Health risk assessment of air emissions from a municipal solid waste incineration plant--a case study

A health risk assessment of long-term emissions of carcinogenic and non-carcinogenic air pollutants has been carried out for the municipal solid waste incinerator (MSWI) of the city of Taranto, Italy. Ground level air concentrations and soil deposition of carcinogenic (Polychlorinated Dibenzo-p-Dioxins/Furans and Cd) and non-carcinogenic (Pb and Hg) pollutants have been estimated using a well documented atmospheric dispersion model. Health risk values for air inhalation, dermal contact, soil and food ingestion have been calculated based on a combination of these concentrations and a matrix of environmental exposure factors. Exposure of the surrounding population has been addressed for different release scenarios based on four pollutants, four exposure pathways and two receptor groups (children and adults). Spatial risk distribution and cancer excess cases projected from plant emissions have been compared with background mortality records. Estimated results based on the MSWI emissions show: (1) individual risks well below maximum acceptable levels, (2) very small incremental cancer risk compared with background level.     

Assessment of the relative toxicity of Cu2+ by measuring structural changes of supercoiled DNA

A method for the measurement of the relative toxicity of Cu2+ in aquatic environments is proposed. It is based on the quantitative measurement on the shape change of the supercoiled DNA after it is contacted with different levels of Cu2+ for various time intervals. In the absence of any redox reagents, all supercoiled DNA degraded into other forms of DNA after 24h incubation in the presence of 5.13 x 10(-3), 5.08 x 10(-4) and 5.35 x 10(-5)mol/L Cu2+. At a lower Cu2+ concentration (10(-6)mol/L), 44% of supercoiled DNA retained its original supercoiled form after 24 h, and 29% after 48 h. The concentration of RC50, i.e. concentration of pollutants at which 50% of the supercoiled DNA was relaxed compared to control samples, can be obtained from the does-response curves at different exposure time, which may provide a rapid and convenient approach to assess the relative toxicity of environmental pollutants.     

Extending large-scale forest inventories to assess urban forests

Urban areas are continuously expanding today, extending their influence on an increasingly large proportion of woods and trees located in or nearby urban and urbanizing areas, the so-called urban forests. Although these forests have the potential for significantly improving the quality the urban environment and the well-being of the urban population, data to quantify the extent and characteristics of urban forests are still lacking or fragmentary on a large scale. In this regard, an expansion of the domain of multipurpose forest inventories like National Forest Inventories (NFIs) towards urban forests would be required. To this end, it would be convenient to exploit the same sampling scheme applied in NFIs to assess the basic features of urban forests. This paper considers approximately unbiased estimators of abundance and coverage of urban forests, together with estimators of the corresponding variances, which can be achieved from the first phase of most large-scale forest inventories. A simulation study is carried out in order to check the performance of the considered estimators under various situations involving the spatial distribution of the urban forests over the study area. An application is worked out on the data from the Italian NFI.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Survey on fluoride, bromide and chloride contents in public drinking water supplies in Sicily (Italy)

Six hundred and sixty-seven water samples were collected from public drinking water supplies in Sicily and analysed for electric conductivity and for their Cl(-), Br(-) and F(-) contents. The samples were, as far as possible, collected evenly over the entire territory with an average sampling density of about one sample for every 7,600 inhabitants. The contents of Cl(-) and Br(-), ranging between 5.53 and 1,302 mg/l and between <0.025 and 4.76 mg/l respectively, correlated well with the electric conductivity, a parameter used as a proxy for water salinity. The highest values were found both along the NW and SE coasts, which we attributed to seawater contamination, and in the central part of Sicily, which we attributed to evaporitic rock dissolution. The fluoride concentrations ranged from 0.023 to 3.28 mg/l, while the highest values (only three exceeding the maximum admissible concentration of 1.5 mg/l) generally correlated either with the presence in the area of crystalline (volcanic or metamorphic) or evaporitic rocks or with contamination from hydrothermal activity. Apart from these limited cases of exceeding F(-) levels, the waters of public drinking water supplies in Sicily can be considered safe for human consumption for the analysed parameters. Some limited concern could arise from the intake of bromide-rich waters (about 3% exceeding 1 mg/l) because of the potential formation of dangerous disinfection by-products.     

Bioaccumulation of metals in common carp (<Emphasis Type="Italic">Cyprinus carpio</Emphasis> L.) from water bodies of Anatolia (Turkey): a review with implications for fisheries and human food consumption

Although fish is widely consumed by humans for its nutritional properties, accumulation of heavy metals can pose serious health hazards. Widespread common carp Cyprinus carpio is cultured worldwide and represents an economically important species for fisheries in several countries. These include Turkey, where C. carpio often makes for a large part of the sales of the locally marketed fish and also for a traditional dish. This study provides a review of bioaccumulation of metals in tissues of C. carpio from water bodies of Anatolia and also includes reference to worldwide studies. From 42 water bodies across the region, 27 metals in total were studied, of which Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were the most widely analysed, mainly in the muscle, liver and gill tissues. Amongst the potentially toxic metals, Cd, Cr and Pb occurred in several water bodies at concentrations not only above maximum allowed limits but also higher relative to other water bodies worldwide, even though As, Hg and Ni were also sometimes present at potentially hazardous concentrations. The essential metals Cu, Fe, Mn, Se and Zn were detected at various concentrations, with the latter two occasionally above limit. All water bodies flagged as having especially critical (i.e. above limit) concentrations of toxic metals supported C. carpio fisheries from highly populated regions, raising concern about food safety and calling for preventative measures. Given the significantly lower bioaccumulation levels in the muscle relative to the liver and gill tissues, it is suggested that consumption of C. carpio as fillets may be safer than after processing into e.g. meat balls and sausages. The limits of 1.0 μg/g for Cr and 1.15 μg/g for Se, currently lacking from the Turkish food safety legislation, are proposed, and it is suggested that a similar meta-analytical approach as adopted in this study may benefit other countries where C. carpio represents an important fisheries resource.     

Properties of Glauconite/Polyaniline Composite Prepared in Aqueous Solution of Citric Acid

Hybrid composite made of glauconite and polyaniline was prepared in aqueous solution of citric acid. Scanning electron microscopy combined with energy dispersive X-ray analysis shows uniform aggregates made of glauconite microparticles and polyaniline matrix. The results of X-ray powder diffraction suggest that: (1) citric acid used for the polymerisation of aniline causes formation of emeraldine salt where macromolecular ordering in the amorphous polymer takes place; (2) no chemical interaction between glauconite and emeraldine takes place in the prepared composite. FT-IR spectra of the prepared polymer and composite show features indicating all the functional groups that are present in the diiminoquinone–diaminobenzene state of polyaniline. Thermal stability of the composite was higher than the prepared polymer suggesting the occurrence of an interphase interaction between glauconite and emeraldine. After pyrolysis in purified nitrogen the composite still remained glauconite, and ε-Fe3N together with amorphous and graphitic carbon were found as reaction products. The values of electrical conductivity and magnetization of the composite suggest that optimization of these values might be achieved based upon the relationship between glauconite and polyaniline.     

Photochemical behaviour of the systemic fungicide carboxin

Irradiation of carboxin (1) with a 500 W UV lamp (filter Pyrex) in CH3CN leads to the products 3, 5-8, 12-14 depending upon the reaction conditions. All photo-products were isolated and characterized. Photooxidation occurred even if unsensitized, while photoalteration was very slow in the absence of oxygen. The main oxygenated-products 3 and 13 were also recovered under biomimetic conditions by exposure of an aqueous solution of 1 to sunlight.     

Life cycle energy and CO2 emissions analysis of food packaging: an insight into the methodology from an Italian perspective

Packaging is strictly connected to environmental issues as it is a product characterised by high material consumption rate; it is often transported over long distances and has a short life. Providing environmental analysis is, therefore, urgent to identify energy and resources efficient solutions. The paper, taking advantage of a real case study, presents a life cycle-based comparative analysis among three different food packaging systems. The paper compares the life cycle of tin steel, polypropylene and glass-based packaging of an Italian preserves producer. The analysis leads to the conclusion that, for the baseline scenario, polypropylene packaging represents the greenest solution, whereas glass packaging is the worst choice. The paper presents a scenario analysis varying both the method used for accounting for recycling as well as the recycling rates of the packaging materials. Changes in overall results with parameters analysis changing are calculated and highlighted throughout the paper. The impact of a reuse policy of the glass-based solution is also analysed; a model for disposable glass packaging is proposed and the obtained results are compared with the single use polypropylene and tin steel-based packaging. In order to analyse the impact of different End of Life scenarios on the present case study, collecting as well as recycling rates of some European countries have been used. The results revealed a significant fluctuation both in energy consumption and in CO₂ emission as the nation changes. Summing up, a methodology for packaging environmental impact analysis is applied to a real case study, some crucial aspects of the methodology have been analysed in depth in order to give a contribution in packaging environmental impact analysis.