Comparison of API650-2008 provisions with FEM analyses for seismic assessment of existing steel oil storage tanks

API650-2008 is one of the prominent codes consisting of seismic specifications to design steel storage tanks for earthquakes resistance. In spite of the code's broad application, there are some failure modes such as slide bottom, elephant-foot buckling, sloshing and uplift needing more evaluation. In this paper, 161 existing tanks in an oil refinery complex have been classified into 24 groups and investigated using both API650-2008 rules and numerical FEM models. Failure modes and dynamic characteristics of studied models have been calculated by numerical FEM analysis and compared with code requirements. The results demonstrate that, in some cases, there are some imperfections in the code requirements that require further investigation.     

Comparative assessment of respiratory and other occupational health effects among elementary workers

Objective. This study was conducted to assess hazards faced by elementary workers. Methods. A questionnaire survey and a respiratory function test (spirometry) were carried out on 150 respondents. Results. Major hazards identified related to sharp objects, heavy weight lifting, thermally harsh conditions, working at height, whole body vibration, chemicals, pathogens, increased noise levels and confined space entry. Workers suffered from upper and lower respiratory disorder symptoms, digestive problems, optical and musculoskeletal issues, etc. Spirometric measurement showed obstructive lung disorders to be highest among construction workers (CW) (48%) followed by sanitation workers (SW) (32%) and solid waste pickers (SWP) (28%). Restrictive lung pattern was dominant among SW (56%) followed by SWP (46%) and CW (42%). The observed FEV₁/FVC in diseased SWP, SW and CW ranged from 51 to 96%, from 52 to 98% and from 31 to 99% respectively while observed mean FEV₁ was 2.15, 1.79 and 1.70 L, respectively. Conclusion. The study findings show that occupational exposure can significantly influence respiratory system impairment and contribute to other ailments among elementary workers. The study recommends use of appropriate protective equipment and regular medical examination for early recognition of any health risk so that timely interventions for effective management may be undertaken.     

Determination of ultra-trace amounts of cadmium by ET-AAS after column preconcentration with a new sorbent of modified MWCNTs

The present research reports on the application of modified multiwalled carbon nanotubes as a new, easily prepared, and stable solid sorbent for the column preconcentration of ultra-trace amounts of cadmium in aqueous solution. Multiwalled carbon nanotubes were oxidized with concentrated HNO₃ and modified with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and then were used as a solid phase for the column preconcentration of Cd(II). Elution was carried out with 0.5 mol?L^?1 HNO₃. The amount of eluted Cd(II) was measured using electrothermal atomic absorption spectrometry. Various parameters such as pH, sample and eluent flow rate, eluent concentration, breakthrough volume, and interference of a great number of anions and cations on the retention of analyte on sorbent were studied. Under the optimized conditions, the calibration graph was linear in the range of 0.67 ng?L^?1 to 5.0 μg?L^?1 and the detection limit (3S_b, n?=?7) was 0.14 ng?L^?1 in initial solution. A preconcentration factor of 300 and relative standard deviations of ±3.6 % for seven successive determinations of 3 ng of Cd(II) were achieved. The column preconcentration was successfully applied to the analysis of river water, waste water, and Persian Gulf water sample.     

Determining the most suitable areas for artificial groundwater recharge via an integrated PROMETHEE II-AHP method in GIS environment (case study: Garabaygan Basin, Iran)

Flood spreading is a suitable strategy for controlling and benefiting from floods. Selecting suitable areas for flood spreading and directing the floodwater into permeable formations are amongst the most effective strategies in flood spreading projects. Having combined geographic information systems (GIS) and multi-criteria decision analysis approaches, the present study sought to locate the most suitable areas for flood spreading operation in the Garabaygan Basin of Iran. To this end, the data layers relating to the eight effective factors were prepared in GIS environment. This stage was followed by elimination of the exclusionary areas for flood spreading while determining the potentially suitable ones. Having closely examined the potentially suitable areas using the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) II and analytic hierarchy process (AHP) methods, the land suitability map for flood spreading was produced. The PROMETHEE II and AHP were used for ranking all the alternatives and weighting the criteria involved, respectively. The results of the study showed that most suitable areas for the artificial groundwater recharge are located in Quaternary Q_g and Q^gsc geologic units and in geomorphological units of pediment and Alluvial fans with slopes not exceeding 3 %. Furthermore, significant correspondence between the produced map and the control areas, where the flood spreading projects were successfully performed, provided further evidence for the acceptable efficiency of the integrated PROMETHEE II-AHP method in locating suitable flood spreading areas.     

Comparison of first-order-decay modeled and actual field measured municipal solid waste landfill methane data

The first-order decay (FOD) model is widely used to estimate landfill gas generation for emissions inventories, life cycle assessments, and regulation. The FOD model has inherent uncertainty due to underlying uncertainty in model parameters and a lack of opportunities to validate it with complete field-scale landfill data sets. The objectives of this paper were to estimate methane generation, fugitive methane emissions, and aggregated collection efficiency for landfills through a mass balance approach using the FOD model for gas generation coupled with literature values for cover-specific collection efficiency and methane oxidation. This study is unique and valuable because actual field data were used in comparison with modeled data. The magnitude and variation of emissions were estimated for three landfills using site-specific model parameters and gas collection data, and compared to vertical radial plume mapping emissions measurements. For the three landfills, the modeling approach slightly under-predicted measured emissions and over-estimated aggregated collection efficiency, but the two approaches yielded statistically equivalent uncertainties expressed as coefficients of variation. Sources of uncertainty include challenges in large-scale field measurement of emissions and spatial and temporal fluctuations in methane flow balance components (generated, collected, oxidized, and emitted methane). Additional publication of sets of field-scale measurement data and methane flow balance components will reduce the uncertainty in future estimates of fugitive emissions.     

Factors Influencing Unsafe Behaviors and Accidents on Construction Sites: A Review

Objective. Construction is a hazardous occupation due to the unique nature of activities involved and the repetitiveness of several field behaviors. The aim of this methodological and theoretical review is to explore the empirical factors influencing unsafe behaviors and accidents on construction sites. Methods. In this work, results and findings from 56 related previous studies were investigated. These studies were categorized based on their design, type, methods of data collection, analytical methods, variables, and key findings. A qualitative content analysis procedure was used to extract variables, themes, and factors. In addition, all studies were reviewed to determine the quality rating and to evaluate the strength of provided evidence. Results. The content analysis identified 8 main categories: (a) society, (b) organization, (c) project management, (d) supervision, (e) contractor, (f) site condition, (g) work group, and (h) individual characteristics. The review highlighted the importance of more distal factors, e.g., society and organization, and project management, that may contribute to reducing the likelihood of unsafe behaviors and accidents through the promotion of site condition and individual features (as proximal factors). Conclusion. Further research is necessary to provide a better understanding of the links between unsafe behavior theories and empirical findings, challenge theoretical assumptions, develop new applied theories, and make stronger recommendations.     

Effects of magnetic field and rotary tool on EDM performance

In this work, the effects of tool rotation and various intensities of external magnetic field on electrical discharge machining (EDM) performance have been studied. Experimental trials divided into three regimes of low energy regime, middle energy regime and high energy regime. The influences of process parameters were investigated on main outputs of material removal rate (MRR) and surface roughness (SR). In order to correlate the input parameters and output values two mathematical models were developed to predict the MRR and SR according to variations of discharge energy, magnetic field intensity and tool rotational speed. Results indicated that the applying a rotational magnetic field around the machining gap improves the MRR and SR. Combination of rotational magnetic field and rotary electrode increases the machining performance, in comparison of previous conditions. This is due to better flushing debris from machining gap. This work introduces a new method for improving the machining performance, in cost and time points of view.     

Piperazine-modified activated carbon as a novel adsorbent for CO2 capture: modeling and characterization

Environmental Science and Pollution Research - In this study, activated carbon and piperazine-modified activated carbon adsorbents were prepared and used for CO2 adsorption. The effect of various...     

Controlled Release 7-Methoxytacrine-Polycaprolactone Nanocapsules Drug-Delivery System for Alzheimer's Disease Treatment: Synthesis and Physico-Chemical Characterization

Journal of Polymers and the Environment - Alzheimer’s disease is the most prevalent cause of dementia in aging people. 7-Methoxytacrine (7-MEOTA) is one of the approved drugs for the...     

Experimental and Numerical Analysis of CO Concentration Dispersion of Vehicular Exhaust Emissions in Isolated Environment

Numerical and experimental analyses were applied to carbon monoxide (CO) concentration dispersion to monitor air quality in an enclosed residential complex parking area in Tehran. Firstly, the parking area was preliminary assessed through verifying the characteristics of the problem including the geometry and boundary conditions. Then, proportion of vehicular exhaust emissions was estimated and eventually experimental and numerical analyses were performed. In order to perform numerical calculation, a three-dimensional model was created to numerically simulate the enclosed residential complex parking area by FLUENT software that solves flow governing equations with finite volume method. In FLUENT, species model was selected to assess the dispersion of CO in flow domain. In experimental analysis, CO concentration was measured using sampling bags with a volume of 10 l in 4 min at 6 different points. The sample air was drawn into sampling bags by electric pumps. The findings show that the maximum amount of CO concentration is above the permissible standard recommended by the World Health Organization. Pollutant accumulation was significant in confined areas. In the place where openings exist, the level of accumulation was lower than other areas. The findings obtained from numerical simulation are in complete accord with experimental results.