Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

2015—2018年河南省辖海河流域水质改善效果评价

分别采用单因子评价法、综合污染指数评价法和模糊综合评价法对2015—2018年河南省辖海河流域的水质改善效果进行评价分析。结果表明:3种方法的评价结果基本一致,2015—2018年河南省辖海河流域整体水质呈现改善趋势。但各方法侧重点有所不同。单因子评价结果显示,海河流域21项污染因子Ⅰ—Ⅲ类数量占比由2015年的69.63%增加至2018年的89.52%,劣Ⅴ类占比由2015年的15.13%减少至2018年的0.85%;海河流域综合污染指数由2015年的0.89降低至2018年的0.56,水质级别由中度污染改善为轻度污染,其中卫河、共产主义渠、大沙河、安阳河、汤河、马颊河的水质状况均有一定改善;模糊评价结果显示,NH₃-N和TP在9项评价因子中权重占比较大,是河南省辖海河流域的主要污染因子;2018年8条河流均达到Ⅰ—Ⅲ类水质。前2种评价方法适用于管理分析,模糊评价法可补充说明河流存在的问题,更适用于研究工作。     

京津冀城市群二氧化碳排放达峰研究

基于IPCC排放因子方法建立了2015—2019年京津冀城市群地级城市CO₂排放清单,基于经济增长与CO₂排放关系的脱钩系数法,得到京津冀城市群13个地级以上城市的脱钩情况,结合历史CO₂排放和脱钩情况提出的京津冀城市群达峰判别方法,对京津冀城市群地级以上城市CO₂排放达峰情况进行了判断。结果表明:近5年来,保定、张家口、秦皇岛、邢台、沧州、廊坊、衡水7市碳排放量暂未达到峰值状态;北京、天津、石家庄、承德、邯郸、唐山6个城市已经处于CO₂排放达峰状态。建议已经具备达峰条件的城市抓紧开展达峰行动方案,制定CO₂排放达峰目标。     

新兴污染物对剩余污泥厌氧发酵产氢的影响研究

厌氧发酵产氢是污泥资源化利用的一种重要途径,然而污水处理过程中新兴污染会通过各种途径转移至污泥中,影响污泥的后续处理。总结了抗生素、表面活性剂、工业添加剂、溴系阻燃剂（BFR）4种新兴污染物在污泥中的污染现状,阐述了新兴污染物对污泥发酵产氢的影响,并揭示了相关作用机制。同时,分析了新兴污染物在污泥发酵体系的降解转化规律。最后,对今后污泥中新兴污染物的研究做了展望,以利于污泥的资源化利用。     

河北坝上与坝下不同土地利用类型土壤入渗特征及其影响因素

为查明河北省坝上与坝下不同土地利用类型土壤入渗能力,选择张北县（坝上风蚀区）和阳原县（坝下水蚀区）作为典型研究区,采用微型圆盘入渗仪测量土壤入渗特性,并分析其主要影响因素。研究结果表明：（1）阳原县不同土地利用类型土壤渗透性能表现为：高盖度草地>低盖度草地>耕地>林地,张北县表现为：草地>耕地>灌木林地>防护林地;（2）不同入渗模型拟合度之间存在显著差异,其中Philip模型拟合效果最佳;（3）土壤初始入渗速率、稳定入渗速率、稳定入渗时间与容重呈极显著负相关关系,而与总孔隙度均呈极显著正相关关系。结果表明,该区草地土壤入渗能力最强,后期开展生态工程建设时应更加重视草地涵养水源的作用。     

含菌气溶胶扩散对人群的潜在影响风险

为分析生物气溶胶释放对人群潜在影响风险的情况,利用CALPUFF模型定量模拟了2019年7月24~8月20日中牧兰州生物药厂含菌气溶胶扩散、浓度空间分布、对人群潜在健康风险,并结合公开报道的检测数据开展验证.结果显示：生物药厂的含菌气溶胶排放源附近高值区主要集中于厂区四周,影响范围主要以厂区为中心,并向四周逐渐扩散;检测结果中兰州兽研所1#,兰州大学2#地区健康风险比例41.49：1,在模拟的相对风险大小的误差区间（36.15±8.48）范围内,说明本研究含菌气溶胶对人群潜在影响风险的模拟结果可信.     

磁性有序介孔碳的制备及其对水中双酚A的吸附

采用水热法成功制备了磁性有序介孔碳（Fe-OMC）,用于吸附水中双酚A （BPA）.采用高倍投射电镜、X射线衍射仪、傅里叶红外光谱仪、比表面积分析仪和振动样品磁强计对Fe-OMC进行表征.结果表明,该吸附剂具备较大的比表面积、独特的有序介孔孔道结构、丰富的含氧官能团以及较强的超顺磁性.Fe-OMC能够高效地吸附去除水中的BPA,平衡吸附量可达72.62mg/g,经过外加磁场分离回收后依旧具备较好的吸附性能.随着BPA浓度从1mg/L提高到20mg/L,其平衡吸附量由8.33mg/g增至91.78mg/g.随着pH值的升高呈现出先降低后升高再降低的趋势,最高吸附量出现在pH=8（75.34mg/g）.Fe-OMC对BPA的吸附过程可用准二级吸附动力学模型和Langmuir吸附等温模型进行描述.计算的热力学参数表明,Fe-OMC对BPA的吸附过程是自发进行的放热过程.     

黄河流域水污染排放特征及污染集聚格局分析

掌握污染源排放特征及其空间差异,是在流域尺度提升水污染治理水平的重要基础.该研究分别从污染源的活动水平（简称“活动水平”）、污染物产生、污染物去除和污染物排放4个方面选取了28个指标,对黄河流域60个市州主要水污染物排放特征开展了现状评价和聚类分析.采用污染分布的地理集中度指数表征各市州污染集聚格局,并利用空间分析模型Global Moran's I和G_i*指数判断污染排放的空间集聚趋势与冷热点地区.结果表明:按照水污染排放特征的差异,黄河流域不同地区在水污染格局上可划分为高排放强度区、高排放绩效区、污染集聚区和低排放绩效区;水污染物排放与经济发展格局分布一致,上游、中游到下游地区呈现明显的阶梯型分布,上游地区单位水资源利用效率和排放绩效低,下游地区区域性污染集聚效应明显;山西省、河南省和山东省沿黄城市在空间上表现为区域性连片污染集聚,集中分布在晋中城市群和中原城市群.针对当前黄河流域水污染排放特征和空间集聚格局,建议制定统一的生态环境保护与治理策略,加强中下游城市群的污染协同控制.