腐植酸中不同分子量组分与As(Ⅲ)的络合性能

采用超滤方法将腐植酸（HA）分成5个不同分子量组分,利用平衡透析法研究HA中不同分子量组分与As（III）的络合特征和作用机理,计算络合过程的条件分配系数、表观稳定常数.结果表明,腐植酸组分的分子量对HA与As（III）的络合过程有显著的影响,当分子量小于10kDa时,HA与As（III）络合能力明显强于其他条件.其中羧基和酚羟基在HA与砷络合中起重要作用,为主要络合位点.采用Scatchard分析和双位点配体模型对络合结果进行拟合,发现HA中不同分子量组分和As（III）的络合过程中均存在强和弱2种络合位点.     

滦河秋季大型底栖动物群落结构空间格局与关键环境影响因子识别

掌握水生生物的空间分布特征及其关键影响因子是科学制定生物多样性保护策略的基础.于2016年秋季对滦河53个样点开展了大型底栖动物和环境因子的现场调查,分析了大型底栖动物群落结构与空间分布特征,并识别出影响大型底栖动物物种空间分布的关键环境因子.结果表明:①滦河（河北省）共采集并鉴定出大型底栖动物206种,隶属于8纲22目70科144属,以纹石蚕（Hydropsyche sp.）和东方蜉蝣（Ephemera orientalis）为优势种.②根据滦河大型底栖动物群落结构相似性,53个样点在空间上被分为3组.第1组分布在滦河干流的中下游及支流下游,无指示物种;第2组分布在支流上游,指示种为纹石蚕、朝大蚊（Antocha sp.）和中华小长臂虾（Palaemonetes sinensis）;第3组分布在滦河干流中上游,指示种为东方蜉蝣和中华齿米虾（Neocaridina denticulate sinensis）.③第3组的分类单元数显著高于第1组和第2组;第1组的多样性指数显著高于第2组;第1组的均匀度指数显著高于其他2组.单因素方差分析（one-way ANOVA）发现,pH、TN、底质、河道变化、水质状况和河岸土地利用类型等环境因子在第2组与第3组之间差异显著,第2组明显高于第3组.典范对应分析（CCA）表明,栖境复杂性、河水水量状况和河岸土地利用类型是影响滦河大型底栖动物空间分布的关键环境因子.研究显示,降低河岸带干扰强度、恢复河道生境多样性是未来滦河大型底栖动物多样性保护恢复的重要管理措施.      

Well-to-wheels greenhouse gas and air pollutant emissions from battery electric vehicles in China

Mitigation and Adaptation Strategies for Global Change - Electric vehicles (EVs) play a crucial role in addressing climate change and urban air quality concerns. China has emerged as the global...     

牛粪-化肥配施对水稻田氮磷迁移转化的影响

在控制外源N输入量相同的前提下,通过田间小区实验,探讨有机肥与化肥不同施用量（牛粪施用量：5,10,20t/hm²）对稻田田间土-水界面氮磷迁移转化特征的影响.结果表明：控制稻田水中NH₄⁺-N、NO₃^--N、TN和TP输出的最佳时期分别为施肥后的第5,30,7,20d,且TN和TP浓度随时间变化符合单指数衰减方程（0.7444≤R²≤0.9724;1.1×10^-6≤F≤0.0055）.采用牛粪部分代替化肥的施肥方式,在一定范围内能降低稻田退水中TN、TP输出负荷（41.8%、36.0%、64.3%;20.3%、39.1%、48.9%）,还可以降低稻田水中N/P,降低水体富营养化风险.同时,牛粪的施用可提高土壤中脲酶和磷酸酶的含量,促进氮磷向植物可吸收形态转化.综合经济成本和生态效益核算,采用10t有机肥代替无机肥的处理是相对经济环保的施肥方法,该施肥方式下,氮磷年输出负荷分别为17.70,1.26kg/hm².     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.