Oxygen tolerance capacity of upflow anaerobic solid-state (UASS) with anaerobic filter (AF) system

In order to investigate the oxygen tolerance capacity of upflow anaerobic solid-state(UASS)with anaerobic filter(AF) system, the effect of microaeration on thermophilic anaerobic digestion of maize straw was investigated under batch conditions and in the UASS with AF system. Aeration intensities of 0–431 m L O2/gvswere conducted as pretreatment under batch conditions. Aeration pretreatment obviously enhanced anaerobic digestion and an aeration intensity of 431 m L O2/gvsincreased the methane yield by 82.2%. Aeration intensities of 0–355 m L O2/gvswere conducted in the process liquor circulation of the UASS with AF system. Dissolved oxygen(DO) of UASS and AF reactors kept around 1.39 ±0.27 and 0.99 ± 0.38 mg/L, respectively. p H was relatively stable around 7.11 ± 0.04. Volatile fatty acids and soluble chemical oxygen demand concentration in UASS reactor were higher than those in AF reactor. Methane yield of the whole system was almost stable at 85 ± 7 m L/gvs as aeration intensity increased step by step. The UASS with AF system showed good oxygen tolerance capacity.     

Sources of anthropogenic platinum-group elements (PGE): Automotive catalysts versus pge-processing industries

Soil samples from the area of Hanau (Hessen, Germany) were analyzed for anthropogenic platinum-group elements (PGE). The results confirm the existence of two different sources for anthropogenic PGE: 1. automotive catalysts, and 2. PGE-processing plants. Both sources emit qualitatively and quantitatively different PGE spectra and PGE interelemental ratios (especially the Pt/Rh ratio). Elevated PGE values which are due to automotive catalysts are restricted to a narrow-range along roadside soil, whereas those due to PGE-processing plants display a large-area dispersion. The emitted PGE-containing particles in the case of automotive catalysts are subject to transport by wind and water, whereas those from PGE-processing plants are preferably transported by wind. This points to a different aerodynamic particle size. Pt, Pd, and Rh concentrations along motorways are dependent on the amount of traffic and the driving characteristics.     

Polycyclic aromatic hydrocarbons in pine and spruce shoots-temporal trends and spatial distribution

In the framework of the German environmental specimen bank one-year old spruce shoots (Picea abies) and pine shoots (Pinus sylvestris) serve as bioindicators for the atmospheric pollution. Sampling is performed in two urbanized areas in western and eastern Germany (Warndt and Duebener Heide, respectively), and in seven different rural locations. Prior to archiving conifer shoots are continuously analyzed for a set of 17 individual polycyclic aromatic hydrocarbons (PAHs). The results from the two urbanized areas show that the atmospheric contamination with PAH has declined by about 75% between 1985 and 2004 at Warndt and by about 85% between 1991 and 2004 at Duebener Heide. However, summation operatorPAH concentrations stayed virtually constant at both locations since the end of the 1990s at levels of about 100 ng g(-1) wet weight (ww). In spruce shoots from rural areas current concentrations of PAHs are significantly lower and vary between 8 and 61 ng g(-1) ww. In all shoot samples the four low molecular aromatics phenanthrene, fluoranthene, pyrene, and chrysene dominate the pattern by contributing 60 to 90% to summation operatorPAH. The group of high molecular weight aromatics is dominated by benzo[b,j,k]fluoranthene, especially in spruce shoots originating from greater altitudes remarkable amounts of six and seven ringed PAHs could be detected. Despite the strong decrease of PAH concentrations in urban areas patterns of aromatics remained nearly unchanged in the observation period 1985 to 2004.     

LES validation of urban flow,part I: flow statistics and frequency distributions

Essential prerequisites for a thorough model evaluation are the availability of problem-specific, quality-controlled reference data and the use of model-specific comparison methods. The work presented here is motivated by the striking lack of proportion between the increasing use of large-eddy simulation (LES) as a standard technique in micro-meteorology and wind engineering and the level of scrutiny that is commonly applied to assess the quality of results obtained. We propose and apply an in-depth, multi-level validation concept that is specifically targeted at the time-dependency of mechanically induced shear-layer turbulence. Near-surface isothermal turbulent flow in a densely built-up city serves as the test scenario for the approach. High-resolution LES data are evaluated based on a comprehensive database of boundary-layer wind-tunnel measurements. From an exploratory data analysis of mean flow and turbulence statistics, a high level of agreement between simulation and experiment is apparent. Inspecting frequency distributions of the underlying instantaneous data proves to be necessary for a more rigorous assessment of the overall prediction quality. From velocity histograms local accuracy limitations due to a comparatively coarse building representation as well as particular strengths of the model to capture complex urban flow features with sufficient accuracy are readily determined. However, the analysis shows that further crucial information about the physical validity of the LES needs to be obtained through the comparison of eddy statistics, which is focused on in part II. Compared with methods that rely on single figures of merit, the multi-level validation strategy presented here supports conclusions about the simulation quality and the model’s fitness for its intended range of application through a deeper understanding of the unsteady structure of the flow.     

Yttrium recovery from primary and secondary sources: A review of main hydrometallurgical processes

Yttrium is important rare earths (REs) used in numerous fields, mainly in the phosphor powders for low-energy lighting. The uses of these elements, especially for high-tech products are increased in recent years and combined with the scarcity of the resources and the environmental impact of the technologies to extract them from ores make the recycling waste, that contain Y and other RE, a priority.The present review summarized the main hydrometallurgical technologies to extract Y from ores, contaminated solutions, WEEE and generic wastes. Before to discuss the works about the treatment of wastes, the processes to retrieval Y from ores are discussed, since the processes are similar and derived from those already developed for the extraction from primary sources.Particular attention was given to the recovery of Y from WEEE because the recycle of them is important not only for economical point of view, considering its value, but also for environmental impact that this could be generated if not properly disposal.     

Europe-wide survey of estrogenicity in wastewater treatment plant effluents: the need for the effect-based monitoring

A pan-European monitoring campaign of the wastewater treatment plant (WWTP) effluents was conducted to obtain a concise picture on a broad range of pollutants including estrogenic compounds. Snapshot samples from 75 WWTP effluents were collected and analysed for concentrations of 150 polar organic and 20 inorganic compounds as well as estrogenicity using the MVLN reporter gene assay. The effect-based assessment determined estrogenicity in 27 of 75 samples tested with the concentrations ranging from 0.53 to 17.9 ng/L of 17-beta-estradiol equivalents (EEQ). Approximately one third of municipal WWTP effluents contained EEQ greater than 0.5 ng/L EEQ, which confirmed the importance of cities as the major contamination source. Beside municipal WWTPs, some treated industrial wastewaters also exhibited detectable EEQ, indicating the importance to investigate phytoestrogens released from plant processing factories. No steroid estrogens were detected in any of the samples by instrumental methods above their limits of quantification of 10 ng/L, and none of the other analysed classes of chemicals showed correlation with detected EEQs. The study demonstrates the need of effect-based monitoring to assess certain classes of contaminants such as estrogens, which are known to occur at low concentrations being of serious toxicological concern for aquatic biota.     

How to consider engineered nanomaterials in major accident regulations?

Major accident regulations aim at protecting the population and the environment from possible accidental releases of chemicals. To achieve this goal, the regulations need to be reassessed in light of the development of new technologies. A currently rapidly growing new technology is nanotechnology, and engineered nanomaterials (ENM) are already produced and used in commercial products. The aim of this work was therefore to evaluate the current knowledge on human and ecotoxicology of ENM and their release and behavior in the environment in the context of major accident prevention. Nano-specific release paths are not to be expected. The established safety standards in the chemical industry are also applicable to ENM, especially the separate storage of flammable solvents and detention reservoirs. The potential of a release to the environment of ENM in powder form is larger than for suspensions; however, it can be minimized by safety measures established for conventional dusts. The considered human toxicology studies show that to date not conclusive enough answers regarding the toxicity of ENM can be made. The effects are dependent not only on the material itself but more on the functionalization, surface reactivity, size, and form. The acute ecotoxicity of ENM seems to be similar to the one of the corresponding microparticles (TiO₂) or the respective dissolved ions (Ag, Zn) with the exception of photocatalytically active nano-TiO₂, which has an increased toxicity. In order to guarantee that all ENM are included in the existing major accident regulations, different classification options are possible and the advantages and disadvantages are discussed. An important step will be the compulsory inclusion of nano-specific data in the Material Safety Data Sheets that serve as the basic medium to transfer information from the manufacturer to downstream users and authorities. We also call for a regular monitoring of the production and uses for ‘high production volume ENM’ that could have the largest implications for major accident regulations.     

Recovery of yttrium from fluorescent powder of cathode ray tube,CRT: Zn removal by sulphide precipitation

This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2² full factorial plan and the highest extraction yields for yttrium and zinc equal to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H₂O₂ concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction.Two series of precipitation tests for zinc are carried out: a 2² full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na₂S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%.Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.