Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Assessment of spatial variation of cesium-137 in small catchments

Surface contamination by bomb-derived and Chernobyl-derived 137Cs has been subject to changes due to physical decay and lateral transport of contaminated soil particles, which have resulted in an on-going transfer of radionuclides from terrestrial ecosystems to surface water, river bed sediments, and flood plains. Knowledge of the different sources of spatial variation of 137Cs is particularly essential for estimating 137Cs transfer to fluvial systems and for successfully applying 137Cs as an environmental tracer in soil erosion studies. This study combined a straightforward sediment redistribution model and geostatistical interpolation of point samples of 137Cs activities in soil to distinguish the effects of sediment erosion and deposition from other sources of variation in 137Cs in the small Mochovce catchment in Slovakia. These other sources of variation could then be interpreted. Besides erosion and deposition processes, the initial pattern of 137Cs deposition, floodplain sedimentation, and short-range spatial variation were identified as the major sources of spatial variation of the 137Cs inventory.     

A GPS-based system for recording the flight paths of birds

 The GPS recorder consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. Currently, it has a weight of 33 g. The recorder works reliably with a sampling rate of 1/s and with an operation time of about 3 h, providing time-indexed data on geographic positions and ground speed. The data are downloaded when the animal is recaptured. Prototypes were tested on homing pigeons. The records of complete flight paths with surprising details illustrate the potential of this new method that can be used on a variety of medium-sized and large vertebrates. Received: 2 February 2000 / Accepted in revised form: 17 April 2000     

Monitoring, modelling and environmental exposure assessment of industrial chemicals in the aquatic environment

Monitoring and laboratory data play integral roles alongside fate and exposure models in comprehensive risk assessments. The principle in the European Union Technical Guidance Documents for risk assessment is that measured data may take precedence over model results but only after they are judged to be of adequate reliability and to be representative of the particular environmental compartments to which they are applied. In practice, laboratory and field data are used to provide parameters for the models, while monitoring data are used to validate the models' predictions. Thus, comprehensive risk assessments require the integration of laboratory and monitoring data with the model predictions. However, this interplay is often overlooked. Discrepancies between the results of models and monitoring should be investigated in terms of the representativeness of both. Certainly, in the context of the EU risk assessment of existing chemicals, the specific requirements for monitoring data have not been adequately addressed. The resources required for environmental monitoring, both in terms of manpower and equipment, can be very significant. The design of monitoring programmes to optimise the use of resources and the use of models as a cost-effective alternative are increasing in importance. Generic considerations and criteria for the design of new monitoring programmes to generate representative quality data for the aquatic compartment are outlined and the criteria for the use of existing data are discussed. In particular, there is a need to improve the accessibility to data sets, to standardise the data sets, to promote communication and harmonisation of programmes and to incorporate the flexibility to change monitoring protocols to amend the chemicals under investigation in line with changing needs and priorities.     

Nitrogen recovery in an integrated system for wastewater treatment and tilapia production

An integrated system, consisting of Up-flow Anaerobic Sludge Blanket (UASB)-duckweed-tilapia ponds was used for recovery of sewage nutrients and water recycling. A UASB reactor with 40 liter working volume was used as pre-treatment unit followed by a series of three duckweed ponds for nitrogen recovery. The treated effluent and duckweed biomass was used to feed fishponds stocked with Nile tilapia (Oreochromis niloticus). The UASB reactor was fed with raw, domestic sewage at 6 h hydraulic retention time. The three duckweed ponds were stocked with Lemna gibba and fed with UASB effluent at 15 days hydraulic retention time. Nitrogen recovery from UASB effluent via duckweed biomass represented 81% of total nitrogen removal and 46.5% from the total nitrogen input to the system. In subsequent fishponds the nitrogen recovery from duckweed as fish feed was in the range of 13.4–20%. This nitrogen in fish biomass represented 10.6–11.5 g N from the total nitrogen in the raw sewage fed to the UASB reactor. The growth performance of tilapia (Oreochromis niloticus) showed specific growth rates (SGR) in the range of 0.53–0.97. The range of feed conversion ratio (FCR) and protein efficiency ratio (PER) were 1.2–2.2 and 2.1–2.28, respectively. The results of the experiments showed total fish yield and net fish yield in the range of 17–22.8 ton/ha/y and 11.8–15.7 ton/ha/y respectively. In conclusion UASB-duckweed-tilapia ponds provide marketable by-products in the form of duckweed and fish protein, which represent a cost recovery for sewage treatment.     

Fish bioassay monitoring of waste effluents

Spills of toxic materials into bodies of water receiving industrial waste discharges can be prevented only if frequent or continuous assessments of effluent quality can be made. Currently available methods can automatically measure individual physical or chemical waste components but cannot assess toxicity caused by the interaction of components or the presence of an unsuspected material. Aquatic organisms, in contrast, respond to their total environment and in this way integrate the effects of all the various chemical and physical waste parameters.This study evaluates the possibility of using the continuously and automatically recorded responses of fish to monitor the toxicity of industrial waste effluents. A review of previously developed toxicity monitoring systems is followed by a field evaluation of a method that uses the computer-monitored ventilatory patterns of 12 bluegills (Lepomis macrochirus Rafinesque) to monitor the toxicity of an industrial waste effluent as it flows into a river. No known toxic spills occurred in the effluent during the operation of this system, but acetone added to the effluent waste caused responses from the fish at concentrations which peaked near the 96-hr LC₅₀ level. Some responses were also noted when no known toxicant was present; these were related to environmental disturbances and system design problems. Recommendations are made for the design of future biologic monitoring units.     

Mass Spectrometric Detection and Identification of Polar Pesticides and their Degradation Products - A Comparison of Different Ionization Methods

Due to increasing use of polar pesticides, they are found together with their degradation products in ground- and surface waters serving for drinking water treatment. The triazine derivatives acetamido-atrazine, ametryne, atrazine, cyanazine, deethylatrazine, deethyldeisopropyl-hydroxyatrazine, deethyl-hydroxyatrazine, deisopropyl-atrazin, deisopropyl-hydroxyatrazine, desmetryn, hydroxyatrazine, prometryne, propazine, simazine, terbumeton, terbutryne and terbutylazine, and the pesticides 2,4-D, dichlorprop, isoproturon, diuron, metolachlor, glyphosate, metsulfuronmethyl and dalapon, all of them belonging to this type of pesticides, have been studied. For determination of triazine derivatives UV detection by means of diode array detector (DAD) as well as mass spectrometric (MS) detection coupled by thermospray interface (TSP) have been used successfully after liquid chromatoraphic (LC) separation. Interfaces like thermospray (TSP), electrospray (ESP) and atmospheric pressure chemical ionisation (APCI) were examined with regard to their suitability for substance-specific detection of polar pesticides by flow injection analysis (FIA) with MS- and tandem mass spectroscopic detection (MS/MS) without preceding LC separation. Optimised detection conditions for these pesticides using FIA are presented, and solutions for occurring problems are offered.     

Evaluation of Selected Gaseous Halocarbons for Use in source Test Performance Audits

A repository of 38 gaseous organic compounds in compressed gas cylinders has been established by EPA. This repository was established to provide standards for source test performance audits, that is, quantitative quality assurance tests. Among these compounds are ten halogenated organic species, which are the focus of this paper.

Stability studies of all ten compounds have been performed to determine the feasibility of using them as performance audit standards. Results indicate that all of the halocarbons tested are adequately stable to be used as reliable audit standards.

Subsequent to completion of stability studies, four of the ten halocarbons were used in source test performance audits. Results are available at this time for two of the four compounds; the results show agreement within 10% of the concentrations previously established by Research Triangle Institute.     

Mechanisms of purple moor-grass (Molinia caerulea) encroachment in dry heathland ecosystems with chronic nitrogen inputs

We analysed growth strategies (biomass allocation, nutrient sequestration and allocation) of heather (Calluna vulgaris) and purple moor-grass (Molinia caerulea) seedlings in monocultures and mixtures in relation to N, P, and N + P fertilisation in a greenhouse experiment in order to simulate a heath’s pioneer phase under high airborne nitrogen (N) loads. N fertilisation increased the total biomass of both species in monocultures. In mixtures, M. caerulea sequestered about 65% of the N applied, while C. vulgaris suffered from N shortage (halving of the total biomass). Thus, in mixtures only M. caerulea will benefit from airborne N loads, and competition will become increasingly asymmetric with increasing N availability. Our results demonstrate that the heath’s pioneer phase is the crucial tipping point at which the competitive vigour of M. caerulea (high belowground allocation, efficient use of belowground resources, shortened reproductive cycles) induces a shift to dominance of grasses under increased N availability.