, 3.0, and 3.5. SEM photos of the carbons revealed that the cell wall of corncob hull was etched into thin film structure. It was shown that the adsorption isotherms of methylene blue and 4-chlorophenol on the carbons were well fitted by the Langmuir equation. Moreover, the adsorption kinetics could be satisfactorily described by the Elovich equation. The normalized standard deviations are less than 2.8%. The high fraction of adsorption amount adsorbed within 1 min to that at saturation demonstrated the advantage of the prepared activated carbons. The fraction of adsorption amount within 1 min to that at saturation (q(1)/q(mon)) for the adsorption of 4-CP is high up to 0.807. Such quick adsorption behavior was mainly attributed to the presence of the thin film structure of carbons.     

In utero sonographic diagnosis of a communicating enteric duplication cyst in a giant omphalocele

Enteric duplications are rare lesions, and relatively few cases have been diagnosed prenatally. We present, to our knowledge, the first case of an associated communicating ileal duplication cyst in a huge omphalocele diagnosed prenatally. The prenatal ultrasound findings revealed four features of the cystic lesion including peristaltic movements of the cystic wall, communication between the cyst and normal bowel lumen, intra-cystic echogenic contents, and echogenic mesenteric tissue (fat) close to the cyst. These distinct characteristics helped us to make a firm in utero diagnosis. Copyright © 2001 John Wiley & Sons, Ltd.     

A novel single-stage LED driver for energy-saving streetlight applications with interleaved power-factorcorrection

This paper proposes a novel single-stage light-emitting diode (LED) driver with interleaved power-factor corrections (PFC) suitable for energy-saving streetlight applications. The presented circuit combines an interleaved boost PFC converter with a half-bridge-type series-resonant converter cascaded with a full-bridge rectifier into a single-stage power-conversion topology. Two inductors in the interleaved boost PFC converter sub-circuit are designed to operate in discontinuous-conduction mode (DCM) in order to achieve input-current shaping, and the half-bridge-type series-resonant converter cascaded with a full-bridge rectifier is designed to obtain zero-voltage switching (ZVS) on two power switches to reduce their switching losses. The proposed driver features high power factor, low total-harmonic distortion (THD) of input current, and high circuit efficiency, all of which results in energy savings. A prototype driver is developed and implemented to supply a 165W-rated LED streetlight module with utility-line input voltages ranging from 210 V to 230 V. In addition, satisfactory experimental results have demonstrated the feasibility of the proposed LED driver.     

The thermal hazard evaluation of 1,1-di (tert-butylperoxy) cyclohexane by DSC using non-isothermal and isothermal-kinetic simulations

1,1-Di (tert-butylperoxy) cyclohexane (DTBPH) has been widely employed in the chemical industry. Unfortunately, organic peroxides have been involved in many serious fires and explosions in manufacturing processes, storage, and transportation. This study investigated the thermokinetic parameters by isothermal kinetic and non-isothermal-kinetic simulation, using differential scanning calorimetry (DSC) tests. DSC was applied to assess the kinetic parameters, such as kinetic model, frequency factor (ln k₀), activation energy (E_a), reaction order, and heat of reaction (ΔH_d). Comparisons of non-isothermal and isothermal-kinetic model simulation led to a beneficial kinetic model of thermal decomposition to predict the thermal hazard of DTBPH. Simulations of a 0.5 L Dewar vessel and 25 kg barrel commercial package in liquid thermal explosion models were performed and compared to the results in the literature. From the results, the optimal conditions for use of DTBPH to avoid violent runaway reactions during the storage and transportation were determined. This study established the features of thermal decomposition that could be executed as a reduction of energy potential and storage conditions in view of loss prevention.     

A feasibility study on the predictive emission monitoring system applied to the Hsinta power plant of Taiwan Power Company

The continuous emission monitoring system (CEMS) can monitor flue gas emissions continuously and instantaneously. However, it has the disadvantages of enormous cost, easily producing errors in sampling periods of bad weather, lagging response in variable ambient environments, and missing data in daily zero and span tests and maintenance. The concept of a predictive emission monitoring system (PEMS) is to use the operating parameters of combustion equipment through thermodynamic or statistical methods to construct a mathematic model that can predict emissions by a computer program. The goal of this study is to set up a PEMS in a gas-fired combined cycle power generation unit at the Hsinta station of Taiwan Power Co. The emissions to be monitored include nitrogen oxides (NOx) and oxygen (O2) in flue gas. The major variables of the predictive model were determined based on the combustion theory. The data of these variables then were analyzed to establish a regression model. From the regression results, the influences of these variables are discussed and the predicted values are compared with the CEMS data for accuracy. In addition, according to the cost information, the capital and operation and maintenance costs for a PEMS can be much lower than those for a CEMS.     

The utilization of catalyst sorbent in scrubbing acid gases from incineration flue gas

Catalyst sorbents based on alumina-supported CuO, CeO2, and CuO-CeO2 were applied to a dry scrubber to clean up the SO2/HCl/NO simultaneously from pilot-scale fluidized-bed incineration flue gas. In the presence of organic compounds, CO and the submicron particles SO2 and HCI removed by the fresh catalyst sorbents and NO reduced to N2 by NH3 under the catalysis of fresh and spent desulfurization/dechloridization (DeSO2/DeHCl) catalyst sorbents (copper compounds, Cu, CuO, and CuSO4) were evaluated in this paper. The fresh and spent catalyst sorbents were characterized by the Brunner-Emmett-Teller method (BET), X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), inductively coupled plasma-mass spectrometry (ICP-MS), and the elemental analyzer (EA). The study showed that the performances of CuO, CeO2, and CuO-CeO2/gamma-Al2O3 were better than that of Ca(OH)2. The removal efficiency of SO2 and HCl was 80-95% in the dry scrubber system. Under NH3/NO = 1, NO could not be reduced to N2 because it was difficult to control the ratio of air/fuel in the flue gas. For estimating the feasibility of regenerating the spent catalyst sorbents, BET and EA analyses were used. They indicated that the pore structures were nearly maintained and a small amount of carbon accumulated on their surface.     

Biofiltration of trimethylamine, dimethylamine, and methylamine by immobilized Paracoccus sp. CP2 and Arthrobacter sp. CP1

A biofilter using granular activated carbon with immobilized Paracoccus sp. CP2 was applied to the elimination of 10–250 ppm of trimethylamine (TMA), dimethylamine (DMA), and methylamine (MA). The results indicated that the system effectively treated MA (>93%), DMA (>90%), and TMA (>85%) under high loading conditions, and the maximum degradation rates were 1.4, 1.2, and 0.9 g-N kg⁻¹ GAC d⁻¹. Among the three different amines treated, TMA was the most difficult to degrade and resulted in ammonia accumulation. Further study on TMA removal showed that the optimal pH was near neutral (6.0–8.0). The supply of high glucose (>0.1%) inhibited TMA removal, maybe due to substrate competition. However, complete TMA degradation was achieved under the co-immobilization of Paracoccus sp. CP2 and Arthrobacter sp. CP1 (96%). Metabolite analysis results demonstrated that the metabolite concentrations decreased by a relatively small 27% while the metabolite apparently increased by heterotrophic nitrification of Arthrobacter sp. CP1 in the co-immobilization biofilter.     

An assessment of cause and effect decision-making model for firm environmental knowledge management capacities in uncertainty

Environmental practices in knowledge management capability (EKMC) is a complex and uncertainty concept that is difficult to determine based on a firm’s real situation because measuring EKMC requires a set of qualitative and quantitative measurement. The objective of this study is to develop a cause and effect model in uncertainty using the fuzzy set theory and Decision Making Trial and Evaluation Laboratory (DEMATEL) method. A framework for evaluating EKMC is proposed. An approach of fuzzy linguistic is proposed to evaluate the firm EKMC. The evaluation results of EKMC obtained through the proposed approach are objective and unbiased due to two reasons. Firstly, the results are generated by a group of experts in the presence of motile attributes. Secondly, the fuzzy linguistic approach has more advantage to reduce distortion and losing of information. Through evaluating the result of EKMC, managers could judge the necessity to improve the EKMC and determine which criteria are the needed directions to improve. The managerial implication and conclusions are discussed.     

Preparation of activated carbons from unburnt coal in bottom ash with KOH activation for liquid-phase adsorption

In this work, unburnt coal (UC) in bottom ash from coal-fired power plants was soaked in KOH solution and activated for 1 h at 780 °C. The yield of activated carbons varied from 47.8 to 54.8% when the KOH/UC weight ratio changed from 2 to 4. Pore properties of these activated carbons including the BET surface area, pore volume, pore size distribution, and pore diameter were characterized based on N₂ adsorption isotherms. It was shown that the isotherms for the adsorption of methylene blue, acid blue 74, and 4-chlorophenol from aqueous solutions on these activated carbons at 30 °C were well fitted by the Langmuir equation (correlation coefficient r² > 0.9968). The adsorption capacities of methylene blue, acid blue 74, and 4-chlorophenol were obtained to be 2.40–2.88, 0.57–1.29, and 2.34–5.62 mmol/g, respectively. Moreover, the adsorption kinetics could be suitably described by the Elovich equation.