The evaluation of stability during the composting of different starting materials: comparison of chemical and biological parameters

Three blends formed by: (i) food processing waste (CP(FP)), (ii) waste water sewage sludge (CP(WW)), and (iii) their mixture (CP(FP+WW)), blended with tree pruning as bulking agent, were composted over 3 months. During composting the blends were monitored for the main physical-chemical characteristics: temperature, oxygen saturation level (O(2)%), pH, total and volatile solids, total organic carbon, and organic nitrogen (N(org)). In addition to the main parameters, the dissolved organic carbon (DOC), the inorganic nitrogen and the Oxygen Uptake Rate (OUR) were monitored. All the mixtures easily reached a peak temperature around 70°C, related to the lowest O(2)%. After 90 d, CP(FP), CP(FP+WW), and CP(WW) showed an organic matter mineralization of 43%, 35% and 33%, respectively; CP(FP) fitted an exponential model while both CP(FP+WW), and CP(WW) fitted a logistic model. During composting an OUR reduction of 79%, 78% and 73% was registered in CP(FP), CP(FP+WW), and CP(WW), respectively; the OUR successfully fitted the adopted exponential model and well reflected the stabilization process in time. The N(org) recovery at the end of the process was positive only in CP(WW) (11.6%). The DOC significantly decreased during the composting process but did not successfully fit any model. The mineral nitrogen did not follow the typical pattern with NH(4)(+) disappearance and NO(3)(-) accumulation. Strong NO(3)(-) losses were evident in all blends, while NH(4)(+) accumulations were detectable only in CP(FP), and CP(FP+WW). The NH(4)(+)/NO(3)(-) ratio did not satisfactorily reflect the composting process over time. The comparison of the first order (exponential) and logistic (sigmoidal) models applied to the OUR and OM course highlights the role of mineral nitrogen as limiting factor during composting of the more stabilized sludge.     

Dimensions and models of contemporary public space management in England

This article discusses the concept of public space management and its evolution in a context of wider changes to urban governance. Public space management is taken as a sphere of urban governance in which conflicting societal demands on, and aspirations for, public space are interpreted through a set of processes and practices. Four interlinked dimensions for public space management are proposed: the co-ordination of interventions; the regulation of uses and conflicts between uses; the definition and deployment of maintenance routines; and investment in public spaces and their services. Within this conceptual framework, the paper looks at recent changes in public space management in England to suggest the emergence of alternative models of management. These are based on the roles ascribed to the state, to private agents and to user organisations, and on different approaches to dealing with the four management dimensions. Although the discussion shows that these models are more than just abstract formulations, and have been used to deal with a variety of public space problems, an important purpose for the paper is to provide an analytical framework through which to examine emergent practices in the management of public space and their potential consequences.     

PM10 Chemical Model Simulations Over Northern Italy in the Framework of the CityDelta Exercise

Within the framework of CityDelta open model inter-comparison exercise, two different atmospheric chemical transport models, comprehensive air quality model with extension and transport chemical aerosol model, have been applied over a domain centred on Milan (North of Italy) as a result of a cooperation of five Italian groups. The two models have shared the same input fields for yearly PM10 simulations. The paper illustrates the analysis of the particulate matter-simulated concentrations and the comparison with the available experimental data.     

Evaluating Tourist Perception of Environmental Changes as a Contribution to Managing Natural Resources in Glacierized Areas: A Case Study of the Forni Glacier (Stelvio National Park, Italian Alps)

Climate change effects are noticeably evident above the timberline where glacier and permafrost processes and mass movements drive the surface evolution. In particular, the cryosphere shrinkage is deeply changing the features and characteristics of several glacierized mountain areas of the world, and these modifications can also affect the landscape perception of tourists and mountaineers. On the one hand glacier retreat is increasing the interest of tourists and visitors in areas witnessing clear climate change impacts; on the other hand cryosphere shrinkage can impact the touristic appeal of mountain territories which, diminishing their ice and snow coverage, are also losing part of their aesthetic value. Then, to promote glacierized areas in a changing climate and to prepare exhaustive and actual proposals for sustainable tourism, it is important to deepen our knowledge about landscape perception of tourists and mountaineers and their awareness of the ongoing environmental modifications. Here we present the results from a pilot study we performed in summer 2009 on a representative glacierized area of the Alps, the Forni Valley (Stelvio National Park, Lombardy, Italy), a valley shaped by Forni, the largest Italian valley glacier. During the 2009 summer season we asked tourists visiting the Forni Valley to complete a questionnaire. This study was aimed at both describing the features and characteristics of tourists and mountaineers visiting this Alpine zone in summer and evaluating their landscape perception and their ability to recognize climate change impacts and evidence. Our results suggest that the dissemination strategies in a natural protected area have to take into account not only the main landscape features but also the sites where the information will be given. In particular considering the peculiarities of the huts located in the area, such as their different accessibility and the fact that they are included or not in a mountaineering network like that of the Italian Alpine Club. Both these factors can influence the kind of visitors to the area, thus requiring different dissemination strategies. Moreover, differences in the viewpoints from where visitors could watch and understand landscape also have to be considered. Next, in a protected area where climate change effects are evident, the dissemination strategies should be developed in close cooperation with scientists who are analyzing the area and with the support of periodic interviews which could be very useful to evaluate the effectiveness of the applied dissemination methods. Last but not least, the questionnaire should be standardized and distributed in several protected areas, thus permitting useful comparisons and the identification of common solutions for sharing in a friendly way scientific knowledge about climate change and its effects on the environment and the landscape.     

Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel

This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.     

Faster phototransformation of the formate (terrestrial) versus methanesulphonate (marine) markers of airborne particles: implications for modelling climate change

Atmospheric particulate matter is altering climate. For instance marine biogenic particles are cooling climate. Organic markers are major tools to elucidate the sources of atmospheric particulate matter. Formate is commonly used as a marker of continental aerosols, whereas methanesulphonate is used as tracer of biogenic marine aerosols. However, transformation processes during aerosol transport may modify their relative concentrations and, in turn, introduce a bias in the assessment of particle sources. Actually very little is known about the transformation of formate and methanesulphonate in aerosols. Therefore, we irradiated formate and methanesulphonate in the presence of nitrate and haematite. Nitrate and haematite are aerosol photosensitisers, producing reactive species that degrade organic compounds. The time evolution of formate and methanesulphonate was monitored by ion chromatography. Our results show that formate is transformed from 1.6 to 4.1 times faster than methanesulphonate. This trend is partly due to higher reactivity with the hydroxyl radical and partly due to additional reaction with other transients such as nitrogen dioxide. Such results strongly suggest faster formate transformation during particle transport. Therefore, when formate and methanesulphonate are used as particle tracers, an overestimation of marine biogenic versus continental particle sources is expected. This bias has major implications for climate prediction models, because marine biogenic particles have a cooling effect on climate.     

Evaluation by TCAM Model of Physical–Chemical Properties of Aerosol in Northern Italy

The chemical and size characterisation of aerosol in northern Italy was investigated by means of transport chemical aerosol model (TCAM) multiphase model long-term simulations performed within the frame of the CityDelta-CAFE exercise. The results show a high contribution of secondary inorganic compounds, in particular far from the Milan metropolitan area and in the large rural area of the Po valley where the major chemical fractions are ammonium and nitrates. The sulphate contribution is quite similar throughout this region, with the exception of areas close to SOx point emissions. Primary PM and organic compounds fractions, on the other hand, are greater close to major urban areas, in particular the Milan metropolitan zone. This work also presents a seasonal characterisation analysis of physical and chemical aerosol features. The results show that in winter, due to domestic heating emission of NOx and low temperatures, which favour the formation of secondary nitrate and organic aerosol, the PM10 and PM2.5 concentrations are higher than those in summer, in agreement with experimental data presented in several studies focussing on the same region.     

Laboratory and field evidence of the photonitration of 4-chlorophenol to 2-nitro-4-chlorophenol and of the associated bicarbonate effect

Background, aim and scope  

Photochemical processes can decontaminate the aqueous environment from xenobiotics, but they also produce secondary pollutants. This paper presents field and laboratory evidence of the transformation of 4-chlorophenol (4CP) into 2-nitro-4-chlorophenol (2N4CP).