Occupational exposure to formaldehyde in an institute of morphology in Brazil: a comparison of area and personal sampling

Background, aims, and scope

Formaldehyde (FA) is a harmful chemical, which is classified as carcinogenic to humans (Group 1) by the International Agency for Research on Cancer. Solutions of FA that are used to preserve cadavers in research and education morphological institutes represent a risk to occupational health of professionals and students. During the dissection of cadavers in the anatomy laboratories, FA vapors are emitted, resulting in the exposure of students and their instructors to elevated levels of FA. The World Health Organization recommends an air quality guideline value of 0.1 mg m^?3 for exposure to FA. The limit of occupational exposure adopted by the Brazilian legislation (2.3 mg m^?3) is markedly higher than those adopted by institutions of other countries around the world. The purpose of this study was to determine the levels of personal exposure and the area concentration of FA in the morphology department of the Federal Fluminense University, Brazil, and investigate and compare the relationship between them.

Methods

Four rooms distributed in the three floors of the Morphology Department were evaluated: the embalming laboratory, the anatomy laboratories, the corridor of the teachers?? rooms, and the entrance hall. Thirty-six samples in total were collected in the second semester of 2010 and first semester of 2011. The air sampling and FA analysis were performed according to the EPA TO-11A Protocol, using a diffusive sampling device for carbonyl compounds. Personal samples were collected from monitors using a sampling device pinned on each person??s lapel. The samples were analyzed using rapid resolution liquid chromatography with UV-DAD detection at 360 nm.

Results and discussion

The concentrations of FA ranged from 0.20 and 0.18 mg m^?3 in the corridor between the teachers?? rooms, 0.03 to 0.37 mg m^?3 in the entrance hall, 0.22 to 2.07 mg m^?3 in the anatomy laboratory, 2.21 to 2.52 mg m^?3, in the embalming room. The levels found in the corridor between the teachers?? rooms and in the entrance hall were lower than in other compartments because of their large distances to the sources of FA and better ventilation. The other rooms presented higher levels of FA because of the activities carried there (embalming and dissection procedures). Even in the rooms that showed the lowest levels of FA, the values found were higher than those established by all international guideline limits, except the Brazilian legislation limit, although, the concentration level in the embalming room was even greater than the Brazilian guideline. These concentrations are 100?C1,000-fold higher than those reported in an FA outdoor study. The exposure levels of monitors and students ranged from 1.89 to 4.82 mg m^?3, indicating that current practices at the Morphology Department at the university would represent a health risk. The simultaneous monitoring of area concentrations and personal exposure showed that the characteristics of classes and of cadavers?? parts, the number of students in the room and even the activities of the monitors influence the FA concentrations.

Conclusion

This study revealed that the concentration of FA was low in the ventilated areas of the Morphology Department, and that the personal exposure when the person was close to the cadavers during the dissection procedure was higher than the mean FA concentration. This should be considered in the risk assessment of FA during these activities without effective protection equipment. It is suggested that the Brazilian legislation of exposure to formaldehyde requires an urgent update considering international legislation.     

Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option

Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.     

Trends in anecdotal fox sightings in Tasmania accounted for by psychological factors

There has been little evaluation of anecdotal sightings as a means to confirm new incursions of invasive species. This paper explores the potential for equivocal information communicated by the media to account for patterns of anecdotal reports. In 2001, it was widely reported that red foxes (Vulpes vulpes) had been deliberately released in the island state of Tasmania (Australia), although this claim was later revealed to be baseless. Regardless, by 2013 a total of 3153 anecdotal fox sightings had been reported by members of the public, which implied their distribution was wide. For each month in 2001–2003, we defined a monthly media index (MMI) of fox‐related media coverage, an index of their relative seasonal abundance (abundance), and a factor denoting claims of fox evidence (claimed evidence) regardless of its evidentiary quality. We fitted a generalized linear model with Poisson error for monthly totals of anecdotal sightings with factors of year and claimed evidence and covariates of MMI, abundance, and hours of darkness. The collective effect of psychological factors (MMI, claimed evidence, and year) relative to biophysical factors (photoperiod and abundance) was highly significant (χ² = 122.1, df = 6, p < 0.0001), whereas anticipated changes in abundance had no significant influence on reported sightings (p = 0.15). An annual index of fox media from 2001 to 2010 was strongly associated with the yearly tally of anecdotal sightings (p = 0.018). The odds ratio of sightings ranked as reliable by the fox eradication program in any year decreased exponentially at a rate of 0.00643 as the total number of sightings increased (p < 0.0001) and was indicative of an observer‐expectancy bias. Our results suggest anecdotal sightings are highly susceptible to cognitive biases and when used to qualify and quantify species presence can contribute to flawed risk assessments.     

Reducing carbon emissions in Portugal: the relative roles of fossil fuel prices,energy efficiency,and carbon taxation

We assess the role of fossil fuel prices, energy efficiency, and carbon taxation in achieving climate policy goals using a dynamic general-equilibrium model of the Portuguese economy. Given the forecasts for international fossil fuel prices, improving energy efficiency and implementing a new carbon tax have significantly different economic and budgetary effects. Greater energy efficiency reduces emissions and has a positive economic effect, but increases public and foreign debt. A carbon tax reduces emissions at a cost for the economy, but leads to positive effects on public and foreign debt. Thus, it is important to pursue both strategies. We estimate that under the reference-price scenario, a steady energy efficiency gain of 2%–2.5% per year and a carbon tax of at least 35 € per tCO₂ are needed to achieve the stated goal of reducing carbon dioxide emissions by 2030 by an amount equivalent to 40% of the emissions in 1990. These views were fully integrated in a proposal presented by the Commission for Environmental Tax Reform to the Portuguese Government in September 2014, and then discussed in Parliament in November 2014, before enacting a new carbon tax on 1 January 2015.     

Monitoring and modeling of long-term settlements of an experimental landfill in Brazil

Settlement evaluation in sanitary landfills is a complex process, due to the waste heterogeneity, time-varying properties and influencing factors and mechanisms, such as mechanical compression due to load application and creep, and physical–chemical and biological processes caused by the wastes decomposition. Many empirical models for the analysis of long-term settlement in landfills are reported in the literature. This paper presents the results of a settlement monitoring program carried out during 6 years in Belo Horizonte experimental landfill. Different sets of field data were used to calibrate three long-term settlement prediction models (rheological, hyperbolic and composite). The parameters obtained in the calibration were used to predict the settlements and to compare with actual field data. During the monitoring period of 6 years, significant vertical strains were observed (of up to 31%) in relation to the initial height of the experimental landfill. The results for the long-term settlement prediction obtained by the hyperbolic and rheological models significantly underestimate the settlements, regardless the period of data used in the calibration. The best fits were obtained with the composite model, except when 1 year field data were used in the calibration. The results of the composite model indicate settlements stabilization at larger times and with larger final settlements when compared to the hyperbolic and rheological models.     

Influence of Brazilian herbal regulations on the use and conservation of native medicinal plants

For decades, several native medicinal species have been used by the pharmaceutical industry in Brazil to create commercial products. In 1995, the Ministry of Health, following the recommendations of the World Health Organization, established herbal regulations (RDC 17) in order to improve the quality of such products. In fact, only plant species with conclusive results from pharmacological and toxicological studies can be used for creating medicines. In this study, we evaluated the consequences of RDC 17 on the use and conservation of native medicinal plants by comparing the plant material used by six companies in 1995/1996 and 10 years later (2005/2006). Eighty-three different species were used in 1995/1996, 50 of them native (60.2%), 16 exotic (19.3%), and 17 imported (20.5%). In 2005/2006, 44 species were used by the companies and only 19 (43.2%) were native. The category of plant material that saw the largest decrease in use was roots, and in 2005/2006 leaves were more used. The study shows a strong reduction in the collection of native species signalizing the importance of herbal regulations on their conservation. It also points to the need for pharmacological and toxicological studies of the Brazilian native medicinal flora, as well as studies on their ecology and conservation.     

Major inputs and mobility of potentially toxic elements contamination in urban areas

Soil quality in urban areas is affected by anthropogenic activities, posing a risk to human health and ecosystems. Since the pseudo-total concentrations of potentially toxic elements may not reflect their potential risks, the study of element mobility is very important on a risk assessment basis. This study aims at characterising the distribution and major sources of 34 elements in two Portuguese urban areas (Lisbon and Viseu), with different geological characteristics, industrial and urban development processes. Furthermore, the potential availability of As, Co, Cr, Cu, Ni, Pb and Zn was assessed, by measuring the fraction easily mobilised. Lisbon is enriched in elements of geogenic and anthropogenic origin, whereas in the smaller city, the high levels observed are mainly related to a geogenic origin. Background values can be more relevant than the dimension of the city, even when anthropogenic components may be present, and this parameter should be considered when comparing results from different cities. Regarding the potential available fraction, a high variability of results was observed for elements and for sampling sites with an influence of the soil’s general characteristics. Elements showing very high concentrations due to geological reasons presented, in general, a low mobility and it was not dependent on the degree of contamination. For elements with major anthropogenic origin, only Zn was dependent on the pseudo-total content. Yet, the highest available fractions of some elements, both with major geogenic and anthropogenic origin, were observed in specific contaminated samples. Therefore, a site-specific evaluation in urban soils is important due to the high spatial variability and heterogeneity.     

Mercury bioaccumulation and decontamination kinetics in the edible cockle Cerastoderma edule

Mercury bioaccumulation and decontamination kinetics in the edible cockle Cerastoderma edule were studied through a mesocosms experiment after a medium-term exposure to the metal.The results revealed that the bivalve presented distinct bioaccumulation kinetics according to the different tissues. While the gills showed a linear accumulation pattern, the digestive gland and the entire organism presented a saturation model, with higher accumulation during the first 7d of exposure and lower during the rest of the time. In addition, the bioaccumulation rate was not proportional to the Hg concentration, since the organisms under lower contamination presented higher bioconcentration factors than the ones under higher contamination. Gills were the tissues with higher mercury accumulation capability.Concerning the decontamination phase, C. edule lost approximately 80% of the mercury after 24 h exposure in clean seawater. Nevertheless, never reached the original condition, showing in the final (20 d detox), Hg levels (>0.5 ppm) higher than those allowed by the legislation regulating human food consumption. This represents a matter of concern for Human health.     

Solid-phase fluorescence spectroscopy to characterize organic wastes

The production of solid organic waste (SOW) such as sewage sludge (SS) or municipal solid waste (MSW) has been continuously increasing in Europe since the beginning of the 1990'. Today, the European Union encourages the stabilization of these wastes using biologic processes such as anaerobic digestion and/or composting to produce bio-energy and organic fertilizers. However, the design and management of such biologic processes require knowledge about the quantity and quality of the organic matter (OM) contained in the SOW. The current methods to characterize SOW are tedious, time-consuming and often insufficiently informative. In this paper, we assess the potential of solid-phase fluorescence (SPF) spectroscopy to quickly provide a relevant characterization of SOW. First, we tested well known model compounds (tryptophan, bovine serum albumin, lignin and humic acid) and biologic matrix (Escherichia coli) in three dimensional solid-phase fluorescence (3D-SPF) spectroscopy. We recorded fluorescence spectra from proteinaceous samples but we could not record the fluorescence emitted by lignin and humic acid powders. For SOW samples, fluorescence spectra were successfully recorded for MSW and most of its sub-components (foods, cardboard) but impossible for SS, sludge compost (SC) and ligno-cellulosic wastes. Based on visual observations and additional assays, we concluded that the presence of highly light-absorptive chemical structures in such dark-colored samples was responsible for this limitation. For such samples, i.e. lignin, humic acid, SS, SC and ligno-cellulosic wastes, we show that laser induced fluorescence (LIF) spectroscopy enables the acquisition of 2D fluorescence spectra.