Remedial strategies for municipal solid waste management in China

The purpose of this investigation is to evaluate the current status and to identify the problems of municipal solid waste (MSW) management in China to determine appropriate remedial strategies. This is the second of two papers proposed on this topic. Major problems or difficulties identified in MSW management in China include MSW land, air, and water pollution, commingled collection, poor administration, shortage of funds, lack of facilities, and problems of training and public awareness. In order to solve these problems and to improve MSW management in China, remedial strategies in three areas are recommended: institutional reform, technology development, and legislation and administrative improvement. The primary principle involved in institutional reform is unifying legislative responsibilities into one body and developing a market mechanism for handling MSW. Composting, landfills, and incineration should be equally developed in accordance with China's needs. The feasibility of developing technology to handle MSW in China is discussed. Also recommended is the establishment of sound regulatory systems, including a service fee system, a source separation system, and a training program. China is presently undergoing economic and institutional reform at the national and local levels. Results of this study will provide useful information on MSW management in China.     

间歇式运行对人工湿地处理富营养化湖水的影响

针对五里湖富营养化水体,进行了中试规模人工湿地间歇式运行与连续式运行处理效果的比较研究,现场试验采用0.8 m3/m2·d的水力负荷.研究表明,采用间歇进水方式增强了人工湿地的复氧能力,出水溶解氧(DO)含量为2.6～4.5 mg/L,较连续进水方式平均提高了51.06%.间歇式进水对TN和NH4 -N的去除影响较大,与连续进水方式相比去除率分别提高了51.5%和30.5%;而对NO3-N、TP和CODMn的去除影响较小.采用间歇式运行TN的出水浓度较连续式运行稳定,受季节变化和进水浓度的影响较小,出水浓度＜2 mg/L;而间歇式运行对TP和CODMn出水浓度的稳定性影响不大.     

采用正交实验优化湿热法处理厨余垃圾的工艺条件

实验采用3因素3水平的正交实验设计方法,研究了湿热法处理厨余垃圾并使其饲料化的加工工艺中,时间、温度、加水量对厨余垃圾饲用价值的影响,选取粗蛋白、粗脂肪、粗纤维、粗灰分、钙和盐分为评价指标,确定反应的最佳工艺条件.实验结果表明,反应的最佳工艺条件为温度100℃、加水量50%、反应时间30 min.     

运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计

二次风口的合理布设是实现炉膛内气体混合均匀、反应完全的有效措施之一，运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计，借助PHOENICS软件模拟二次风口对炉内流场的影响。通过模拟发现，二次风口的布设可明显提高烟气的湍流程度．前后墙各设一排直径为0．04m的二次风口可以实现最佳的炉膛流场工况。     

室内霉菌污染原因及其控制对策

通过对建筑墙体内湿气迁移过程的研究，详细分析了霉菌污染产生的原因。通过夏、冬两季平均气候条件下沿墙厚度温度、相对湿度分布和湿积累量的具体计算，得出墙内的相对湿度将达到或超过70％，有时甚至处于饱和状态，从而为霉菌的生长提供了有利条件。基于分析结果，提出了对于室内霉菌污染的控制对策。     

含油污水的综合处理法及其应用

概述了竖向隔板分油法、蜂窝斜管分油法及磁性颗粒吸附过滤法 ,将这 3种方法结合处理某机修厂的含油污水 ,取得了满意效果。     

废锌锰电池真空蒸馏法去除汞的研究

废锌锰电池回收利用中的正交实验,研究蒸馏温度、系统压强和蒸馏时间对去除汞的综合影响;寻找去除汞的最优工艺条件.根据实验结果,使用真空蒸馏的方法处理锌锰电池优化的工艺参数为:蒸馏温度500～600℃,蒸馏时间60～80 min,系统压强3000～7000 Pa.     

渗滤液中污染物的粒度分布及其应用

渗滤液是一种难于处理的废水.论述了渗滤液中污染物的粒度分布.指出了不同粒度污染物中胶体态组分富含难降解有机物和重金属,其性质稳定,含量较高,对渗滤液的处理工艺选择和去除效果影响重大.最后对渗滤液的资源化进行了初步探讨.     

黑斑蛙Dmrt1基因的克隆及在不同组织中的表达

Dmrt基因家族是新近发现的一个与性别决定相关的基因家族,该家族成员都含有一个新的具有DNA结合能力的保守基序——DM结构域.本文采用简并PCR技术,扩增并克隆了黑斑蛙基因组中的DM结构域,经序列分析,获得了Dmrt家族成员rnDmrt1;进一步根据获得的rnDmrt1序列,设计一对特异引物,采用RT-PCR技术对成蛙不同组织Dmrt1基因的表达进行了研究.结果发现,rnDmrt1只在精巢中特异表达,在卵巢、脑、肝、心、肾及肌肉组织中无表达,显示Dmrt1基因在性别决定和分化中有重要功能. 图4参9     

The effect of ink types and printing processes on flotation deinking efficiency of wastepaper recycling

Wastepaper is the largest fraction of solid waste. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This paper investigated the effect of ink types and printing processes on flotation deinking. Examination of ink types in this study revealed that newsprint oil-based offset-cold and offset-heat inks contain substantial oil (45 to 60%) and resin (5 to 35%); water-based ink contains water (40%) and resin (polystyrene, 30%); and these inks are liquids with densities around 1 g/cm³ at 25 °C. On the other hand, photocopy and laser-print toners were found to be solid powders with particle diameters of about 20 μm, densities of 1 to 1.5 g/cm³, and a composition that consists primarily of styrene-acrylate copolymers (60 to 90%). Except for water-based ink, which is water soluble, all inks in their initial state are hydrophobic. It was found that for newsprint oil based offset-cold inks there is little change in their surface chemical properties, and their hydrophobic character is retained. These inks in the newsprint wastepaper pulp can be effectively removed by flotation. On the other hand, it was found that during the printing processes, the toner particles undergo polymerization (fusion) and oxidation with the subsequent formation of peroxide bonds due to exposure to heat, light, and oxygen (air). The fusion due to polymerization causes bonding to the paper fibers and the creation of larger toner particle sizes. The oxidation creates a greater polarity at the toner particle surface. These effects account for the poor efficiency in the flotation deinking of office waste. In order to improve office wastepaper recycling, it is evident, based on this study and policy considerations, that there is a need to find ways of improving the efficiency and effectiveness of flotation deinking by modification of the surface properties of printed toner particles, or designing new toner particles.