Physiological responses of beet and cabbage plants exposed to copper and their potential insertion in human food chain

Environmental Science and Pollution Research - Copper (Cu) can be toxic to vegetables when it is absorbed and accumulated at large concentrations, a fact that increases the risk of excessive...     

Tissue distribution of polychlorinated naphthalenes (PCNs) and non-ortho chlorinated biphenyls (non-ortho CBs) in harbour porpoises (Phocoena phocoena) from Swedish waters

Polychlorinated naphthalenes (PCNs) and non-ortho chlorinated biphenyls (non-ortho CBs) were analysed in blubber, nuchal fat, liver, muscle, kidney and brain of three male harbour porpoises (Phocoena phocoena) from the west coast of Sweden. To estimate spatial variation, PCNs and non-ortho CBs were analysed in six blubber samples collected at different anatomical sites of each animal. Highest wet weight concentrations of ΣPCNs were detected in the lipid rich tissues (blubber and nuchal fat) and liver (520–730 and 520 pg/g, respectively) and lowest in brain (22 pg/g). TetraCNs were most abundant in muscle, kidney and brain, while the hexaCNs were most abundant in the lipid rich tissues and liver. The highest lipid weight concentration recorded (11 ng/g) was for the hexaCN congeners no. 66/67 in liver. These coeluting hexaCN congeners accounted for 80–100% of total hexaCNs in all tissues examined.Concentrations of Σnon-ortho CBs were highest in lipid rich tissues (220–280 pg/g wet weight). Non-ortho CB no. 77 and 169 constituted between 62–86% and 4.9–9.3%, respectively, of total Σnon-ortho CBs. No major variation of Σnon-ortho CB concentrations was found between the six different blubber sites but higher ΣPCN concentrations (wet weight) were found dorsally at the peduncle. Toxic equivalent concentrations (TEQs) showed that non-ortho CB no. 126 was the main contributor to total TEQs in all tissues, except liver in which hexaCN congener nos. 66/67 contributed to about 50% of total TEQs.     

Effects of acidic attack on chemical,mineralogical, and morphological properties of geomaterials

Environmental Science and Pollution Research - Exposure of geomaterials to acidic leachates may compromise their structure and functionality due to changes in physicochemical, mineralogical, and...     

Adaptive capacity determinants in developed states: examples from the Nordic countries and Russia

Adaptive capacity in a community context has so far mainly been studied in developing countries as well as indigenous communities in the industrialised world. This article adds to that literature through reviewing studies undertaken in the Nordic countries and Russia, highlighting the ways in which general determinants of adaptive capacity play out in Northern, industrialised contexts. The paper illustrates that the determinants of adaptive capacity in industrialised states exhibit systematic differences from mixed subsistence-cash based communities such as those found in Arctic Canada. We discuss in particular the importance of economic resources in a market-based system, technological competition, and infrastructure, in determining adaptive capacity of natural resource-dependent communities in the Nordic countries and Russia. The paper also illustrates differences in adaptive capacity within the case study region, including between peripheral and central locations with regard to economic resources and diversification possibilities, and between Nordic and Russian cases with regard to infrastructure and technology access. The findings indicate that understanding of determinants of adaptive capacity in resource-dependent communities would benefit from both further contextualisation and broad comparison, across different types of political and administrative systems.     

Effectiveness of short-term knowledge communication on Baltic Sea marine genetic biodiversity to public managers

The aim of this study is to assess the impact of two forms of short-term knowledge communication—lectures and group deliberations—on public managers’ policy beliefs regarding genetic biodiversity in the Baltic Sea. Genetic biodiversity is a key component of biological variation, but despite scientific knowledge and far-reaching political goals, genetic biodiversity remains neglected in marine management. Previous research highlights lack of knowledge among managers as one explanation to the implementation deficit. This multidisciplinary study builds on the identified need for an improved knowledge transfer between science and ongoing management. A basic knowledge package on genetic biodiversity in the Baltic Sea was presented as either a lecture or a deliberative group discussion to two separate samples of public managers who are involved in Baltic Sea and other biodiversity management at the regional level in Sweden. The empirical findings show that the communicated information has an impact on the public managers’ beliefs on genetic biodiversity of the Baltic Sea. Lectures seem more efficient to transfer knowledge on this theme. Those who received information through a lecture strengthen their confidence in area protection as a management tool to conserve genetic diversity. They were also more convinced of the obligation of authorities at national and regional level to take on larger responsibility for genetic conservation than those managers who participated in a deliberative discussion.

     

Reducing the risk of invasive forest pests and pathogens: Combining legislation,targeted management and public awareness

Intensifying global trade will result in increased numbers of plant pest and pathogen species inadvertently being transported along with cargo. This paper examines current mechanisms for prevention and management of potential introductions of forest insect pests and pathogens in the European Union (EU). Current European legislation has not been found sufficient in preventing invasion, establishment and spread of pest and pathogen species within the EU. Costs associated with future invasions are difficult to estimate but past invasions have led to negative economic impacts in the invaded country. The challenge is combining free trade and free movement of products (within the EU) with protection against invasive pests and pathogens. Public awareness may mobilise the public for prevention and detection of potential invasions and, simultaneously, increase support for eradication and control measures. We recommend focus on commodities in addition to pathways, an approach within the EU using a centralised response unit and, critically, to engage the general public in the battle against establishment and spread of these harmful pests and pathogens.     

Long-term geochemical evolution of the near field repository: insights from reactive transport modelling and experimental evidences

The KBS-3 underground nuclear waste repository concept designed by the Swedish Nuclear Fuel and Waste Management Co. (SKB) includes a bentonite buffer barrier surrounding the copper canisters and the iron insert where spent nuclear fuel will be placed. Bentonite is also part of the backfill material used to seal the access and deposition tunnels of the repository. The bentonite barrier has three main safety functions: to ensure the physical stability of the canister, to retard the intrusion of groundwater to the canisters, and in case of canister failure, to retard the migration of radionuclides to the geosphere. Laboratory experiments (< 10 years long) have provided evidence of the control exerted by accessory minerals and clay surfaces on the pore water chemistry. The evolution of the pore water chemistry will be a primordial factor on the long-term stability of the bentonite barrier, which is a key issue in the safety assessments of the KBS-3 concept.In this work we aim to study the long-term geochemical evolution of bentonite and its pore water in the evolving geochemical environment due to climate change. In order to do this, reactive transport simulations are used to predict the interaction between groundwater and bentonite which is simulated following two different pathways: (1) groundwater flow through the backfill in the deposition tunnels, eventually reaching the top of the deposition hole, and (2) direct connection between groundwater and bentonite rings through fractures in the granite crosscutting the deposition hole. The influence of changes in climate has been tested using three different waters interacting with the bentonite: present-day groundwater, water derived from ice melting, and deep-seated brine. Two commercial bentonites have been considered as buffer material, MX-80 and Deponit CA-N, and one natural clay (Friedland type) for the backfill. They show differences in the composition of the exchangeable cations and in the accessory mineral content. Results from the simulations indicate that pore water chemistry is controlled by the equilibrium with the accessory minerals, especially carbonates. pH is buffered by precipitation/dissolution of calcite and dolomite, when present. The equilibrium of these minerals is deeply influenced by gypsum dissolution and cation exchange reactions in the smectite interlayer. If carbonate minerals are initially absent in bentonite, pH is then controlled by surface acidity reactions in the hydroxyl groups at the edge sites of the clay fraction, although its buffering capacity is not as strong as the equilibrium with carbonate minerals. The redox capacity of the bentonite pore water system is mainly controlled by Fe(II)-bearing minerals (pyrite and siderite). Changes in the groundwater composition lead to variations in the cation exchange occupancy, and dissolution–precipitation of carbonate minerals and gypsum. The most significant changes in the evolution of the system are predicted when ice-melting water, which is highly diluted and alkaline, enters into the system. In this case, the dissolution of carbonate minerals is enhanced, increasing pH in the bentonite pore water. Moreover, a rapid change in the population of exchange sites in the smectite is expected due to the replacement of Na for Ca.     

Material Flows in Sweden 2004

This paper presents and discusses the method and results of account for material flows in Sweden for the year 2004. The results show that it is possible to compile material flow data from existing sources in the Swedish statistical system. By using the European classification system of goods, the Combined Nomenclature, as the basic unit of the data collection, both data collection and aggregation into material flow categories were made possible. Although these data exist in the statistical system, they are not easily available for the scientific community. This is due to several reasons, such as the aggregation of data in the system of statistics not corresponding to the material flow account structure and the fact that data on import and export of materials are organised differently than data for domestic extraction. Almost 50% of the material flows in Sweden are flows of minerals, mainly construction minerals followed by iron ores. Most of the extracted iron ores are exported. In comparison with other European countries this generates a unique situation with Sweden as the only net exporter of iron ores. The flow of biomass in terms of wood is also considerable (26% of the Swedish material flows in 2004). The domestic material consumption (inflow) per capita in 2004 was 8 tonnes minerals, 6 tonnes biomass and almost 3 tonnes of fossil fuels. Of the material flows of fossil fuels petroleum and natural gas dominates with 90%.     

Flexible and robust strategies for waste management in Sweden

Treatment of solid waste continues to be on the political agenda. Waste disposal issues are often viewed from an environmental perspective, but economic and social aspects also need to be considered when deciding on waste strategies and policy instruments. The aim of this paper is to suggest flexible and robust strategies for waste management in Sweden, and to discuss different policy instruments. Emphasis is on environmental aspects, but social and economic aspects are also considered. The results show that most waste treatment methods have a role to play in a robust and flexible integrated waste management system, and that the waste hierarchy is valid as a rule of thumb from an environmental perspective. A review of social aspects shows that there is a general willingness among people to source separate wastes. A package of policy instruments can include landfill tax, an incineration tax which is differentiated with respect to the content of fossil fuels and a weight based incineration tax, as well as support to the use of biogas and recycled materials.     

Dioxin removal in “energy from waste plants” - comparison of air pollution control methods

The graph below shows the emitted dioxin - equivalents (Eadon) in grams per year in flue gas from municipal solid waste incinerators with various air pollution control methods for plants of capacity of 200 000 ton municipal solid waste (MSW) per year.

Full-size image (15K)

With optimized combustion and an effective air pollution control system the emissions of dioxins can be kept very low (concentrations below 0.1 ng/m³n).

With a very effective air pollution control system the total emission from all Swedish MSW-incinerators burning approximately 1.5 Mton/year will by 1990 be below 2 g/year - a drastic reduction from approximately 15 g today. As the total dioxin - equivalent emission to the environment in Sweden in the year 1987 was almost 500 g we see that municipal waste incineration really is on the way to solve their dioxin problem.