Responses of nitrification performance, triclosan resistome and diversity of microbes to continuous triclosan stress in activated sludge system

Triclosan(TCS) is commonly found in wastewater treatment plants,which often affects biological treatment processes.The responses of nitrification,antibiotic resistome and microbial community under different TCS concentrations in activated sludge system were evaluated in this study.The experiment was conducted in a sequencing batch reactor(SBR)for 240 days.Quantitative PCR results demonstrated that the abundance of ammonium oxidizing bacteria could be temporarily inhibited by 1 mg/L TCS and then gradually recovered.And the abundances of nitrite oxidizing bacteria(NOB) under 2.5 and 4 mg/L TCS were three orders of magnitude lower than that of seed sludge,which accounted for partial nitrification.When the addition of TCS was stopped,the abundance of NOB increased.The mass balance experiments of TCS demonstrated that the primary removal pathway of TCS changed from adsorption to biodegradation as TCS was continuously added into the SBR system.Moreover,TCS increased the abundance of mexB,indicating the efflux pump might be the main TCS-resistance mechanism.As a response to TCS,bacteria could secrete more protein(PN) than polysaccharide.Three-dimensional excitation-emission matrix revealed that tryptophan PN-like substances might be the main component in PN to resist TCS.High-throughput sequencing found that the relative abundances of Paracoccus,Pseudoxanthomonas and Thauera increased,which could secrete extracellular polymeric substances(EPS).And Sphingopyxis might be the main TCS-degrading bacteria.Overall,TCS could cause partial nitrification and increase the relative abundances of EPS-secreting bacteria and TCS-degrading bacteria.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

固体样品六价铬的检测比对和验证

采用碱溶液提取/火焰原子吸收法(HJ 687—2014《固体废物六价铬的测定 碱消解/火焰原子吸收分光光度法》和HJ 1082—2019《土壤和沉积物 六价铬的测定 碱溶液提取-火焰原子吸收分光光度法》)测定了固体废物和土壤样品中六价铬含量,比对和验证了2种方法实验流程、分析方法性能及不确定度评定结果。结果表明:HJ 687—2014的方法检出限相对较高,不适合测定浓度较低的土壤;HJ 1082—2019要求按照试样制备的步骤配置工作曲线,考虑了基体干扰的影响。HJ 687—2014的检出限为0.28 mg/kg,相对标准偏差为0.69%~0.93%,样品加标回收率为95.7%~97.2%;HJ 1082—2019的检出限为0.17 mg/kg,相对标准偏差为0.6%~3.0%,样品加标回收率为76.0%~83.1%。对于同一实际样品,2种方法的测定结果相近,HJ 687—2014和HJ 1082—2019的测定结果分别为(48.1±4.2),(46.6±5.4) mg/kg。比对发现,影响HJ 687—2014和HJ 1082—2019不确定度的最主要环节分别为曲线拟合和样品消解。     

白洋淀流域地表水化学特征及控制因素

为探究半干旱区地表水化学特征及物质来源,以白洋淀流域为研究对象,利用Piper三线图和Gibbs水岩模型,对地表水的主要离子组成特征及其来源进行分析。结果表明:白洋淀流域地表水pH为7.56~8.23时,呈弱碱性,且溶解性总固体（TDS,100~650 mg/L）在流域的不同空间区域表现为淀区 > 下游 > 上游。白洋淀流域地表水阳离子以Na+和Ca2+为主,离子总量占比76.60%;阴离子以HCO₃-为主,约占阴离子总量61.52%。地表水的水化学类型为HCO₃-Ca型（上游水体）和HCO₃·SO₄·Cl-Na·Ca型（下游河流和淀区）。白洋淀水文地球化学过程受到人类活动和自然作用的双重控制;自然作用下,白洋淀流域地表水中的离子来源于岩石风化（碳酸盐岩及硅酸盐岩的风化溶解）,同时受到蒸发-结晶作用影响。     

全球海洋初级生产力与海洋环境要素时空关联模式挖掘分析

全球海洋初级生产力在海洋环境要素的驱动下呈现不同的时空分布特征,但在不同的海域两者之间的关联模式并不清晰。本文从地理时空规则挖掘的角度,利用1998年1月—2016年12月之间的序列多源遥感产品数据,探讨了全球海洋初级生产力和海洋表面温度、海面高度异常、海面降雨、混合层深度和ENSO（El Ni?o-Southern Oscillation）事件的时空关联模式。研究结果表明:1）在西赤道太平洋,海面高度异常降低、海面降雨异常降低和混合层深度异常升高会提升真光层营养盐供应,致使海洋初级生产力的异常升高。2）在中赤道太平洋,海面高度异常升高、海面降雨异常升高和混合层深度异常降低会抑制真光层营养盐供应,致使海洋初级生产力的异常降低。3）在东赤道太平洋,海面高度异常升高和海面降雨异常升高会抑制真光层营养盐供应、混合层深度异常升高降低了铁元素含量,从而导致海洋初级生产力的异常降低。4）在南太平洋,浮游植物丰度与营养盐呈负相关,海洋表面温度异常升高/异常降低会提升/抑制微生物光合作用效率、海面高度的异常升高/异常降低会抑制/提升真光层营养盐供应,致使海洋初级生产力的异常升高/异常降低。5）厄尔尼诺事件相较于拉尼娜事件更容易引起海洋初级生产力的异常变化。     

A novel state-of-charge-based method for plug-in hybrid vehicle electric distance analysis validated with actual driving data

Mitigation and Adaptation Strategies for Global Change - Promoting Plug-In Hybrid Vehicles (PHEVs) is viewed as a promising strategy to mitigate the energy consumption and greenhouse gas...     

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Mitigation and Adaptation Strategies for Global Change - Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global...     

Optimal range of plug-in electric vehicles in Beijing and Shanghai

Both China’s national subsidy policies for plug-in electric vehicles (PEVs) purchasers and passenger cars corporate average fuel consumption and new vehicle credit regulation (dual-credit policy) favor long-range 300+ km battery electric vehicles (BEVs) and 80+ km plug-in hybrid electric vehicles (PHEVs). However, these electric vehicles tend to have lower energy efficiency and higher purchase and operation costs. Vehicle with larger batteries can also be less equitable because the subsidies are often provided to more expensive vehicles and wealthier owners. This study takes advantage of a novel dataset of daily driving data from 39,854 conventional gasoline vehicles in Beijing and 4999 PHEVs in Shanghai to determine the optimal range of BEVs and PHEVs within their respective cities. We simulate a model to explore ranges with which PEVs emit less GHGs than that of a baseline hybrid and conventional gasoline vehicle while ensuring that all daily travel demands are met. Our findings indicate that in both cities, the optimal ranges to balance cost and travel demand for BEVs are 350 km or less and for PHEVs are 60 km or less in Beijing and 80 km or less in Shanghai. We also find that to minimize carbon dioxide (CO₂) emissions, the ranges are even lower 10 km in Beijing and 30 km in Shanghai. Our study suggests that instead of encouraging long-range PEVs, governments should subsidize PEV models with shorter ranges. Parallel efforts should also be made to both increase renewable energy over fossil fuels and expand charging facilities. Although individual mobility demand varies, the government could reduce occasional long-distance driving by subsidizing alternative transportation choices. Providing week-long driving trials to consumers before their purchases may help decrease the demand of very long range PEVs by alleviating the range anxiety through a learning process.