土地承载力研究范式的变迁、分化及其综论

基于Kuhn范式理论,将现有土地承载力研究成果显化、梳理为4种主要研究范式,即基于限制因子的研究范式、基于多因素综合的研究范式、基于参照区的研究范式、基于生态足迹的研究范式。以范式应用的时代背景、空间尺度为着眼点,对各类范式进行综合比较,结果显示：基于限制因子的土地承载力研究范式起源最早、发展最为成熟,基于多因素综合、基于参照区、基于生态足迹的3种研究范式,均是以前者为基础,按照不同的方向分化而成;范式分化的原因在于时空条件的变化所引致的亟需解释、解决的现实问题的变化。范式本身并无优劣之分,但有其独特的适应性：基于限制因子、基于生态足迹的两种研究范式适用于全球及国家等大尺度土地承载力问题,且发展较为成熟,其成果具有较强的理论和实践指导意义;基于多因素综合及基于参照区的两种研究范式适用于市县等中小尺度,但其研究较为薄弱,所得的承载力分值、承载力相对值对区域土地管理实践的指导价值有限。当前,市县等中小尺度土地承载力研究亟需加强,其指导实践的有效性与可操作性亟待大幅度提高。     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.     

房屋建筑工程施工现场环境保护以及节能降耗控制措施研究

房屋建筑施工阶段是建筑工程中最为重要的阶段,也是资源消耗和环境污染的集中阶段。房屋建筑施工造成的环境污染主要来源于:施工中的固体垃圾、液体垃圾和气体垃圾,且在施工现场,相关人员节能降耗意识薄弱,对于施工中存在的资源浪费现象经常会忽视。基于此,给出了如下措施:加强施工过程的监控,合理排放施工现场的污水和固体废弃物;提高水的利用率,并在施工过程中,通过节水工艺对路面进行喷洒;合理排放施工过程产生的污水,对含有化学品、油漆的建筑材料要实施防渗漏措施;设置封闭式垃圾容器,利用袋装化形式将施工垃圾带出施工现场;倡导绿色施工。     

海水中阴极极化对X80钢应力腐蚀及氢脆敏感性的影响

目的研究不同p H值海水中阴极极化对X80管线钢应力腐蚀及氢脆的抑制作用。方法采用慢应变速率拉伸试验、电化学测试、微观组织观察等分析方法。结果 X80钢在天然海水中的析氢电位约为-940m V(vs.SCE,下同),海水p H为3.5时析氢电位发生正移。其应力腐蚀敏感性与极化电位有很大关系,随着极化电位负移,X80钢的氢脆敏感性增加。天然海水中当极化电位负于-950 m V时,断口出现准解理断裂特征形貌。在-1050 m V极化电位下,钢材进入氢脆断裂区发生脆性断裂。海水p H为3.5时,-900 m V钢材有发生氢脆的危险。结论与天然海水相比,X80钢在p H为3.5的酸性海水中具有较高的应力腐蚀敏感性,两种海水介质中X80钢的应力腐蚀敏感性均随极化电位负移而增加。     

包装箱用碳纤维增强复合材料贮存寿命研究

目的研究碳纤维增强复合材料贮存条件下的性能变化趋势和寿命评估。方法对碳纤维增强复合材料开展四个不同温度条件下的热氧老化试验,按试验周期定期取样开展冲击性能测试,对试验数据采用寿命预估方法进行处理,对材料性能进行预估。结果通过数据计算分别得到我国热带海洋、干热沙漠等典型气候条件下的碳纤维增强复合材料贮存寿命分别为17.21~35.89年。结论碳纤维增强复合材料具有较好的贮存性能,在较为严酷的热带海洋气候和给定的失效判据条件下,寿命预计为17.21年。试验和数据处理方法可以较好地预计材料的性能变化趋势和开展寿命评估。