Performance evaluation of a biotrickling filter treating a mixture of oxygenated VOCs during intermittent loading

Laboratory scale-studies on the biodegradation of a 1:1:1 weight mixture of three oxygenated volatile organic compounds (VOCs), ethanol, ethyl acetate, and methyl-ethyl ketone (MEK) in a biotrickling filter (BTF) were carried out using two identically sized columns, filled with different polypropylene rings. The performance of the BTFs was examined for a period of 10 months applying several operational strategies. Similar performance was obtained for both supports. Intermittent flow rate of trickling liquid was shown beneficial to improve the removal efficiency (RE). Continuous feeding of VOC resulted in an excessive accumulation of biomass so high pressure drop was developed in less than 20-30 d of operation. Intermittent VOC loading with night and weekend feed cut-off periods passing dry air, but without addition of water, was shown as a successful operational mode to control the thickness of the biofilm. In this case, operation at high inlet loads (ILs) was extended for more than 75 d maintaining high REs and low pressure drops. Outlet emission concentrations lower than 100 mg Cm(-3) were obtained for ILs up to 100 g Cm(-3)h(-1) working at 15s of empty bed residence time. The most easily biodegradable compounds ethanol and ethyl acetate were used primarily than MEK. After a 3-wk-starvation period, the system performance was almost restored since the first d of operation, being the removal of the less biodegradable compound, MEK, partially deteriorated.     

Biofilms coating Schoenoplectus californicus as indicators of water quality in the Río de la Plata Estuary (Argentina)

N-ethyl-3-carbazolecarboxaldehyde-3-thio- semicarbazone (ECCT) as an new analytical reagent used for the development of a highly sensitive extractive spectrophotometric method for the determination of copper(II). The ECCT forms a greenish-yellow colored 1:1 (M:L) complex with copper(II) at pH 3.0, which is well extracted into n-butanol and shows maximum absorbance at 380nm. The color of the complex is stable for more than forty eight hours. The system obey Beer's law in the range 0.4–3.6 with 2.243 × 10⁴lmol⁻¹cm⁻¹, 2.83 × 10^-3μgcm⁻² molar absorptivity and Sandell's sensitivity respectively. The regression coefficient is 0.412 with 0.99 correlation coefficient. The precision and accuracy of the method was checked by finding the relative standard deviation (0.422%). This developed method has been successfully employed for the determination of copper(II) in environmental and pharmaceutical samples. The method is evaluated by analyzing samples from the bureau of analyzed samples (BCS 233, 266, 216/1, 207 and 179) and by inter comparison of experimental values using AAS.     

Application of manure and compost to contaminated soils and its effect on zinc accumulation by Solanum nigrum inoculated with arbuscular mycorrhizal fungi

Zn accumulation in Solanum nigrum grown in naturally contaminated soil in the presence of different types of organic amendments was assessed. Under the same conditions, the response of the plant to inoculation with two different isolates of arbuscular mycorrhizal fungi (AMF) (Glomus claroideum and Glomus intraradices) was also evaluated. S. nigrum grown in the non-amended soil always presented higher Zn accumulation in the tissues, with the addition of amendments inducing reductions of up to 80 and 40%, for manure and compost, respectively, and enhancing plant biomass yields. The establishment of S. nigrum in the Zn contaminated soil combined with the application of amendments led to a 70-80% reduction in the amount of Zn leached through the soil. The use of S. nigrum in combination with manure appeared as an effective method for reducing the effects of soil contamination, diminishing Zn transfer to other environmental compartments via percolation.     

EDDS and EDTA-enhanced zinc accumulation by Solanum nigrum inoculated with arbuscular mycorrhizal fungi grown in contaminated soil

The effect of two different chelating agents [EDTA and EDDS (S,S-ethylenediaminedissucinic acid)] on Zn tissue accumulation in Solanum nigrum L. grown in a naturally contaminated soil was assessed. Under those conditions, the response of the plant to the inoculation with two different isolates of arbuscular mycorrhizal fungi (AMF)--Glomus claroideum and Glomus intraradices--was also studied. Plants grown in the local contaminated soil (Zn levels of 433mg kg(-1)) accumulated up to 1191mg kg(-1) of Zn in the roots, 3747mg kg(-1) in the stems and 3409mg kg(-1) in the leaves. S. nigrum plants grown in the same soil spiked with extra Zn (Zn levels of 964mg kg(-1)) accumulated up to 4735, 8267 and 7948mg Zn kg(-1) in the leaves, stems and roots, respectively. The addition of EDTA promoted an increase in the concentration of Zn accumulated by S. nigrum of up to 231% in the leaves, 93% in the stems and 81% in the roots, while EDDS application enhanced the accumulation in leaves, stems and roots up to 140, 124 and 104%, respectively. In the stems, the presence of Zn was predominantly detected in the cortex collenchyma cells, the starch sheath and the internal phloem and xylem parenchyma, and the addition of chelating agents did not seem to have an effect on the localisation of accumulation sites. The devise of a chelate-enhanced phytoextraction strategy, using chelating agents and AMF, is discussed.     

Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry

The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels, hazardous products, etc.), by the type of country where it was established (developed, emerging or developing) and the existing conformity assessment mechanism (prohibition, licenses, certification, labeling, etc.). Beyond identifying tendencies in specific industrial sectors, the notifications studied here reach more than 100 chemical products, substances, preparations and other materials, which are subject to various levels of restrictions in different parts of the globe because of their composition or adverse reactions during their life cycles.     

The Power of Innovation and Strategic Sustainability Positioning: A Survey of the Mining Sector in Brazil

This study investigates the relationship between the power of innovation and the sustainability strategies of companies involved in the minerals extraction sector in Brazil. The study included companies associated with the Brazilian Mining Institute, and it used research surveys to gather data. Analysis of the survey data revealed that companies with highly intensive characteristics in regard to innovation and environmental activities (environmental management activities) also display offensive, or proactive, strategies for pursuing sustainability.     

Three-dimensional data interpolation for environmental purpose: lead in contaminated soils in southern Brazil

Monitoring of heavy metal contamination plume in soils can be helpful in establishing strategies to minimize its hazardous impacts to the environment. The objective of this study was to apply a new approach of visualization, based on tridimensional (3D) images, of pseudo-total (extracted with concentrated acids) and exchangeable (extracted with 0.5 mol L^?1 Ca(NO₃)₂) lead (Pb) concentrations in soils of a mining and metallurgy area to determine the spatial distribution of this pollutant and to estimate the most contaminated soil volumes. Tridimensional images were obtained after interpolation of Pb concentrations of 171 soil samples (57 points × 3 depths) with regularized spline with tension in a 3D function version. The tridimensional visualization showed great potential of use in environmental studies and allowed to determine the spatial 3D distribution of Pb contamination plume in the area and to establish relationships with soil characteristics, landscape, and pollution sources. The most contaminated soil volumes (10,001 to 52,000 mg Pb kg^?1) occurred near the metallurgy factory. The main contamination sources were attributed to atmospheric emissions of particulate Pb through chimneys. The large soil volume estimated to be removed to industrial landfills or co-processing evidenced the difficulties related to this practice as a remediation strategy.