Biodegradable Composite Foams of PLA and PHBV Using Subcritical CO<Subscript>2</Subscript>

One key strategy for increasing the application potential for biodegradable plastics lies in improving the physical and mechanical characteristics, which can be attained by inducing a cellular morphology in the pure polymer with the aid of a blowing agent, as well as by blending two or more polymers with the desirable properties. This paper examines the effect that blending two biodegradable polymers has on the thermal properties and morphology of the resultant foams blown with carbon dioxide (CO₂). Polylactic acid (PLA), polyhydroxybutyrate-co-valerate (PHBV) and blends of both were foamed and characterized in terms of thermal characteristics, relative density, cell size, and foam morphology. The results indicate that although PLA and PHBV are immiscible, the presence of small quantities of PHBV (25 wt%) could lead to low density foams with finer, more uniform cells. Furthermore, the crystallinity of PHBV was found to be unaffected by the presence of PLA in the composite, which supports the immiscibility of PLA and PHBV.     

Life-cycle assessment of municipal solid waste management alternatives with consideration of uncertainty: SIWMS development and application

This paper describes the development and application of the Stochastic Integrated Waste Management Simulator (SIWMS) model. SIWMS provides a detailed view of the environmental impacts and associated costs of municipal solid waste (MSW) management alternatives under conditions of uncertainty. The model follows a life-cycle inventory approach extended with compensatory systems to provide more equitable bases for comparing different alternatives. Economic performance is measured by the net present value. The model is verified against four publicly available models under deterministic conditions and then used to study the impact of uncertainty on Sydney’s MSW management ‘best practices’. Uncertainty has a significant effect on all impact categories. The greatest effect is observed in the global warming category where a reversal of impact direction is predicted. The reliability of the system is most sensitive to uncertainties in the waste processing and disposal. The results highlight the importance of incorporating uncertainty at all stages to better understand the behaviour of the MSW system.     

Dissolution of beryllium in artificial lung alveolar macrophage phagolysosomal fluid

Dissolution of a lung burden of poorly soluble beryllium particles is hypothesized to be necessary for development of chronic beryllium lung disease (CBD) in humans. As such, particle dissolution rate must be sufficient to activate the lung immune response and dissolution lifetime sufficient to maintain chronic inflammation for months to years to support development of disease. The purpose of this research was to investigate the hypothesis that poorly soluble beryllium compounds release ions via dissolution in lung fluid. Dissolution kinetics of 17 poorly soluble particulate beryllium materials that span extraction through ceramics machining (ores, hydroxide, metal, copper-beryllium [CuBe] fume, oxides) and three CuBe alloy reference materials (chips, solid block) were measured over 31 d using artificial lung alveolar macrophage phagolysosomal fluid (pH 4.5). Differences in beryllium-containing particle physicochemical properties translated into differences in dissolution rates and lifetimes in artificial phagolysosomal fluid. Among all materials, dissolution rate constant values ranged from 10⁻⁵ to 10⁻¹⁰ g cm⁻² d⁻¹ and half-times ranged from tens to thousands of days. The presence of magnesium trisilicate in some beryllium oxide materials may have slowed dissolution rates. Materials associated with elevated prevalence of CBD had faster beryllium dissolution rates [10⁻⁷-10⁻⁸ g cm⁻² d⁻¹] than materials not associated with elevated prevalence (p < 0.05).     

Assessment of metal status in drainage canal water and their bioaccumulation in Oreochromis niloticus fish in relation to human health

The purpose of this study was to assess metal concentrations (Al, Cd, Pb, Hg and Ni) in Sabal drainage canal (Al-Menoufiya Province, River Nile Delta, Egypt) water as well as their accumulation in some selected organs (skin, muscles and kidneys) of Oreochromis niloticus fish to evaluate their hazard levels in relation to the maximum residual limits for human consumption. Drainage canal water was found to be heavily polluted with metals which far exceeded the permissible limits. It was found that metals accumulated in organs of O. niloticus in concentrations higher than those of canal water. Kidneys of O. niloticus contained the highest concentrations of the detected metals, while skin appeared to be the least preferred site for the bioaccumulation of metals as the lowest metals concentrations were detected in this tissue. The present study shows that fish organs contained high levels of metals exceeding the permissible limits values. Metals in muscle of fish were higher than the maximum permissible concentrations for human consumption. Thus, consuming fish caught from drainage canals is harmful to the consumers.     

Characterization of ionic composition of TSP and PM10 during the Middle Eastern Dust (MED) storms in Ahvaz, Iran

Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ～10?μm or less (PM(10)) during dust storms in Ahvaz in April-September 2010. TSP and PM(10) samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM(10) were 1,481.5 and 1,072.9?μg/m(3), respectively. Particle concentrations during the Middle Eastern Dust (MED) days were up to four times higher than those in normal days. Ionic components contributed to only 9.5% and 11.3% of the total mass of TSP and PM(10), respectively. Crustal ions were most abundant during dust days, while secondary ions were dominant during non-dust days. Ca(2+)/Na(+) and Cl(-)/Na(+) ratios can be considered as the indicators for identification of the MED occurrence. It was found that possible chemical forms of NaCl, (NH(4))(2)SO(4), KCl, K(2)SO(4), CaCl(2), Ca(NO(3))(2), and CaSO(4) may exist in TSP. Correlation between the anionic and cationic components suggests slight anion and cation deficiencies in TSP and PM(10) samples, though the deficiencies were negligible.     

Hospital site selection using fuzzy AHP and its derivatives

Environmental managers are commonly faced with sophisticated decisions, such as choosing the location of a new facility subject to multiple conflicting criteria. This paper considers the specific problem of creating a well-distributed network of hospitals that delivers its services to the target population with minimal time, pollution and cost. We develop a Multi-Criteria Decision Analysis process that combines Geographical Information System (GIS) analysis with the Fuzzy Analytical Hierarchy Process (FAHP), and use this process to determine the optimum site for a new hospital in the Tehran urban area. The GIS was used to calculate and classify governing criteria, while FAHP was used to evaluate the decision factors and their impacts on alternative sites. Three methods were used to estimate the total weights and priorities of the candidate sites: fuzzy extent analysis, center-of-area defuzzification, and the α-cut method. The three methods yield identical priorities for the five alternatives considered. Fuzzy extent analysis provides less discriminating power, but is simpler to implement and compute than the other two methods. The α-cut method is more complicated, but integrates the uncertainty and overall attitude of the decision-maker. The usefulness of the new hospital site is evaluated by computing an accessibility index for each pixel in the GIS, defined as the ratio of population density to travel time. With the addition of a new hospital at the optimum site, this index improved over about 6.5 percent of the geographical area.     

Characterization of the Khamaseen (spring) dust in Jordan

During the spring each year, the Eastern Mediterranean is affected by Khamaseen dust cyclones sourced from the North African Sahara. In order to characterize Khamaseen dust in Jordan, we collected dust from ten localities during the spring of 2006. The collected dust was analyzed for grain size, mineralogy, and chemical composition. The dust is predominantly aluminosilicates (clay minerals and feldspars), quartz and carbonates with minor amounts of phosphate. The particles are mostly subrounded to subangular and generally between 5 and 20 μm in size. The majority of the elements analyzed have a natural abundance and distribution. However, several elements such as As, Cd, Cr, Cu, Pb, Se and Zn have higher than natural abundances due to anthropogenic enrichment by various enrichment factors. The analyzed dust samples are chemically homogenous, indicating a similar provenance and good mixing by the Khamaseen winds. The rare earth elements patterns are similar to those of the upper continental crust composition and average shale. Total amount of dust deposited on Jordan during the spring of 2006 is around 0.3 million tons.     

Changes in quality of groundwater with seasonal fluctuations： an example from Ghor Sail area, southern Dead Sea coastal aquifers, Jordan

The demand for water resources in the area south of the Dead Sea due to continued development, especially at the Arab Potash Company （APC） for production and domestic purposes necessitates that water quality in the area be monitored and evaluated based on the local geology and hydrogeology. The objective of this paper is to monitor seasonal fluctuations of groundwater and to determine how fluctuation in the water levels will affect the groundwater quality. Groundwater levels were found to be influenced by rainfall and pumping of water from the wells for domestic and industrial use. Twenty water samples were collected from different wells and analyzed for major chemical constituents both in pre- and post-seasons to determine the quality variation. Chemical constituents are significantly increased after post-season recharge. According to the overall assessment of the area, water quality was found to be useful for drinking, irrigation and industry.     

Changes in quality of groundwater with seasonal fluctuations: an example from Ghor Sari area, southern Dead Sea coastal aquifers, Jordan

The demand for water resources in the area south of the Dead Sea due to continued development, especially at the Arab Potash Company (APC) for production and domestic purposes necessitates that water quality in the area be monitored and evaluated based on