A membrane-aerated biofilm reactor was employed to investigate the nitrogen removal of one typical municipal reverse osmosis(RO) concentrate with a high total nitrogen (TN) concentration and a low C/ N ratio. The effects of operational conditions, including the aeration pressure, the hydraulic retention time and the C/N ratio, on the systematic performance were evaluated. The nitrogen removal mechanism was evaluated by monitoring the effluent concentrations of nitrogen contents. Furthermore, the microbial tolerance with elevated salinity was identified. The results indicated that the optimal TN removal efficiency of 79.2% was achieved of the aeration pressure of 0.02 MPa, hydraulic retention time of 24 h, and the C/N ratio of 5.8, respectively. It is essential to supplement the carbon source for the targeted RO concentrate to promote the denitrification process. The inhibitory effect of salinity on denitrifying bacteria and nitrite oxidizing bacteria was significant, revealing the limited TN removal capacity of the conditions in this work. The TN removal efficiency remained more than 70% with the addition of salt (NaCl) amount below 20 g/L. This work preliminarily demonstrated the MABR feasibility for the nitrogen removal of municipal RO concentrate with low C/N ratio and provided technical guidance for further scale-up application.
Microwave irradiation has been used to prepare Al, Fe-pillared clays from a natural Tunisian smectite from the El Hicha deposit (province of Gabes). Chemical analysis, XRD spectra and surface properties evidenced the success of pillaring process. The obtained solids present higher surface area and pore volume than conventionally prepared Al-Fe pillared clays. The main advantages of the microwave methodology are the considerable reduction of the synthesis time and the consumption of water. The microwave-derived Al-Fe pillared clays have been tested for catalytic wet air oxidation (CWAO) of phenol in a stirred tank at 160°C and 20 bar of pure oxygen pressure. These materials are efficient for CWAO of phenol and are highly stable despite the severe operating conditions (acidic media, high pressure, high temperature). The catalyst deactivation was also significantly hindered when compared to conventionally prepared clays. Al-Fe pillared clays prepared by microwave methodology are promising as catalysts for CWAO industrial water treatment.
Identifying source information after river chemical spill occurrences is critical for emergency responses. However, the inverse uncertainty characteristics of this kind of pollution source inversion problem have not yet been clearly elucidated. To fill this gap, stochastic analysis approaches, including a regional sensitivity analysis method, identifiability plot and perturbation methods, were employed to conduct an empirical investigation on generic inverse uncertainty characteristics under a well-accepted uncertainty analysis framework. Case studies based on field tracer experiments and synthetic numerical tracer experiments revealed several new rules. For example, the release load can be most easily inverted, and the source location is responsible for the largest uncertainty among the source parameters. The diffusion and convection processes are more sensitive than the dilution and pollutant attenuation processes to the optimization of objective functions in terms of structural uncertainty. The differences among the different objective functions are smaller for instantaneous release than for continuous release cases. Small monitoring errors affect the inversion results only slightly, which can be ignored in practice. Interestingly, the estimated values of the release location and time negatively deviate from the real values, and the extent is positively correlated with the relative size of the mixing zone to the objective river reach. These new findings improve decision making in emergency responses to sudden water pollution and guide the monitoring network design.
The feasibility of using Phragmites australis-JS45 system in removing nitrobenzene from sediments was conducted. However, it was observed that nitrobenzene degraded rapidly and was removed completely within 20 days in native sediments, raising the possibility that indigenous microorganisms may play important roles in nitrobenzene degradation. Consequently, this study aimed to verify this possibility and investigate the potential nitrobenzene degraders among indigenous microorganisms in sediments. The abundance of inoculated strain JS45 and indigenous bacteria in sediments was quantified using real-time polymerase chain reaction. Furthermore, community structure of the indigenous bacteria was analyzed through high throughput sequencing based on Illumina MiSeq platform. The results showed that indigenous bacteria in native sediments were abundant, approximately 1014 CFU/g dry weight, which is about six orders of magnitude higher than that in fertile soils. In addition, the levels of indigenous Proteobacteria (Acinetobacter, Comamonadaceae_ uncultured, Pseudomonas, and Thauera) and Firmicutes (Clostridium, Sporacetigenium, Fusibacter, Youngiibacter, and Trichococcus) increased significantly during nitrobenzene removal. Their quantities sharply decreased after nitrobenzene was removed completely, except for Pseudomonas and Thauera. Based on the results, it can be concluded that indigenous microorganisms including Proteobacteria and Firmicutes can have great potential for removing nitrobenzene from sediments. Although P. australis - JS45 system was set up in an attempt to eliminate nitrobenzene from sediments, and the system did not meet the expectation. The findings still provide valuable information on enhancing nitrobenzene removal by optimizing the sediment conditions for better growth of indigenous Proteobacteria and Firmicutes.
Treating water contaminants via heterogeneously catalyzed reduction reaction is a subject of growing interest due to its good activity and superior selectivity compared to conventional technology, yielding products that are non-toxic or substantially less toxic. This article reviews the application of catalytic reduction as a progressive approach to treat different types of contaminants in water, which covers hydrodehalogenation for wastewater treatment and hydrogenation of nitrate/nitrite for groundwater remediation. For hydrodehalogenation, an overview of the existing treatment technologies is provided with an assessment of the advantages of catalytic reduction over the conventional methodologies. Catalyst design for feasible catalytic reactions is considered with a critical analysis of the pertinent literature. For hydrogenation, hydrogenation of nitrate/nitrite contaminants in water is mainly focused. Several important nitrate reduction catalysts are discussed relating to their preparation method and catalytic performance. In addition, novel approach of catalytic reduction using in situ synthesized H2 evolved from water splitting reaction is illustrated. Finally, the challenges and perspective for the extensive application of catalytic reduction technology in water treatment are discussed. This review provides key information to our community to apply catalytic reduction approach for water treatment.
The European Food Safety Authority proposed a concept for the environmental risk assessment of genetically modified plants in the EU that is based on the definition of thresholds for the acceptability of potential adverse effects on the environment. This concept, called Limits of Concern (LoC), needs to be further refined to be implemented in the environmental risk assessment of genetically modified organisms.
Methods
We analyse and discuss how LoC can be defined for the environmental risk assessment for three different types of genetically modified plants. We outline protection goals relevant to the genetically modified plants in question and discuss existing concepts and suggestions for acceptability thresholds from the environmental risk assessment of different regulatory areas. We make specific recommendations for the setting and use of LoC for each type of genetically modified plant.
Results
The LoC concept can be suitably applied for the environmental risk assessment of genetically modified organisms, if the different protection goals in agro-environments are specifically considered. Not only biodiversity protection goals but also agricultural protection goals need to be addressed. The different ecosystem services provided by weeds inside and outside agricultural fields have to be considered for genetically modified herbicide-tolerant crops. Exposure-based LoCs are suggested based on knowledge about dose–effect relationships between maize pollen and non-target Lepidoptera for insect-resistant maize. Due to the long-term nature of biological processes such as spread and establishment, LoCs for genetically modified oilseed rape should be defined for the presence of the genetically modified plant or its genetically modified traits in relevant protection goals.
Conclusions
When setting LoCs, the focus should be on protection goals which are possibly affected. Potential overlaps of the LoC concept with the ecosystem service concept have to be clarified to harmonise protection levels in the agro-environment for different stressors. If additional impacts on agro-biodiversity resulting from the cultivation of genetically modified plants are to be avoided, then high protection levels and low thresholds for acceptable effects (i.e. LoC) should be set.
In July 2018, the European Court of Justice (Case C-528/16) ruled that organisms obtained by directed mutagenesis techniques are to be regarded as genetically modified organisms (GMOs) within the meaning of Directive 2001/18. The ruling marked the next round of the dispute around agricultural genetic engineering in Europe. Many of the pros and cons presented in this dispute are familiar from the debate around the first generation of genetic engineering techniques. The current wave of enthusiasm for the new genetic engineering methods, with its claim to make good on the failed promises of the previous wave, seems to point more to an admission of failure of the last generation of genetic engineering than to a true change of paradigm. Regulation is being portrayed as a ban on research and use, which is factually incorrect, and the judges of the European Court of Justice are being defamed as espousing “pseudoscience”. Furthermore, this highly polarised position dominates the media reporting of the new techniques and the court’s ruling. Advocates of the new genetic engineering techniques appear to believe that their benefits are so clear that furnishing reliable scientific evidence is unnecessary. Meanwhile, critics who believe that the institution of science is in a serious crisis are on the increase not just due to the cases of obvious documented scientific misconduct by companies and scientists, but also due to the approach of dividing the world into those categorically for or against genetic engineering. In this construct of irreconcilable opposites, differentiations fall by the wayside. This article is a response to this one-sided and biased reporting, which often has the appearance of spin and lacks journalistic ethics that require journalists to report on different positions in a balanced and factual manner instead of taking positions and becoming undeclared advocates themselves. 相似文献
The development of cost-effective and highly efficient anode materials for extracellular electron uptake is important to improve the electricity generation of bioelectrochemical systems. An effective approach to mitigate harmful algal bloom (HAB) is mechanical harvesting of algal biomass, thus subsequent processing for the collected algal biomass is desired. In this study, a low-cost biochar derived from algal biomass via pyrolysis was utilized as an anode material for efficient electron uptake. Electrochemical properties of the algal biochar and graphite plate electrodes were characterized in a bioelectrochemical system (BES). Compared with graphite plate electrode, the algal biochar electrode could effectively utilize both indirect and direct electron transfer pathways for current production, and showed stronger electrochemical response and better adsorption of redox mediators. The maximum current density of algal biochar anode was about 4.1 times higher than graphite plate anode in BES. This work provides an application potential for collected HAB to develop a cost-effective anode material for efficient extracellular electron uptake in BES and to achieve waste resource utilization.
