A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Removal of mixed contaminants by Fe0-based biobarrier in flow-through columns using recycled waste materials

The present study investigated the reactivity and ability of permeable reactive barriers [zero-valent iron (ZVI)-barrier plus biobarrier) to remove various contaminants (Cd, As, Zn, Cu, Mn, Cr, NO₃ ⁻, NH₄ ⁺, and COD_cr) from synthetic leachate. Two different reactive materials were used in this study, namely ZVI and autoclaved lightweight concrete (ALC). After 90 days of column operation, the contaminant profiles were determined along the length of the columns. The heavy metals were extensively removed in the bio-ALC and sequential barriers (ZVI plus bio-ALC), however the removal efficiencies for the heavy metals Zn and Cr in the ALC and bio-ALC barriers were comparatively low. Nitrate was completely removed (>99.9%) in the ALC, bio-ALC, and sequential barriers. More than 50% of the produced ammonium and organic materials were removed in the biologically reactive zone of the sequential barriers. The results of the present study suggest that sequential barriers are one of the best solutions for in situ remediation and that they can be applied to clean up the leachate released from landfills.     

Aquatic toxicity of cartap and cypermethrin to different life stages of Daphnia magna and Oryzias latipes

Cartap and cypermethrin, which are among the most widely used pesticides in many countries, are considered safe because of their low mammalian toxicity and their low persistence in the environment. However, recent findings of endocrine-disrupting effects and developmental neurotoxicity have raised concerns about the potential ecological impacts of these pesticides. We evaluated the aquatic toxicity of cartap [S,S'-(2-dimethylaminotrimethylene) bis(thiocarbamate), unspecified hydrochloride] and cypermethrin [(RS)-alpha-cyano-3-phenoxybenzyl-(1RS,3RS,1RS,3SR)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropane carboxylate], both individually and combined, on different life stages of the freshwater cladoceran Daphnia magna and a freshwater teleost, Japanese medaka (Oryzias latipes). The 96-hr Daphnia median effective concentrations (EC50s) for cartap and cypermethrin were 91.0 microg/L and 0.00061 microg/L, respectively. Rapid recovery of Daphnia was observed after short-term pulsed exposure to cartap and cypermethrin; there were no adverse effects on reproduction or survival 20 d after a 24 hr exposure to cartap up to 1240 microg/L and cypermethrin up to 1.9 microg/L. Chronic continuous exposure (for 21 d) of 7-d-old Daphnia to cypermethrin significantly reduced the intrinsic population growth rate in a concentration-dependent manner. However, because the intrinsic population growth rates were all above zero, populations did not decrease even at the highest experimental concentration of 200 ng/L. Exposure of Daphnia neonates (< 24 hr old) to cypermethrin for 21 d caused significant, sub-lethal reproduction-related problems, such as increased time to first brood, reduced brood size, and reduced total brood number, at 0.0002, 0.002, and 0.2 ng/L cypermethrin, but the intrinsic population growth rate was not significantly affected. Oryzias latipes was relatively more resistant to both pesticides. In particular, embryos appeared to be more resistant than juveniles or adults, which may be partly due to the protective role of the chorion. The incidence of larval fish deformity was significantly higher after a 96 hr exposure to as low as 250 microg/L of cartap or 40 microg/L of cypermethrin. The mixture of both compounds showed no synergistic toxicity. The extremely high acute-to-chronic ratio suggests that the standard acute lethal toxicity assessment might not reflect the true environmental hazards of these frequently used pesticides. Ecological hazard assessments of long-term low dose or pulsed exposures to cartap and cypermethrin may reveal more realistic consequences of these compounds in surface water.     

Techniques for High-Quality Ambient Coarse Particle Mass Measurements

ABSTRACT

Several recent studies have shown associations between ambient concentrations of particle mass (PM) and rates of morbidity and mortality in the general population. These studies have raised the issue of quality of coarse mass (CM, PM between 2.5 and 10 µm) data used for these purposes. CM data may have precision three or more times worse than the associated PM _2.5 or PM₁₀ data, depending on the measurement method, PM _2.5 to PM ₁₀ ratios, and CM concentrations. CM is measured either as the difference between collocated _PM10 and _PM2.5 samplers or more directly with a dichotomous (virtual impactor) sampler. CM precision for the difference method is degraded due to the increased errors inherent with using the difference between two independent measurements, as well as the high PM_2.5 to PM₁₀ ratios (and low CM concentrations) typical of the eastern United States. The dichotomous sampler (dichot) makes a more direct measurement of CM, but there is a potential for significant postexposure loss of particles from unoiled CM dichot filters, as well as uncertainties in the dichot’s CM channel enrichment factor. Compared to the dichot, low-volume inertial impactor samplers such as the Harvard Impactor (HI) or PM2.5 Federal Reference Method (FRM) are simpler to operate and maintain, provide sharper cut points, and do not require oiled filters to prevent loss of CM from the filter during transport. With the recent interest in CM spatial and temporal variability with respect to PM health effects, we have developed modifications to the HI PM method to provide measurements of 24-hour PM with estimated CM precision of better than 5% CV and r² higher than 0.95, primarily by lowering field blank variability and increasing gravimetric analytical precision. These high-precision PM techniques are not limited to the HI sampler; they can also be applied to the _PM2.5 FRM sampler. The measurement methods described here can be applied to future PM studies to avoid the potential problems with exposure assessment caused by CM measurements that have poor precision.     

Reduced sulfur compounds in ambient air surrounding an industrial region in Korea

The atmospheric concentrations of several reduced sulfur compounds (RSCs) including H(2)S, CH(3)SH, DMS, CS(2), and DMDS were measured concurrently from a series of field campaigns covering multiple locations in the surroundings of a large industrial region (August 2004 to September 2005). These field studies have been designed and undertaken to inspect the concentrations of RSCs in ambient air. The RSC concentrations were found to occur in a highly variable range. H(2)S (1.06 +/- 2.07 ppb) was found to be the most abundant RSC followed by CS(2) (0.84 +/- 0.54 ppb), DMDS (0.36 +/- 1.21 ppb), DMS (0.24 +/- 0.83 ppb), and CH(3)SH (0.11 +/- 0.23 ppb). The RSC levels measured at the study area were comparable to those observed previously from other polluted environmental settings. When these RSC data were examined further in terms of spatial (industrial vs. non-industrial sites) and seasonal (summer vs. winter seasons) grouping schemes, differences in their concentration levels were statistically insignificant in most cases. In contrast, there were fairly strong variations in temporal patterns over a diurnal cycle. If these RSC concentration data were converted to diagnose the malodor strengths, their effects were in most cases insignificant with minor contribution towards odor nuisances.     

Background monitoring and long-range transport of atmospheric CFC-11 and CFC-12 at Kosan, Korea

The background concentrations of atmospheric CFC-11 and CFC-12were monitored to assess their impact on stratospheric ozone depletion and global warming from September 1995 to March 1999 at Kosan, Korea, located at eastern margin of the Asian Continent. The concentrations of atmospheric CFC-11 at Kosan have decreased slightly, at a rate of –2.5 pptv yr^-1, over the period in response to the Montreal Protocol. The CFC-12 mixing ratio at Kosan continues to increase in the atmosphere at a rate of 5.7 pptv yr^-1 despite international regulations, because of its extreme atmosphere persistence. Recent trends ofthese two chlorofluorocarbons at Kosan, Korea were concordant with those of the northern hemispheric background monitored unitat Mauna Loa, Hawaii. The maximum seasonal mean mixing ratios of CFC-11 and CFC-12 at Kosan, Korea, were 270±4 pptv inthe spring and 538±9 pptv in the winter, and the corresponding seasonal minima were 267±7 and 529±12 pptv. This occurred in the summer and was due to southeasterlywinds from the northwestern Pacific Ocean. By performing a three-day isentropic backward trajectory analysis, it was shownthat air masses at Kosan, and with the exception of summer, mainly originated from central and northern China. In particular, the mixing ratios of these two contaminant speciesare closely related with their air mass trajectories.     

Continuous high-solids anaerobic co-digestion of organic solid wastes under mesophilic conditions

With increasing concerns over the limited capacity of landfills, conservation of resources, and reduction of CO(2) emissions, high-solids (dry) anaerobic digestion of organic solid waste (OSW) is attracting a great deal of attention these days. In the present work, two dry anaerobic co-digestion systems fed with different mixtures of OSW were continuously operated under mesophilic conditions. Dewatered sludge cake was used as a main seeding source. In reactor (I), which was fed with food waste (FW) and paper waste (PW), hydraulic retention time (HRT) and solid content were controlled to find the maximum treatability. At a fixed solid content of 30% total solids (TS), stable performance was maintained up to an HRT decrease to 40 d. However, the stable performance was not sustained at 30 d HRT, and hence, HRT was increased to 40 d again. In further operation, instead of decreasing HRT, solid content was increased to 40% TS, which was found to be a better option to increase the treatability. The biogas production rate (BPR), CH(4) production yield (MPY) and VS reduction achieved in this condition were 5.0m(3)/m(3)/d, 0.25 m(3) CH(4)/g COD(added), and 80%, respectively. Reactor (II) was fed with FW and livestock waste (LW), and LW content was increased during the operation. Until a 40% LW content increase, reactor (II) exhibited a stable performance. A BPR of 1.7 m(3)/m(3)/d, MPY of 0.26 m(3) CH(4)/g COD(added), and VS reduction of 72% was achieved at 40% LW content. However, when the LW content was increased to 60%, there was a significant performance drop, which was attributed to free ammonia inhibition. The performances in these two reactors were comparable to the ones achieved in the conventional wet digestion and thermophilic dry digestion processes.     

Influence of ship emissions on ozone concentrations around coastal areas during summer season

The influence of ship emissions on ozone (O₃) concentrations in a coastal area (CA) including Busan port, Korea was examined based on a numerical modeling approach during a high O₃ episode. The analysis was performed by two sets of simulation scenarios: (1) with ship emissions (e.g., TOTAL case) and (2) without ship emissions (e.g., BASE case). A process analysis (PA) (the integrated processes rate (IPR) and integrated reaction rate (IRR) analyses) was used to evaluate the relative contributions of individual physical and chemical processes in O₃ production in and around the CA (e.g., sites of Dong Sam (DS) and Dae Yeon (DY)). The model study suggested the possibility that pollutant gases emitted from the ships traversing Busan port can exert a direct impact on the O₃ concentration levels in the CA. Largest impacts of ship emissions on the O₃ concentrations were predicted at the coast (up to 15 ppb) and at inland locations (about 5 ppb) due to both the photochemical production of pollutant gases emitted from the ships and meteorological conditions. From the PA, the photochemical production of O₃ (P(O₃)) due to ship emissions in the CA was found to increase by a mean of 1.5 ppb h^?1 (especially by ≥10 ppb h^?1 at the DS site) during the day.