Non-intrusive characterization methods for wastewater-affected groundwater plumes discharging to an alpine lake

Streams and lakes in rocky environments are especially susceptible to nutrient loading from wastewater-affected groundwater plumes. However, the use of invasive techniques such as drilling wells, installing piezometers or seepage meters, to detect and characterize these plumes can be prohibitive. In this work, we report on the use of four non-intrusive methods for this purpose at a site in the Rocky Mountains. The methods included non-invasive geophysical surveys of subsurface electrical conductivity (EC), in-situ EC measurement of discharging groundwater at the lake-sediment interface, shoreline water sampling and nutrient analysis, and shoreline periphyton sampling and analysis of biomass and taxa relative abundance. The geophysical surveys were able to detect and delineate two high-EC plumes, with capacitively coupled ERI (OhmMapper) providing detailed two-dimensional images. In situ measurements at the suspected discharge locations confirmed the presence of high-EC water in the two plumes and corroborated their spatial extent. The nutrient and periphyton results showed that only one of the two high-EC plumes posed a current eutrophication threat, with elevated nitrogen and phosphorus levels, high localized periphyton biomass and major shifts in taxonomic composition to taxa that are commonly associated with anthropogenic nutrient loading. This study highlights the need to use non-intrusive methods in combination, with geophysical and water EC-based methods used for initial detection of wastewater-affected groundwater plumes, and nutrient or periphyton sampling used to characterize their ecological effects.     

Low NOx,High Efficiency Multistaged Burner: Fuel Oil Results

A multistaged combustion burner designed for in-furnace NO_x control and high combustion efficiency is being evaluated for high nitrogen content fuel and waste incineration application in a 0.6 MW package boiler simulator. A low NO_x precombustion chamber burner has been reduced in size by approximately a factor of two (from 600 to 250 ms first-stage residence time) and coupled with (1) air staging, resulting in a three-stage configuration, and (2) natural gas fuel staging, yielding up to four stolchlometric zones. Natural gas, doped with ammonia to yield a 5.8 percent fuel nitrogen content, and distillate fuel oil, doped with pyridine to yield a 2 percent fuel nitrogen content, were used to simulate high nitrogen content fuel/waste mixtures. The multistaged burner reduced NO emissions by 85 percent from emission levels from a conventional unstaged burner mounted on a commercial package bollerTA minimum NO emission level of 110 ppm was achieved in the fuel oil tests, from a level of 765 ppm for conventional firing. This is compared with a 160 ppm minimum NO level achieved in gaseous fuel tests, from an uncontrolled level of 1000 ppm. Boiler fuel staging, or reburnlng, appears to be superior to air staging for high combustion efficiency due to its minimal fuel-rich core and second flame front in the boiler.     

Penetration of submicron amino-functionalized graphene quantum dots in plant stomata,implication for the depollution of atmospheric soot particles

Environmental Chemistry Letters - Plants remove efficiently atmospheric pollution by soot particles, yet the mechanisms used by leaves to capture soot particles are unclear. Here, we studied the...     

Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

What motivates OCB? Insights from the volunteerism literature

This paper argues that taking a functionalist perspective can contribute to a more complete understanding of why employees engage in organizational citizenship behavior (OCB). Informed by the volunteerism literature, a number of other‐oriented and self‐oriented functions are identified as predictors of OCB including value‐expression, social, and career‐related motives. Copyright © 2010 John Wiley & Sons, Ltd.     

Occupational and environmental aerosol exposure assessment: a scientific journey from the past, through the present and into the future

This paper reviews how aerosol exposure assessment, for people in both working and living environments, has evolved over the years. It charts the main scientific developments that led to progressively improved ways of thinking and methods to assess exposure to airborne particulate matter in a manner more relevant to human health. It has been a long scientific journey as one generation of pioneering contributors has handed off to the next. In the process a consistent rationale has emerged, producing aerosol sampling criteria--and in turn exposure standards--which have been increasingly relevant to actual human exposures. The journey continues as a new generation of scientists steps up to deal with the new challenges that are emerging. An appreciation of the history of what went before is essential to charting the most effective path looking forward.     

Defending the scientific integrity of conservation‐policy processes

Government agencies faced with politically controversial decisions often discount or ignore scientific information, whether from agency staff or nongovernmental scientists. Recent developments in scientific integrity (the ability to perform, use, communicate, and publish science free from censorship or political interference) in Canada, Australia, and the United States demonstrate a similar trajectory. A perceived increase in scientific‐integrity abuses provokes concerted pressure by the scientific community, leading to efforts to improve scientific‐integrity protections under a new administration. However, protections are often inconsistently applied and are at risk of reversal under administrations publicly hostile to evidence‐based policy. We compared recent challenges to scientific integrity to determine what aspects of scientific input into conservation policy are most at risk of political distortion and what can be done to strengthen safeguards against such abuses. To ensure the integrity of outbound communications from government scientists to the public, we suggest governments strengthen scientific integrity policies, include scientists’ right to speak freely in collective‐bargaining agreements, guarantee public access to scientific information, and strengthen agency culture supporting scientific integrity. To ensure the transparency and integrity with which information from nongovernmental scientists (e.g., submitted comments or formal policy reviews) informs the policy process, we suggest governments broaden the scope of independent reviews, ensure greater diversity of expert input and transparency regarding conflicts of interest, require a substantive response to input from agencies, and engage proactively with scientific societies. For their part, scientists and scientific societies have a responsibility to engage with the public to affirm that science is a crucial resource for developing evidence‐based policy and regulations in the public interest.     

Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management

River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.     

A game theoretic approach to multimodal communication

Over the last few decades the animal communication community has become increasingly aware that much communication occurs using multiple signals in multiple modalities. The majority of this work has been empirical, with less theoretical work on the advantages conferred by such communication. In the present paper, we ask: Why should animals communicate with multiple signals in multiple modalities? To tackle this question we use game theoretic techniques, and highlight developments in the economic signaling literature that might offer insight into biological problems. We start by establishing a signaling game, and investigate signal honesty under two prevailing paradigms of honest communication – costly signaling and cheap talk. In both paradigms, without further constraint, it is simple to show that anything that can be achieved with multiple signals can be achieved with one. We go on to investigate different sets of possible constraints that may make multiple signals and multimodal signals in particular more likely to evolve. We suggest that constraints on cost functions and bandwidths, orthogonal noise across modalities, strategically distinct modes, multiple qualities, multiple signalers, and multiple audiences, all provide biologically plausible scenarios that theoretically favor multiple and multimodal signaling.     

A New Approach of BioCO2 Fixation by Thermoplastic Processing of Microalgae

Effective sequestration of carbon dioxide (CO₂) by algae reduces greenhouse gases effect on global warming. Algae biomass or residual such as biomeal from algae biofuel processing can be judiciously used for industrial applications such as fertilizer, animal feed, and plastics. Conversion of algae into useful plastic materials can be accomplished by extrusion technology. During algal plastic manufacturing, up to 20% thermoplastic algal blends can be fixated into or encapsulated by a non-biodegradable polymer such as polyolefin, which is known to be resistant to abiotic or biotic degradation. As a result, CO₂ that is captured by algae through photosynthesis is permanently stored in a form of biomass and will not be released back into the atmosphere. The extrusion of microalgae reported in this article is a novel process to sequester CO₂ and at the same time it makes a good use of the algae biomass in plastic manufacturing. Mechanical properties of the thin plastic films containing microalgae are comparable to the neat polyurethane or polyethylene films. Injection molded articles containing microalgae are dimensionally stable. However, a lower tensile strength, especially elongation at break, is observed in comparison to the neat polypropylene.