Characterization and prediction of meandering channel migration in the GIS environment: A case study of the Sabine River in the USA

This study focused on the prediction of a 22 km meandering channel migration of the Sabine River between the states of Texas and Louisiana. The meander characteristics of 12 bends, identified from seven orthophotos taken between 1974 and 2004, were acquired in a GIS environment. Based on that earlier years' data acquisition, channel prediction was performed for the two years 1996 and 2004 using least squares estimation and linear extrapolations, yielding a satisfactory agreement with the observations (the median predicted and observed migration rates were 3.1 and 3.6 [m/year], respectively). The best-predicted migration rate was found to be associated with the longest orthophoto-recorded interval. The study confirmed that channel migration is strongly correlated with bend curvature and that the maximum migration rate of the bend corresponded to a radius of curvature [bend radius (R(C))/channel width (W(C))] of 2.5. In tight bends of a smaller radius of curvature than 1.6, secondary flow scouring near the bend apex increases bend curvature. The stability index of the dimensionless bend radius was determined to be 2.45. Overall, this study proves the effectiveness of least squares estimation with historical orthophotography for characterization of meandering channel migration.     

Characterizing the long-range transport of black carbon aerosols during Transport and Chemical Evolution over the Pacific (TRACE-P) experiment

A major aircraft experiment Transport and Chemical Evolution over the Pacific (TRACE-P) mission over the NW Pacific in March-April 2001 was conducted to better understand how outflow from the Asian continent affects the composition of the global atmosphere. In this paper, a global climate model, GEOS-Chem is used to investigate possible black carbon aerosol contributions from TRACE-P region. Our result depicts that absorbing black carbon ("soot") significantly outflow during lifting to the free troposphere through warm conveyor belt and convection associated with this lifting. The GEOS-Chem simulation results show significant transport of black carbon aerosols from Asian regions to the Western Pacific region during the spring season. As estimated by GEOS-Chem simulations, approximately 25% of the black carbon concentrations over the western pacific originate from SE Asia in the spring.     

Mercury in air in an area impacted by strong industrial activities

The concentrations of total gaseous mercury (TGM) and its relevant environmental parameters were measured at a highly industrialized area in the Ban Wall industrial complex (BWIC) in An San city, Korea from March to May 2005. The mean concentrations of Hg measured during the entire study period were computed to be 6.32 ± 8.56 ng m⁻³ (range of 2.32–181 ng m⁻³; N = 1160). Due to the effects of strong man-made activities, the significantly high Hg concentration levels (e.g., at or above 10 ng m⁻³) comprised about 7.5% of all data with the mean of 21.8 ± 26.3 ng m⁻³ (N = 87). By separating the data into daytime and nighttime periods, the Hg values exhibited a notable daytime enhancement possibly due to strong man-made activities during working hours. The results of the correlation analysis indicated the possible relationship between the Hg concentration and the temperature as well as several pollutant species (e.g., NO₂ and NO_x). Evaluation of the Hg data in relation with the air mass transport pattern confirms that the Hg concentration levels in this industrial area are affected most eminently by local, rather than distant, pollution sources.     

Effects of various reaction parameters on solvolytical depolymerization of lignin in sub- and supercritical ethanol

Organosolv lignin was treated with ethanol at sub/supercritical temperatures (200, 275, and 350 °C) for conversion to low molecular phenols under different reaction times (20, 40, and 60 min), solvent-to-lignin ratios (50, 100, and 150 mL g⁻¹), and initial hydrogen gas pressures (2 and 3 MPa). Essential lignin-degraded products, oil (liquid), char (solid), and gas were obtained, and their yields were directly influenced by reaction conditions. In particular, concurrent reactions involving depolymerization and recondensation as well as further (secondary) decomposition were significantly accelerated with increasing temperature, leading to both lignin-derived phenols in the oil fraction and undesirable products (char and gas).     

Performance and mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolar electrodes

• EC modified with BPEs enhances pollutant removal and reduce energy consumption. • Increasing BPE number cannot increase flocculants yield exponentially. • Simulations help to predict the distribution of electrochemical reactions on BPEs. The design of electrodes is crucial to electrocoagulation process (EC), specifically, with respect to pollutant removal and energy consumption. During EC, the mechanisms for interaction between different electrode arrangement and electrode reactions remain unclear. This work presents an integrated EC process based on horizontal bipolar electrodes (BPEs). In the electrochemical cell, the graphite plates are used as driving cathode while either Fe or Al plates serves as driving anode and BPEs. The BPEs are placed horizontally between the driving electrodes. For municipal wastewater treatment, the pollutant removal efficiency and energy consumption in different configurations of two-dimension electrocoagulation (2D-EC) system with horizontal BPEs were investigated. The removal efficiency of turbidity, total phosphorus and total organic carbon increased significantly with the number of BPEs. Noted that the energy consumption for TP removal decreased by 75.2% with Fe driving anode and 81.5% with Al driving anode than those of 2D-EC, respectively. In addition, the physical field simulation suggested the distributions of potential and current in electrolyte and that of induced charge density on BPE surface. This work provides a visual theoretical guidance to predict the distribution of reactions on BPEs for enhanced pollutant removal and energy saving based on electrocoagulation process for municipal wastewater treatment.     

Methane production potential of leachate generated from Korean food waste recycling facilities: a lab-scale study

This paper examines the applicability of food waste leachate (FWL) in bioreactor landfills or anaerobic digesters to produce methane as a sustainable solution to the persisting leachate management problem in Korea. Taking into account the climatic conditions in Korea and FWL characteristics, the effect of key parameters, viz., temperature, alkalinity and salinity on methane yield was investigated. The monthly average moisture content and the ratio of volatile solids to total solids of the FWL were found to be 84% and 91%, respectively. The biochemical methane potential experiment under standard digestion conditions showed the methane yield of FWL to be 358 and 478 ml/g VS after 10 and 28 days of digestion, respectively, with an average methane content of 70%. Elemental analysis showed the chemical composition of FWL to be C(13.02)H(23.01)O(5.93)N(1). The highest methane yield of 403 ml/g VS was obtained at 35 degrees C due to the adaptation of seed microorganisms to mesophilic atmosphere, while methane yields at 25, 45 and 55 degrees C were 370, 351 and 275 ml/g VS, respectively, at the end of 20 days. Addition of alkalinity had a favorable effect on the methane yield. Dilution of FWL with salinity of 2g/l NaCl resulted in 561 ml CH(4)/g VS at the end of 30 days. Considering its high biodegradability (82.6%) and methane production potential, anaerobic digestion of FWL in bioreactor landfills or anaerobic digesters with a preferred control of alkalinity and salinity can be considered as a sustainable solution to the present emergent problem.     

Development of hybrid processes for the removal of volatile organic compounds,plasticizer, and pharmaceutically active compound using sewage sludge,waste scrap tires,and wood chips as sorbents and microbial immobilization matrices

Environmental Science and Pollution Research - This study evaluated the reutilization of waste materials (scrap tires, sewage sludge, and wood chips) to remove volatile organic compounds (VOCs)...     

Cooperative prey capture by young subsocial spiders: II. Behavioral mechanism

Subsocial spiders demonstrate an intermediate stage in the evolution of permanent sociality. Cooperative hunting is an important attribute of their sociality, but has not been documented in subsocial arthropods. After cannibalizing their mother, young of the subsocial spider Amaurobius ferox (Araneae, Amaurobiidae) remain together for several instars and feed communally. We monitored the collective prey capture behavior of the spiderlings. All the clutches showed collective capturing sequence (latency–orientation–moving–touching–seizing–feeding) toward the prey that was 10 times more massive than each individual. The first three individuals that exhibited attacking behavior were responsible for 90% of the total number of attacks, while 68% of the individuals within the group never exhibited attacks during the first 10 min following the introduction of prey into the communal web. First arriving individuals at the prey most often seized the antennae and legs of the prey, which probably facilitate access to the prey for subsequent individuals. The spiderlings that arrived later occupied more likely the abdomen and thorax, which contain more nutrition than the extremities occupied earlier. The individual apportionment of collective hunting behavior suggests a coordinated teamwork among individuals.     

Preparation of a highly sensitive enzyme electrode using gold nanoparticles for measurement of pesticides at the ppt level

A highly sensitive enzyme electrode was prepared based on gold nanoparticles for measurement of pesticides. Gold nanoparticles of 25-30 nm were synthesized on a glassy carbon electrode by double-pulse technique while the coverage was controlled by applied potential and time. The gold nanoparticles were modified to form a self-assembled monolayer, followed by covalent binding of tyrosinase. The TYR-AuNP-GC electrode was compared with bare GC, AuNP-GC, and modified AuNP-GC and TYR-Au (plate type) electrodes in terms of cyclic voltammetry. The voltammograms well represent the sensitivity of enzymatic oxidation of catechol, substrates for the enzyme activity. The prepared electrode integrated into a continuous flow system and was tested to detect pesticides, such as 2,4-D, atrazine, and ziram. Under the optimized conditions of the flow system, the electrode performed reasonably according to the inhibition mechanism in the concentration range of 0.001-0.5 ng mL(-1). The enhanced performance was attributed to the favored microenvironment for the enzyme activity provided by SAM on gold nanoparticles.     

Progress in decontamination by halophilic microorganisms in saline wastewater and soil

Environments with high-salt concentrations are often populated by dense microbial communities. Halophilic microorganisms can be isolated from different saline environments and different strains even belonging to the same genus have various applications. Wastewater and soil rich in both organic matter and salt are difficult to treat using conventional microorganisms typically found in wastewater treatment and soil bioremediation facilities. Studies on decontaminative capabilities and decontamination pathways of organic contaminants (i.e., aromatic compounds benzoate, cinnamate, 3-phenylpropionate, 4-hydroxybenzoic acid), heavy metals (i.e., tellurium, vanadium), and nutrients in the biological treatment of saline wastewater and soil by halophilic microorganisms are discussed in this review.