7种拟除虫菊酯农药对卤虫的急性毒性研究

为了研究7种拟除虫菊酯农药对美国大盐湖卤虫(GSL Artemia)的急性毒性效应,挑选18~24 h内孵出的卤虫,继续培养24 h后得到Ⅱ~Ⅲ龄卤虫无节幼体,将其暴露于所设浓度梯度的拟除虫菊酯溶液中进行24 h急性毒性实验,记录卤虫无节幼体在各浓度溶液中的死亡情况,并将所得数据进行Probit分析。结果表明,卤虫对不同拟除虫菊酯的敏感性相差较大。氯菊酯、氯烯炔菊酯、炔咪菊酯、胺菊酯、联苯菊酯、高效氯氟氰菊酯和溴氰菊酯对卤虫的24 h半致死浓度(24 h-LC50)分别为4.68、14.82、18.12、38.21、>100、>100和>100 mg.L-1。因此,在含有卤虫的盐水环境中,应尽量避免使用毒性较高的氯菊酯,而选择使用联苯菊酯、高效氯氟氰菊酯和溴氰菊酯等毒性较低的农药。     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

The size distribution of airborne bacteria and human pathogenic bacteria in a commercial composting plant

•Bacterial concentrations from eight stages were 10⁴–10⁵copies/m³. •Diameter influenced clustering of bacterial and HPB lineages. •Dg of 8 HPB ranged from 2.42 to 5.09 μm in composting areas. •Dg of 8 HPB ranged from 3.70 to 8.96 μm in packaging areas. •HPB had high concentrations and small sizes in composting areas. Composting plants are regarded as one of the important sources of environmental bioaerosols. However, limitations in the size distribution of airborne bacteria have prevented our comprehensive understanding of their risk to human health and their dispersal behavior. In this study, different sizes of airborne bacteria were collected using an eight-stage impactor from a full-scale composting facility. Size-related abundance and communities of airborne bacteria as well as human pathogenic bacteria (HPB) were investigated using 16S rRNA gene sequencing coupled with droplet digital PCR. Our results indicate that the bacterial concentrations from the eight stages were approximately 10⁴–10⁵copies/m³. Although no statistical correlation was detected between the particle size and the Shannon index, the influence of size on bacterial lineages was observed in both composting and packaging areas. For airborne bacteria from different stages, the dominant phyla were Firmicutes, Proteobacteria, and Actinobacteria, and the dominant genera was Bacillus. Seven out of eight HPB with a small geometric mean aerodynamic diameter had a high concentration in composting areas. Based on diameters of 2.42 to 5.09 μm, most HPB in the composting areas were expected to be deposited on the bronchus and secondary bronchus. However, in the packaging areas, the deposition of HPB (diameters 3.70 to 8.96 μm) occurred in the upper part of the respiratory tract. Our results on the size distribution, abundance, and diversity of these bacteria offer important information for the systematic evaluation of bacterial pathogenicity and the potential health impacts on workers in composting plants and the surrounding residents.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

PSAT和BPA在电力系统潮流计算中的对比研究

针对当前电力系统分析程序存在差异的问题,从潮流计算角度,对比研究了国内目前使用较为普遍的2款潮流计算程序(PSAT和PSD-BPA),分析了收敛误差、发电机分接头、负荷比例等不同初值条件设置对其潮流计算结果的影响。分析结果表明:PSAT在建模、可视化和自定义方面具有一定优势,比较适合小规模电网仿真和自定义元件模型研究;而BPA的计算速度快,计算精度高,比较适合大规模电网仿真。     

Effect of effluent organic matter on ozonation of bezafibrate

The influence of three effluent organic matter (EfOM) model compounds, humic acid (HA), bovine serum albumin (BSA), and sodium alginate (AGS), on the ozonation of bezafibrate (BF), a typical pharmaceutical and personal care product (PPCP), was investigated. The results show that ozonation efficiently removed BF from aqueous solution with removal efficiencies>95% within 8 min for all conditions. The reaction rate of BF decreased with increasing model compounds concentrations and the influence was more pronounced for HA and BSA, while less pronounced for AGS. Although BF concentration was significantly reduced, the degree of mineralization achieved was only approximately 11%. The addition of HA and BSA improved the mineralization of the solution, while the influence of AGS was minor. The acute toxicity of BF solution during ozonation was determined using the Luminescent bacteria test, and the toxicity exhibited an initial increase and a successive reduction. An overall decreased acute toxicity was observed with an increase of HA. The presence of BSA increased the formation rate of toxicity intermediates and resulted in inhibition peak forward.     

曝气生物滤池中的亚硝酸盐积累及其影响因子

通过模型试验研究了曝气生物滤池脱氮过程中的亚硝酸盐积累现象,考察了运行条件对亚硝酸盐积累的影响.试验结果表明,曝气生物滤池在滤速1～2m/h、气水比3:1、水温20.5℃～26.5℃、进水氨氮负荷0.26～0.62kg/(m³·d)、总氮负荷0.28～0.63kg/(m³³·d)和0.18～0.42kg/(m³·d)反应器内反应液和处理水连续监测结果、反应器内含氮化合物空间分布分析以及微生物数量及活性测定结果表明,反应器中出现了明显的亚硝酸盐积累现象,表现出显著的短程硝化反硝化特征.初步分析探讨了亚硝酸盐积累的形成机理和运行条件对亚硝酸盐积累的影响,认为反冲洗过程是最主要的影响因素,而曝气生物滤池的结构特征和运行方式是其能够出现亚硝酸盐积累,并进行短程硝化反硝化脱氮的主要原因.     

低施磷水平下不同施肥对太湖地区黄泥土磷迁移性的影响

对太湖地区水稻土上长达13年的长期不同施肥处理的某试验田进行了土壤全磷、树脂磷和水溶性磷的测定分析.不同处理的年施磷量为0～53kg/(hm²·a),土壤全磷为0.3～0.5g·k^-1.根据土壤磷素的质量平衡,计算表明该水稻土存在的磷素流失量为2～8kg/(hm²·a),单施化肥下的流失量最大,为配施有机肥处理的2～4倍;水溶性磷的比率在0.2%～0.4%间,且不同施肥实践对其的影响不明显.但单施化肥有使亚表层树脂磷和水溶性磷含量提高的倾向.长期施用化肥配施大量鲜猪粪使树脂磷含量提高20～40 mg·kg^-1,但与长期施用化肥配施秸秆的处理一样没有发生在有机质增加下的磷活化而提高磷流失.这些说明本地区长期单施化肥的水稻土中可能存在强烈的磷流失,且水稻土磷流失并不以水溶解发生.为了防止水稻土磷的强烈水流失而加剧农业非点源污染,要避免长期单施化肥,而应坚持和推广配施适量有机肥.     

"深圳-巴彦浩特"地理样带土地利用与水旱灾害研究

在建立1990-2000年“深圳-巴彦浩特“地理样带水旱灾害数据库的基础上,结合样带1995、2000年两期的土地利用数据,分析了样带水旱灾害的区域差异,及其与样带土地利用时空格局的关系.结果表明,样带水旱灾害呈现较强的南北差异,北方以旱灾为主,南方以水灾为主;土地利用结构对样带水旱灾害有较强的影响,土地利用类型复杂的县市有较高的水旱灾害发生率,而土地利用类型单一的县市则受水旱灾害影响较小.水灾主要出现在样带南部多种土地利用类型混杂的县市,特别是城镇建设用地比例较高的地区,水灾相对更为频繁;旱灾在缺乏灌溉水源且以耕地和草地为主要土地利用类型的区域发生频率较高.     

Characteristics of geological hazards in South China coastal areas and impact on regional sustainable development

Prevention and treatment of geological hazards is important for the sustainable development of human society. Surface geological hazards alone caused direct economic losses of ¥3.47 billion, with 768 deaths and 785 injuries in Guangdong Province, South China, from 1994 to 2005. The major factors causing geological hazards can be categorised into three types: geo-environmental, climatic-meteorological and human activity. Accompanied by rapid economic development and population growth, human activities can cause geological hazards that are as serious as those caused by natural factors. The authors propose some suggestions for prevention and treatment of geological hazards to achieve sustainable development on the Chinese coast.