Impact of vehicular exhaust on ambient air quality of Rohtak city, India

In the present study, ambient air quality of Rohtak city (Haryana) was monitored by High Volume Sampler. The selected parameters to judge the quality of air were Sulphur dioxide (SO2), Nitrogen dioxide NO), Ozone (O3) and Suspended particulate matters (SPM) which give a fair idea of pollution load carried by the air. The monitoring data were collected from six sites randomly selected in Rohtak city. Sulphur dioxide was found below the permissible limits of National Ambient Avo Quality Standards (NAAQS) at all the sites. Higher concentration of SO2 was observed during winter in comparison to summer and monsoon seasons. Nitrogen dioxide concentration was found to be above the prescribed standards of NAAOS at four sites in winter season. Ozone concentration was found below the prescribed standards (NAAOS), but its concentration was higher in summer season as compared to winter. Suspended particulate matter concentration was observed above the safety limits at all the sites in all three seasons.     

Impact of phosphorous on biochemical changes in Hordeum vulgare L. in mixed cropping with chickpea

Multiple cropping (i.e. intercropping or mixed cropping) plays an important role in agriculture because of the effective utilization of resources, significantly enhancing crop productivity compared with that of monocultured crops. The study was planed to assess the effect of various concentrations (00, 30, 60, 90 kg ha(-1)) of phosphorous on the biochemical composition of grains of Hordeum vulgare L. (NDB-1050) in mixed cropping system with Chickpea. Phosphorous is an essential ingredient for plants to convert atmospheric N (N2) into an ammonium (NH4) as a useable form. The available nitrogen content was found more in the year 2006 (131 kg ha(-1)) than year 2005 (105 kg ha(-1)). The results of available nitrogen content were showed that the mixed cropping system enhances N fixation process because phosphorous also influences nodule development through its basic functions in plants as an energy source. Reducing, non reducing and total sugar content of H. vulgare L. were influenced by changes in the phosphorous doses. Maximum protein (13.43%) was obtained at 60 kg P2O5 ha(-1) during the year 2006. Lysine, tryptophan and methionine content were found maximum in year 2006, respectively. Total mineral content of grains of plant (0.99 g 100g(-1)) was found maximum by the application of 60 kg P2O5 ha(-1). It is possible that there was an increase in the soil N made available by the leguminous chickpea species, and this could be another reason why there was an increase in Hordeum vulgare L. shoot mass per plant with intercropping with chickpea.     

Biological treatment of wastewater by selected aquatic plants

Pollutant-removal efficiency of certain macrophytes and algae, such as Eichhornia crassipes, Microcystis aeruginosa, Scenedesmus falcatus, Chlorella vulgaris and Chlamydomonas mirabilis, has been tested in laboratory conditions to evaluate their potential role in wastewater treatment. Sewage of Varanasi city, mixed with the effluents of about 1200 small-scale industries, was used for the tests. The investigation was performed in three stages i.e. a water hyacinth culture followed by an algal culture, and finally a second water hyacinth culture. For the first water hyacinth culture, 10 water hyacinth plants were grown in a tank of wastewater with 15 days' retention time. In the second stage, algal species were cultured in the treated wastewater for 5 days, whilst in the third stage, water hyacinth plants were again grown for further treatment of the wastewater for 9 days. This three-stage aquaculture resulted in very high reductions of BOD (96.9%), suspended solids (78.1%), total alkalinity (74.6%), PO(4)-P (89.2%), NO(3)-N (81.7%), acidity (73.3%), NH(4)-N (95.1%), COD (77.9%), hardness (68.6%) and coliform bacteria (99.2%). An increase in the concentration of dissolved oxygen (70%) was also observed.     

Assessment of the effect of the toxicity of a textile dye on Nostoc muscorum ISU, a diazotrophic cyanobacterium

The impact of graded concentrations (5, 10, 15 and 20 mg dm(-3) of acid mordant Metomega Chrome Orange GL, a common dye used in woollen, carpet and textile industries, was studied on protein and pigment content and photosynthetic oxygen evolution in a diazotrophic cyanobacterium Nostoc muscorum. The lower concentration of 5 mg dm(-3) showed a negligible effect on protein and pigment content and photosynthetic oxygen evolution, whereas at higher concentrations a drastic decrease in the above parameters was observed. The highest concentration of 20 mg dm(-3) resulted in a decrease of protein, chlorophyll a, phycocyanin and carotenoid content by 72, 76, 54 and 17% of the control, respectively. Photosynthetic oxygen evolution also decreased by 92% of the control at this concentration of the dye.     

Association between environmental exposure to p,p′-DDE and lindane and semen quality

Scientific concern exists about the toxic effect of dichlorodiphenyldichloroethylene (p, p′-DDE) and lindane on male infertility, and the mechanism underlying male reproductive toxicity of this pesticide remains unanswered. We investigated not only the possible association between the chlorinated pesticide levels and semen quality in nonoccupationally exposed men, but also the probable mode of action using mitochondrial membrane potential (MMP), reactive oxygen species (ROS), lipid peroxidation (LPO), and sperm chromatin structure assay (SCSA). A study in 278 men (21–40 years old) who visited Obstetrics and Gynecology Department, KGMU, Lucknow, for semen analysis was conducted. We performed semen analysis according to the WHO guidelines, while p, p′-DDE and lindane analysis was done by the GLC and LPO by the spectrophotometer, and the sperm mitochondrial status, ROS, and SCSA with the flow cytometer. The questionnaire data showed no significant difference in the demographic characteristics between the two groups, i.e., trying to conceive >1 year and proven fertility. However, a significant difference in the concentration of p, p′-DDE and lindane was observed between the groups. When the subjects were divided among four categories by quartile of exposure, the subjects in the highest quartile showed low sperm motility as compared to the subjects in the lowest quartile. Pearson’s correlation showed a significant negative correlation between semen p, p′-DDE, lindane level, and sperm quality and positive association with the number of cells with depolarized mitochondria, elevation in ROS production and LPO, and DNA fragmentation index (DFI). The findings are suggestive that these toxicants might cause a decline in semen quality, and these effects might be ROS, LPO, and mitochondrial dysfunction mediated.     

Growth responses and metal accumulation capabilities of woody plants during the phytoremediation of tannery sludge

Five woody plants species (i.e. Terminalia arjuna, Prosopis juliflora, Populus alba, Eucalyptus tereticornis and Dendrocalamus strictus) were selected for phytoremediation and grow on tannery sludge dumps of Common Effluent Treatment Plant (CETP), Unnao (Uttar Pradesh), India. Concentration of toxic metals were observed high in the raw tannery sludge i.e. Fe-1667 > Cr-628 > Zn-592 > Pb-427 > Cu-354 > Mn-210 > Cd-125 > Ni-76 mg kg⁻¹ dw, respectively. Besides, physico-chemical properties of the raw sludge represented the toxic nature to human health and may pose numerous risks to local environment. The growth performances of woody plants were assessed in terms of various growth parameters such as height, diameter at breast height (DBH) and canopy area of plants. All the plant species have the capabilities to accumulate substantial amount of toxic metals in their tissues during the remediation. The ratio of accumulated metals in the plants were found in the order Fe > Cr > Mn > Pb > Zn > Cu > Cd > Ni and significant changes in physico-chemical parameters of tannery sludge were observed after treatment. All the woody plants indicated high bioconcentration factor for different metals in the order Fe > Cr > Mn > Ni > Cd > Pb > Zn > Cu. After one year of phytoremediation, the level of toxic metals were removed from tannery sludge up to Cr (70.22)%, Ni (59.21)%, Cd (58.4)%, Fe (49.75)%, Mn (30.95)%, Zn (22.80)%, Cu (20.46)% and Pb (14.05)%, respectively.     

Thermo-chemical extraction of fuel oil from waste lubricating grease

This study investigated the recovery of oil from waste grease through the process of thermal degradation in an aqueous solution of potassium hydroxide (KOH) followed by solvent extraction. Waste high temperature metal bearing grease was dissolved in a 15 w/w% KOH solution at 80 °C while being agitated at 2000 rpm using a shear action agitator for a period of 15 min. Two distinct layers were observed after 8 min of settling time. The top layer being of dark brown oil and the bottom layer was a heterogeneous mixture. The two layers were separated by decantation. The bottom layer was cooled down to 45 °C followed by slow addition of toluene (C₇H₈) while agitating at 1200 rpm for 15 min to prevent solids settling and minimise rapid volatilisation of the organic compounds in the mixture. Two distinct layers were also formed, the top homogeneous mixture of light brown oil–toluene mixture and the bottom sludge layer. The solvent was recovered from the oil for re-use by fractional distillation of the homogenous mixture. It was observed that 15 w/w% potassium hydroxide solution can chemically degrade the soap matrix in the grease and extract up to 49 w/w% of the fuel oil when subjected to high shear stress at a temperature of 80 °C. The 26 w/w% extraction of oil in the remaining sludge was obtained by solvent extraction process with mass ratios of sludge to solvent of 2:1. Solvent recovery of 88% by mass was obtained via fractional distillation method. The combined extraction processes brought an overall oil yield of 75 w/w% from the waste grease. The fuel oil obtained from this process has similar properties to paraffin oil and can be blended with other oils as an alternative energy source.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.