Effectiveness of three configurations of membrane bioreactors on the removal of priority and emergent organic compounds from wastewater: comparison with conventional wastewater treatments

In this work the effectiveness of membrane bioreactors as advanced treatment on the removal of emergent and priority organic compounds in wastewater treatment plants has been evaluated during a one-year monitoring study. The studied wastewater treatment plant operates with flat sheet and hollow fibre membranes in two parallel lines. Moreover, a reverse osmosis module connected in series after the hollow fibre membrane was evaluated for one month. Comparison of membrane bioreactor and conventional activated sludge treatment was also investigated, as well as the influence of the physicochemical properties of the compounds on the removal rates achieved. Sixteen pharmaceutical compounds belonging to seven therapeutic groups and eight priority organic pollutants, including linear alkylbenzene sulfonates, nonylphenol and its ethoxylates and phthalate, were monitored. The highest mean concentrations corresponded to priority organic pollutants (309 μg L(-1) of linear alkylbenzene sulfonate C(12)) followed by pharmaceutical compounds (24.5 μg L(-1) of ibuprofen). No significant difference of effectiveness was found among flat sheet and hollow fibre membranes. However, an improvement was obtained with the addition of a reverse osmosis module for most of the compounds. Biodegradation has been shown as the main route involved in the removal of organic compounds during both technologies.     

Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min^?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76–128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m^?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.     

Methods of characterizing the distribution of exhaust emissions from light-duty, gasoline-powered motor vehicles in the U.S. fleet

Mobile sources significantly contribute to ambient concentrations of airborne particulate matter (PM). Source apportionment studies for PM10 (PM < or = 10 microm in aerodynamic diameter) and PM2.5 (PM < or = 2.5 microm in aerodynamic diameter) indicate that mobile sources can be responsible for over half of the ambient PM measured in an urban area. Recent source apportionment studies attempted to differentiate between contributions from gasoline and diesel motor vehicle combustion. Several source apportionment studies conducted in the United States suggested that gasoline combustion from mobile sources contributed more to ambient PM than diesel combustion. However, existing emission inventories for the United States indicated that diesels contribute more than gasoline vehicles to ambient PM concentrations. A comprehensive testing program was initiated in the Kansas City metropolitan area to measure PM emissions in the light-duty, gasoline-powered, on-road mobile source fleet to provide data for PM inventory and emissions modeling. The vehicle recruitment design produced a sample that could represent the regional fleet, and by extension, the national fleet. All vehicles were recruited from a stratified sample on the basis of vehicle class (car, truck) and model-year group. The pool of available vehicles was drawn primarily from a sample of vehicle owners designed to represent the selected demographic and geographic characteristics of the Kansas City population. Emissions testing utilized a portable, light-duty chassis dynamometer with vehicles tested using the LA-92 driving cycle, on-board emissions measurement systems, and remote sensing devices. Particulate mass emissions were the focus of the study, with continuous and integrated samples collected. In addition, sample analyses included criteria gases (carbon monoxide, carbon dioxide, nitric oxide/nitrogen dioxide, hydrocarbons), air toxics (speciated volatile organic compounds), and PM constituents (elemental/organic carbon, metals, semi-volatile organic compounds). Results indicated that PM emissions from the in-use fleet varied by up to 3 orders of magnitude, with emissions generally increasing for older model-year vehicles. The study also identified a strong influence of ambient temperature on vehicle PM mass emissions, with rates increasing with decreasing temperatures.     

Increase of 210Po levels in human semen fluid after mussel ingestion

Polonium-210 (²¹⁰Po) radioactive concentrations were determined in human semen fluid of vasectomized non-smoker volunteers. The ²¹⁰Po levels ranged from 0.10 to 0.39 mBq g⁻¹ (mean: 0.23 ± 0.08 mBq g⁻¹). This value decreased to 0.10 ± 0.02 mBq g⁻¹ (range from 0.07 to 0.13 mBq g⁻¹) after two weeks of a controlled diet, excluding fish and seafood. Then, volunteers ate during a single meal 200 g of the cooked mussel Perna perna L., and ²¹⁰Po levels were determined again, during ten days, in semen fluid samples collected every morning. Volunteers continued with the controlled diet and maintained sexual abstinence through the period of the experiment. A 300% increase of ²¹⁰Po level was observed the day following mussel consumption, with a later reduction, such that the level returned to near baseline by day 4.     

Water quality in Minho/Miño River (Portugal/Spain)

Minho River, also called Miño (in Spain), extends to about 300 km from Spain to Portugal. The source of the river lies in Spain and in the last 75 km, the river defines the border between Portugal and Spain. Under the scope of a cooperation project between North Portugal and Galicia region of Spain, titled: “Valorization of the natural resources of the Minho/Miño drainage basin”, seven water-sampling campaigns were carried out during the last 2 years in Minho River basin. Seven sampling sites were selected along the international stretch, and five were chosen in the main Portuguese and Spanish tributaries of Minho River. Water quality based on the physicochemical and microbial parameters was assessed. According to the Portuguese legislation for surface waters, the international section of Minho River presents a reasonably good water quality (BOD₅ <5 mg/L, TNK <2 mg/L, and total phosphorous <1 mg P/L). Valença and Louro were found to be the most polluted sampling sites and Louro the most polluted tributary (maximum values observed: TSS?=?26 mg/L, BOD₅?=?6.6 mg O₂/L, COD?=?20.8 mg O₂/L, total nitrogen?=?9.9 mg N/L; minimum value observed: OD?=?1.3 mg O₂/L). A one-dimensional stream water quality model QUAL2Kw was calibrated using data measured in field surveys along the international stretch of Minho River. QUAL2Kw was also used to predict the impact of flow conditions, discharges, and tributaries on the water quality of international stretch of Minho River, essential to establish proposals for management and planning of Minho River Basin.     

Morphological,compositional and ultrastructural changes in the Scrobicularia plana shell in response to environmental mercury – An indelible fingerprint of metal exposure?

The study aimed to assess morphological, structural and compositional alterations in Scrobicularia plana nacre environmentally exposed to mercury in order to seek out the possibility of the assessed alterations as a monitoring tool to handle complexity and interactions of metals in the environment involving a non-invasive methodology. Bivalves were collected from a mercury contaminated site (Laranjo basin – Ria de Aveiro, Portugal) and a reference site in the same aquatic system. The combination of scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) technique depicted a sheet like morphology of bivalve nacre collected from the reference site. Moreover, EDS plot exhibited the presence of potassium, oxygen, calcium, and carbon elements. Shells collected from the contaminated area depicted lamellar patches like structures with particle like morphology composition. SEM images corresponding to the elemental analysis by EDS plot clearly denoted the presence of mercury. SEM images from the other locations of the contaminated shells depicted large surface area, a broken or ruptured symmetry of organic matrix as well as crack-like gaps. The influence of environmental mercury affecting the surface morphology of S. plana nacre showed dimple like morphology (as proved by transmission electron microscopy, TEM). The possible explanation may be the replacement of calcium elements with other elements or alloys from the nacre composite collected from contaminated region. Therefore, the nacre fingerprint may be useful as innovative knowledge and applicable tool aiming at risk reduction from noxious mercury present in the environment. Overall results suggested the use of shell as an indelible fingerprint of metal exposure.     

Analytical methods and validation for determining trace elements in red wines

The objective of this work is to quantify As, Hg, Cd, Ni and Pb in Portuguese red wines. First, the methods for the quantification of trace elements in red wines were validated. Several pre-treatments were compared, namely a pre-digestion process with HNO₃, a pre-oxidation step with H₂O₂, and a spiking step of wine samples with a known concentration of the trace elements analyzed. Except for As, it was determined that the quantification of the trace elements does not require a pre-digestion process with HNO₃. For all of the trace elements analyzed, a pre-oxidation step with H₂O₂ may enable an accurate quantification. The techniques chosen for the quantification of trace elements were hydride generation atomic absorption spectrometry (HGAAS) for As and Hg, electrothermal atomic absorption spectrometry (ETAAS) for Cd, and flame atomic absorption spectrometry (FAAS) for Ni and Pb. In the second stage of this work, 25 Portuguese red wines spanning all of the red wine-producing regions were analyzed for all of the five trace elements referred to above. Only Cd and Pb have shown concentrations above the limit values defined by the “Organization Internationale de la Vigne et du Vin.” The Target Hazard Quotient (THQ) equation was used to determine in which wine-producing regions that wine consumption can be a problem for public health in terms of the concentrations of the five trace elements analyzed. THQ values have indicated that for the universe of the 25 red wines analyzed no region produces wines that can pose problems for public health, when the Portuguese red wine standard consumption is considered.     

Symptoms prevalence among office workers of a sealed versus a non-sealed building: Associations to indoor air quality

ObjectivesAn increasing number of complaints related to time spent in artificially ventilated buildings have been progressively reported and attributed, at least in part, to physical and chemical exposures in the office environment. The objective of this research was to investigate the association between the prevalence of work-related symptoms and the indoor air quality, comparing a sealed office building with a naturally ventilated one, considering, specially, the indoor concentration of TPM, TVOCs and the main individual VOCs.MethodsA cross-sectional study was performed to compare the prevalence of sick building syndrome (SBS) symptoms among 1736 office workers of a sealed office building and 950 of a non-sealed one, both in Rio de Janeiro's downtown. The prevalence of symptoms was obtained by a SBS standardized questionnaire. The IAQ of the buildings was evaluated through specific methods, to determine the temperature, humidity, particulate matter and volatile organic compound (VOC) concentrations.ResultsUpper airways and ophthalmic symptoms, tiredness and headache were highly prevalent in both buildings. Some symptoms were more prevalent in the sealed building: “eye dryness” 33.3% and 27.1% (p: 0.01); “runny nose” 37.3% and 31.3% (p: 0.03); “dry throat” 42% and 36% (p: 0.02); and “lethargy” 58.5% and 50.5% (p: 0.03) respectively. However, relative humidity and indoor total particulate matter (TPM) concentration as well as total volatile organic compounds (TVOCs) were paradoxically greater in the non-sealed building, in which aromatic compounds had higher concentration, especially benzene. The analysis between measured exposure levels and resulting symptoms showed no association among its prevalence and TPM, TVOCs, benzene or toluene concentration in none of the buildings.ConclusionsOther disregarded factors, like undetected VOCs, mites, molds and endotoxin concentrations, may be associated to the greater prevalence of symptoms in the sealed building.     

Fluorescence and DOC contents of estuarine pore waters from colonized and non-colonized sediments: effects of sampling preservation

The influence of the colonization of salt marsh sediments with Halimione portulacoides was evaluated by analysing the fluorescent dissolved organic matter (FDOM) in sediment pore waters from a salt marsh at different depths. Cores of sediments at colonized and non-colonized sites were collected from a coastal lagoon (Ria de Aveiro, Portugal). The DOC content of extracted pore waters was determined and characterized by synchronous molecular fluorescence (Deltalambda=60nm) and UV-visible spectroscopies. The common practice of freezing sediment cores for further and later chemical investigation was shown not to be an appropriate methodology of sample preservation. On the contrary, freezing of extracted and filtered pore water seemed not to affect either the DOC content or the fluorescence properties of pore waters. Two types of fluorescent substances were found in the pore waters spectra; one corresponding to humic-like substances and another one resembling proteins. However, major differences were found in the spectra of pore waters depending on both depth and the presence/absence of vegetation colonization.