Development and Pilot Plant Evaluation of Silica- Enhanced Lime Sorbents for Dry Flue Gas Desulfurization

EPA’s efforts to develop low cost, retrofitable flue gas cleaning technology include the development of highly reactive sorbents. Recent work addressing lime enhancement and testing at the bench-scale followed by evaluation of the more promising sorbents in a pilot plant are discussed here.

The conversion of Ca(OH)₂ with SO₂ increased several-fold compared with Ca(OH)₂ alone when Ca(OH)₂ was slurrled with fly ash first and later exposed to SO₂ in a laboratory packed bed reactor. Ca(OH)₂ enhancement increased with the increased fly ash amount. Dlatomaceous earths were very effective reactivity promoters of lime-based sorbents. Differential scanning calorimetry of the promoted sorbents revealed the formation of a new phase (calcium silicate hydrates) after hydration, which may be the basis for the observed Improved SO₂ capture.

Fly ash/lime and diatomaceous earth/lime sorbents were tested in a 100 m³/h pilot facility incorporating a gas humidifier, a sorbent duct injection system, and a baghouse. The inlet SO₂ concentration range was 1000-2500 ppm. With once-through dry sorbent injection into the humidified flue gas [approach to saturation 10–20°C (18–36°F) in the baghouse], the total SO₂ removal ranged from 50 to 90 percent for a stoichiometric ratio of 1 to 2. Recycling the collected solids resulted in a total lime utilization exceeding 80–90 percent. Increased lime utilization was also investigated by the use of additives.     

Localization and density of phoretic deutonymphs of the mite Uropoda orbicularis (Parasitiformes: Mesostigmata) on Aphodius beetles (Aphodiidae) affect pedicel length

The phoretic stage of Uropodina mites is a deutonymph with developed morphological adaptations for dispersal by insects. Phoretic deutonymphs are able to produce a pedicel, a stalk-like temporary attachment structure that connects the mite with the carrier. The aim of our study was to determine whether localization and density of phoretic deutonymphs on the carrier affect pedicel length. The study was conducted on a common phoretic mite—Uropoda orbicularis (Uropodina) and two aphodiid beetles—Aphodius prodromus and Aphodius distinctus. Our results show that pedicel length is influenced by the localization of deutonymphs on the body of the carrier. The longest pedicels are produced by deutonymphs attached to the upper part of elytra, whereas deutonymphs attached to femora and trochanters of the third pair of legs and the apex of elytra construct the shortest pedicels. In general, deutonymphs attached to more exposed parts of the carrier produce longer pedicels, whereas shorter pedicels are produced when deutonymphs are fixed to non-exposed parts of the carrier. A second factor influencing pedicel length is the density of attached deutonymphs. Mean pedicel length and deutonymph densities were highly correlated: higher deutonymph density leads to the formation of longer pedicels. The cause for this correlation is discussed, and we conclude that pedicel length variability can increase successful dispersal.     

Methods for determination of elemental carbon in ambient air

A few analytical methods of elemental carbon determination are described. The purpose of the work is to choose the best method for determination of its content in dust suspended in air in industrial regions. The reflectance and chromatographic methods were investigated. It was shown that the reflectance methods could be used only when the particle size and form of elemental carbons constant. The chromatographic method, which includes the step of combustion of the sample in oxygen and chromatographic determination of evolved CO₂ is recommended, since it is independent of the form of carbon. Organic carbon is removed from dust samples by extraction with benzene-methanol mixture.     

Mercury Vapor Determination in Hospitals

The measurements of metallic mercury vapor were carried out in seven local hospitals, where mercury-containing products are widely used, as well as in one residence to check effectiveness of decontamination after mercury spillage. Hopcalite as a solid sorbent was used in active and passive sampling methods, and mercury was analyzed by CV-AAS technique. Good agreement was found between results of mercury measurements using active samplers (pumped hopcalite adsorption tubes) and passive (diffusion) monitors applied in indoor atmosphere. The results indicated the presence of metallic mercury vaporization sources in the assessed hospital rooms but in the majority of cases mercury levels did not exceed 1 g/m³ i.e. Polish permissible concentration for residence. However, in some of the hospital rooms, elevated concentrations of mercury vapor were found and airborne levels of up to 13.9 g/m³ were recorded. Higher concentrations of mercury vapor were observed in autumn season when compared to summer.     

Simultaneous control of Hg0, SO2, and NOx by novel oxidized calcium-based sorbents

Efforts to develop multipollutant control strategies have demonstrated that adding certain oxidants to different classes of Ca-based sorbents leads to a significant improvement in elemental Hg vapor (Hg0), SO2, and NOx removal from simulated flue gases. In the study presented here, two classes of Ca-based sorbents (hydrated limes and silicate compounds) were investigated. A number of oxidizing additives at different concentrations were used in the Ca-based sorbent production process. The Hg0, SO2, and NOx capture capacities of these oxidant-enriched sorbents were evaluated and compared to those of a commercially available activated carbon in bench-scale, fixed-bed, and fluid-bed systems. Calcium-based sorbents prepared with two oxidants, designated C and M, exhibited Hg0 sorption capacities (approximately 100 microg/g) comparable to that of the activated carbon; they showed far superior SO2 and NOx sorption capacities. Preliminary cost estimates for the process utilizing these novel sorbents indicate potential for substantial lowering of control costs, as compared with other processes currently used or considered for control of Hg0, SO2, and NOx emissions from coal-fired boilers. The implications of these findings toward development of multipollutant control technologies and planned pilot and field evaluations of more promising multipollutant sorbents are summarily discussed.     

导致上西里西亚工业区儿童血铅水平升高环境和社会经济因素研究

本文集中在横向分析近期波兰儿童铅暴露和铅暴露增加背后的社会经济因素。在上西里西亚工业区,铅是分布最广泛的有毒重金属之一。儿童血铅水平升高关系儿童幸福,不断引起严重关切。本研究涉及在1999 - 2013年间,上西里西亚地区3岁到18岁的4 882名儿童。记录了每一个孩子血液中铅的浓度。孩子的父母被要求回答关于儿童接触铅的环境和家庭社会经济条件的问卷调查。铅暴露增加的因素包括：父母受教育程度较低,父母失业、父母的职业铅暴,家庭的贫穷社会经济地位,在家吸烟,生活在建筑物底层,食用本地种植的蔬菜和水果,在污染环境中长期进行户外活动和男性性别。铅的环境暴露仍然是导致上西里西亚地区儿童慢性铅中毒的主要因素。与儿童血铅浓度关系最大的社会经济因素是儿童父母的低教育水平。
精选自Wojciech Pelc, Natalia Pawlas, Micha? Dobrakowski, S?awomir Kasperczyk. Environmental and socioeconomic factors contributing to elevated blood lead levels in children from industrial area of Upper Silesia. Environmental Toxicology and Chemistry: Volume 35, Issue 10, pages 2597–2603, October 2016. DOI: 10.1002/etc.3429
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3429/full
     

Simultaneous Control of Hg0, SO2, and NOx by Novel Oxidized Calcium-Based Sorbents

Abstract

Efforts to develop multipollutant control strategies have demonstrated that adding certain oxidants to different classes of Ca-based sorbents leads to a significant improvement in elemental Hg vapor (Hg⁰), SO₂, and NO_x removal from simulated flue gases. In the study presented here, two classes of Ca-based sorbents (hydrated limes and silicate compounds) were investigated. A number of oxidizing additives at different concentrations were used in the Ca-based sorbent production process. The Hg⁰, SO₂, and NO_x capture capacities of these oxidant-enriched sorbents were evaluated and compared to those of a commercially available activated carbon in bench-scale, fixed-bed, and fluid-bed systems. Calcium-based sorbents prepared with two oxidants, designated C and M, exhibited Hg⁰ sorp-tion capacities (~100 μg/g) comparable to that of the activated carbon; they showed far superior SO₂ and NO_x sorption capacities. Preliminary cost estimates for the process utilizing these novel sorbents indicate potential for substantial lowering of control costs, as compared with other processes currently used or considered for control of Hg⁰, SO₂, and NO_x emissions from coal-fired boilers. The implications of these findings toward development of multipollutant control technologies and planned pilot and field evaluations of more promising multipollutant sorbents are summarily discussed.     

The modal low frequency noise of an elastically supported circular plate.

The modal low frequency noise generated by a vibrating elastically supported circular plate embedded into a flat infinite baffle has been examined. The main aim of this study is the analysis of the radiation efficiency. Low frequency approximated formulas have been presented. They are valid for all the limiting boundary conditions of the plate with its edge clamped, guided, simply supported or free as well as for all the intermediate axisymmetric boundary configurations. The formulas are expressed in the elementary form, useful for numerical computations. They are a generalization of some earlier published results. First, they are valid for axisymmetric and asymmetric modes since both kinds of modes play an important role in the low frequency range. Second, a single formula for the radiation efficiency, valid for all the axisymmetric boundary configurations, has been proposed. A numerical example for the sound power radiation has been given for some hatchway covers mounted on a ship deck.     

Influence of anthropogenic transformations of river bed on plant and macrozoobenthos communities

This study describes the influence of urban area on plant communities and benthic invertebrates inhabiting the S?upia River (northern Poland). Ten plant communities and 37 macrozoobenthos taxa were determined during four seasonal samplings at 25 sampling sites (October 2005 and January, April, and August 2006). The obtained data set was statistically evaluated in order to reveal the influence of anthropogenic transformations on the investigated communities against the background of other abiotic factors. Multivariate regression tree (MRT) method was used for vegetation, while for benthic fauna, both MRT and artificial neural network (ANN) methods were applied. The following explanatory variables were used: season, water temperature, and salinity; location of a sampling site; degree of human impact on the riverbed; microhabitat; and substrate type. MRT analyses showed significant differences in plant community structure depending on the location of a sampling site, indicating the influence of anthropogenic pressure, while macrozoobenthos composition differed significantly only between seasons. The overall ANN model proved the importance of type and location of a sampling site for the approximation of benthic fauna density. Additionally, influence of the explanatory variables on the consecutive macrozoobenthos taxa was analyzed on the basis of separate ANN.