Resource recovery from urban stock,the example of cadmium and tellurium from thin film module recycling

Raw material supply is essential for all industrial activities. The use of secondary raw material gains more importance since ore grade in primary production is decreasing. Meanwhile urban stock contains considerable amounts of various elements. Photovoltaic (PV) generating systems are part of the urban stock and recycling technologies for PV thin film modules with CdTe as semiconductor are needed because cadmium could cause hazardous environmental impact and tellurium is a scarce element where future supply might be constrained. The paper describes a sequence of mechanical processing techniques for end-of-life PV thin film modules consisting of sandblasting and flotation. Separation of the semiconductor material from the glass surface was possible, however, enrichment and yield of valuables in the flotation step were non-satisfying. Nevertheless, recovery of valuable metals from urban stock is a viable method for the extension of the availability of limited natural resources.     

Element contents and food safety of water spinach (Ipomoea aquatica Forssk.) cultivated with wastewater in Hanoi, Vietnam

Extensive aquatic or semi-aquatic production of water spinach (Ipomoea aquatica Forssk.) for human consumption takes place in Southeast Asia. The aim of this study was to assess the concentrations of 38 elements in soil and water spinach cultivated under different degrees of wastewater exposure in Hanoi, Vietnam. The results showed no effect of wastewater use on the overall element concentrations in soil and water spinach. Mean soil concentrations for selected potentially toxic elements at the studied field sites had the following ranges 9.11–18.7 As, 0.333–0.667 Cd, 10.8–14.5 Co, 68–122 Cr, 34.0–62.1 Cu, 29.9–52.8 Ni, 32.5–67.4 Pb, 0.578–0.765 Tl and 99–189 Zn mg kg⁻¹ dry weight (d.w.). In all samples Cd, Pb and Zn soil concentrations were below the Vietnamese Guideline Values (TCVN 7209-2002) for agricultural soils whereas As and Cu exceeded the guideline values. Maximum site element concentrations in water spinach were 0.139 As, 0.032 Cd, 0.135 Cr, 2.01 Cu, 39.1 Fe, 57.3 Mn, 0.16 Ni, 0.189 Pb and 6.01 Zn mg kg⁻¹ fresh weight (f.w.). The site and soil content of organic carbon were found to have high influence on the water spinach element concentrations whereas soil pH and the total soil element concentrations were of less importance. The estimated average daily intake of As, Cd, Cu, Fe, Pb and Zn for adult Vietnamese consumers amounts to <11% of the maximum tolerable intake proposed by FAO/WHO for each element. It is assessed that the occurrence of the investigated elements in water spinach will pose low health risk for the consumers.     

Status and Trends of Ontario's Sydenham River Ecosystem in Relation to Aquatic Species at Risk

The Sydenham River in southwestern Ontario is located in the Mixedwood Plains Ecozone, which supports the greatest diversity of flora and fauna in Canada. The river historically supported a rich aquatic community that included 80 fishes and 34 species of freshwater mussels. Fourteen aquatic species native to the river (8 fishes, 5 mussels and 1 turtle) have been designated as endangered, threatened, or of special concern by the Committee on the Status of Species at Risk in Canada (COSEWIC). A multi-agency Recovery Team was formed in 1999 to ensure the continued survival of these and other rare species in the river. The Sydenham River Recovery Team is the first in Canada to adopt an ecosystem approach to recovery planning for aquatic species. Information on land use patterns, water quality trends, the physical condition of the river, and the distributions of aquatic species at risk was synthesized to gain an understanding of the overall health of the river and its major anthropogenic stresses. Seven of the species at risk have declined in distribution or abundance, and three may be extirpated. The main threat to fishes and mussels is heavy loadings of sediment, nutrients, and possibly pesticides to the river via tile drainage and overland runoff from agricultural lands. A strategy that incorporates four overall approaches (management, stewardship, research and monitoring, and awareness and outreach) was developed to recover and protect this globally significant freshwater ecosystem.     

Estimating a distance dependent contagion function using point sample data

Natural events and human activities cause changes in landscape structure. Landscape metrics are used as a useful tool to study landscape trends and ecological processes related to the landscape structure. These metrics are commonly calculated on wall-to-wall raster data from remote sensing. A recent trend is to use sample data to estimate landscape metrics. In this study, point sampling was used to estimate a vector-based and distance dependent contagion metric. The metric is an extension of the established contagion. The statistical properties, for both unconditional and conditional contagions, were assessed by a point (point pairs) sampling experiment in maps from the National Inventory of landscapes in Sweden. Random and systematic sampling designs were tested for nine point distances and five sample sizes and for two classification systems. The systematic design showed slightly smaller root mean square error (RMSE) and bias than the random design. Both true and estimated values were calculated using computer programs in FORTRAN, which was specifically written for the purpose of the study. For a given sample size, RMSE and bias increased with increasing point distance. The estimator of unconditional contagion had acceptable RMSE and bias for moderate sample sizes, but in the conditional case the bias (and thus the RMSE) was unacceptably large. The main reason for this is that small classes (by area) affect both the true value of the contagion and are often missing in the sample. The method proposed can be adopted in gradient-based model of landscape structure where no distinct border is assumed between polygons. The method can also be applied in field-based inventories.     

pH-dependent release of cadmium,copper, and lead from natural and sludge-amended soils

The pH-dependent release of cadmium, copper, and lead from soil materials was studied by use of a stirred flow cell to quantify their release and release rates, and to evaluate the method as a test for the bonding strength and potential mobility of heavy metals in soils. Soil materials from sludge-amended and nonamended A horizons from a Thai coarse-textured Kandiustult and a Danish loamy Hapludalf were characterized and tested. For each soil sample, release experiments with steady state pH values in the range 2.9 to 7.1 and duration of 7 d were performed. The effluent was continuously collected and analyzed. Release rates and total releases were higher for the Hapludalf than the Kandiustult and higher for the sludge-amended soils than the nonamended soils. With two exceptions the relative release rates (release rate/total content of metal in soil) plotted vs. steady state pH followed the same curves for each metal, indicating similar bonding strengths. These curves could be described by a rate expression of the form: relative release rate = k[H+]a, with specific a (empirical constant) and k (rate constant) parameters for each metal demonstrating that metal release in these systems can be explained by proton-induced desorption and dissolution reactions. With decreasing pH, pronounced increases in release rates were observed in the sequence cadmium > lead > copper, which express the order of metal lability in the soils. The flow cell system is useful for comparison of metal releases as a function of soil properties, and can be used as a test to rank soils with respect to heavy metal leaching.     

Distribution and flux of 238Pu, 239,240Pu, 241Am, 137Cs and 210Pb to high arctic lakes in the Thule district (Greenland)

Environmental samples (soil, sediment and lake water) in the Thule area (NW Greenland) have been studied to assess the contamination of radionuclides originating from a nuclear weapons accident (the Thule accident in 1968). Four lakes were chosen at different distances from the point of impact with the Thule air base community situated in between. The sedimentation rates in the lakes varied from 0.4 mm a(-1) (5 mg cm(-2) a(-1)) to 1.6 mm a(-1) (82 mg cm(-2) a(-1)). With these sedimentation rates, it is not possible to resolve the (239,240)Pu global fallout peak from a possible (239,240)Pu "accident" peak in the sediment depth profiles. However, the (239,240)Pu/(137)Cs and the (238)Pu/(239,240)Pu ratios agreed well with global fallout ratios, indicating that plutonium originating from the accident had not reached these lakes. This also indicates that the Thule air base community has probably only been exposed to radionuclides from the accident to a very limited extent. A limited study showed that (210)Pb could not be used as a normalizing nuclide to explain the transport of transuranic elements from the catchment area to the lake, i.e. (210)Pb has a different transport mechanism from that of the transuranic elements studied in this investigation.     

Distribution of Np and Pu in Swedish lichen samples (Cladonia stellaris) contaminated by atmospheric fallout

The activity concentrations of (237)Np and the two Pu isotopes, (239)Pu and (240)Pu, were determined in lichen samples (Cladonia stellaris) contaminated by fallout from atmospheric nuclear test explosions and the Chernobyl accident. The samples were collected at 18 locations in Sweden, from north to south, between 1986 and 1988 and analysed with high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) and alpha spectrometry. Data on the activity ratios (238)Pu/(239+240)Pu and (134)Cs/(137)Cs measured previously were also included in this study for comparison. The (237)Np activity concentration ranged from 0.08 +/- 0.01 to 2.08 +/- 0.17 MBq kg(-1), depending on the location of the sampling site and time of collection. The (239+240)Pu activity concentration ranged from 0.09 +/- 0.01 to 4.09 +/- 0.15 Bq kg(-1), with the (240)Pu/(239)Pu atomic ratio ranging between 0.16 +/- 0.01 and 0.44 +/- 0.03, the higher ratios indicating a combination of weapons test fallout and Chernobyl fallout. The (237)Np/(239)Pu atomic ratios ranged between 0.06 +/- 0.01 and 0.42 +/- 0.04, the lower ratios indicating combination of weapons test fallout and Chernobyl fallout. At a well-defined sampling site at Lake Rogen (62.32 degrees N, 12.38 degrees E), additional lichen samples were collected between 1987 and 1998 to study the distribution of Np and Pu in different layers. The concentrations of the two elements follow each other quite well in the profile.