Propagation and extinction of dust flames in narrow channels

This article has investigated the propagation and extinction of aluminum dust cloud flame in a narrow channel. The burned and burning dust particles act as heat sources and the channel walls act as heat sinks. In this method, discrete heat source has been used to analyze dust combustion in a narrow channel. Using the superposition of sources and sinks, the preheat zone temperature is predicted as an indicator of flame propagation or extinction. Dust concentration and channel width are two major parameters which affect the quenching distance and flame propagating speed. Wall temperature affects the heat loss; and by preheating the walls, quenching distance is reduced and flame propagation speed is increased.     

Exposure to Methyl Methacrylate and Its Subjective Symptoms Among Dental Technicians,Tehran, Iran

Exposure to methyl methacrylate (MMA), total dust and health symptoms were investigated in 20 dental laboratories located in Tehran, Iran. Time-weighted average (TWA) of MMA and peak concentrations were determined, using XAD-2 tubes followed by GC-ID analysis. Total dusts were evaluated gravimetrically. Health symptoms were asked using a questionnaire. TWA for technicians with direct and indirect exposure to MMA were 327.28 ± 79.42 and 282.9 ± 41.84 mg/m³ , respectively. Peak concentration of MMA for those technicians were 337.0 ± 36.81 and 328.88 ± 45.40 mg/m³, respectively.

There were no significant differences between TWA of MMA and peak concentration in different weekly workdays; however, within-day variations were observed (P < .05).

TWA of MMA and peak concentration correlation with the laboratory volume were 0.61-0.65. Dust exposure of technicians was 2.35 ± 2.70 mg/m³. Cough and skin dryness were the common health symptoms. Smoking and asbestos exposure history were factors influencing cough prevalence (p < .05).

It is concluded that the current Short-Term Exposure Limit (STEL) is not low enough to protect technicians against the adverse effects caused by MMA.     

Inbreeding and the evolution of sociality in arthropods

Animals have evolved strategies to optimally balance costs and benefits of inbreeding. In social species, these adaptations can have a considerable impact on the structure, the organization, and the functioning of groups. Here, we consider how selection for inbreeding avoidance fashions the social behavior of arthropods, a phylum exhibiting an unparalleled richness of social lifestyles. We first examine life histories and parental investment patterns determining whether individuals should actively avoid or prefer inbreeding. Next, we illustrate the diversity of inbreeding avoidance mechanisms in arthropods, from the dispersal of individuals to the rejection of kin during mate choice and the production of unisexual broods by females. Then, we address the particular case of haplodiploid insects. Finally, we discuss how inbreeding may drive and shape the evolution of arthropods societies along two theoretical pathways.     

An equal sex ratio followed by differential sex mortality causes overestimation of females in gall midges: no evidence for sex ratio regulation

Monogeny, the production of unisexual broods by individual females, has been recognized for nearly 80?years. The genetic nature of gall midges' sex determination predicts an equal numbers of male-producing and female-producing females in the populations such that the overall sex ratio is expected to be nearly 1:1. However, observations of some strictly monogenous populations with biased sex ratio, mainly toward females, have raised the question of whether gall midges are able to adjust their offspring sex ratio in response to changes in environmental conditions, and some authors have even considered sex ratio regulation as a strong force in the course of the evolution of monogeny. In this paper, first, by studying the sex ratio variations of the predatory gall midge, Aphidoletes aphidimyza within a generation, we showed that adult males emerge up to 1?day earlier and have shorter life span than females (less than 4?days and up to 6?days, respectively). Although, the sex ratio of A. aphidimyza at the time of emergence was nearly 1:1 (52.41?% males), a simple population simulation indicated that the differential mortality of sexes can lead to a female-biased sex ratio estimation (57.88?% females) under random sampling in the natural environments. Our results imply that the primary sex ratio of monogenous gall midges is nearly 1:1 and that the arrhenogenic/thelygenic gall midges are not able to alter the number of their male/female progenies in response to changes in environmental conditions.     

Stand-alone PV-hydrogen energy system in Taleghan-Iran using HOMER software: optimization and techno-economic analysis

One of the most attractive features of hydrogen as an energy carrier is that it can be produced from water. Hydrogen has the highest energy content per unit mass as compared to chemical fuel and can be substituted. Its burning process is non-polluting, and it can be used in the fuel cells to produce both electricity and useful heat. Photovoltaic arrays can be used in supplying the water electrolysis systems by their energy requirements. During the daylight hours, the sunlight on the photovoltaic array converts into electrical energy which can be used for electrolyzer. The hydrogen produced by the electrolyzer is compressed and stored in hydrogen vessel and provides energy for the fuel cell to meet the load when the solar energy is insufficient. This study investigates a stand-alone power system that consists of PV array as power supply and electrolyzer. They have been integrated and worked at the Taleghan renewable energies’ site in Iran. The National Renewable Energy Laboratory’s Hybrid Optimization Model for Electric Renewables simulation software has been used to carry out the optimal design and techno-economic viability of the energy system. The simulation results demonstrate that energy system is composed of 10-kW PV array, 3.5-kW electrolyzer, 0.4-kW proton exchange membrane fuel cell, 2.5-kW inverter, and 60 batteries (100 Ah and 12 V). The total initial capital cost, net present cost, and cost of electricity produced from this energy system are 193,563 US$, 237,509 US$, and 3.35 US$/kWh, respectively.     

Mango performance as affected by the soil application of zeolite and biochar under water salinity stresses

This study was carried out during two consecutive seasons, 2020 and 2021, on 12-year-old mango (Mangifera indica L.). cv. Ewaise grown in region Idku, El Beheira Governorate, Egypt. The trees were planted at 5?×?4 m apart and grafted on “Sokary” root stock to study the influence of zeolite and biochar on growth, yield, and fruit quality of “Ewaise” mango cultivar irrigated by agricultural drainage water. The trees were treated by the following treatments: zeolite or biochar solely at 1, 2, and 3 kg for tree and their different combinations such as 1 kg zeolite?+?1 kg biochar; 1 kg zeolite?+?2 kg biochar; 1 kg zeolite?+?3 kg biochar; 2 kg zeolite?+?1 kg biochar; 2 kg zeolite?+?2 kg biochar; 2 kg zeolite?+?3 kg biochar; 3 kg zeolite?+?1 kg biochar; 3 kg zeolite?+?2 kg biochar; and 3 kg zeolite?+?3 kg biochar as well as control zero soil application. The obtained results showed that the soil application of zeolite or biochar gave a positive effect on improving the soil characteristics which reflects on the tree trunk thickness, shoot length and thickness, number of inflorescences, yield in kg per tree, and fruit quality. The greatest positive effect on the previous mentioned parameters was obtained by the combined application of the soil application of 2 kg zeolite?+?3 kg biochar; 2 kg zeolite?+?2 kg biochar; 3 kg zeolite?+?2 kg biochar; and 3 kg zeolite?+?3 kg biochar over the rest-applied treatments or control in the two seasons.

     

Optimization of metal bio-acid leaching from mobile phone printed circuit boards using natural organic acids and H2O2

Journal of Material Cycles and Waste Management - With increased popularity and technological innovation, more and more electric and electronic equipment wastes (e-wastes) are being generated....     

Design and optimization of new La1−xCexNi1−yFeyO3 (x,y = 0–0.4) nano catalysts in dry reforming of methane

The paper reports the production of syngas from dry reforming of methane (DRM) over La_1?xCe_xNi_1?yFe_yO₃ (x, y = 0–0.4) perovskites. A series of La_1?xCe_xNi_1?yFe_yO₃ were designed by central composite design (CCD) and synthesized by a sol–gel auto combustion method. Artificial neural network (ANN) approach was used to determine the relationship between preparation and operational parameters on the performance of the catalysts in the DRM process. Nickel mole fraction, lanthanum mole fraction, calcination temperature, and reaction temperature were considered as input variables, and conversion of methane was considered as the output variable. An ANN model with nine neurons in the hidden layer was the suitable in predicting conversion of methane. The genetic algorithm (GA) was subsequently used to determine the optimal preparation condition for enhancing the conversion of methane. La_0.6Ce_0.4Ni_0.99Fe_0.01O₃ catalyst, calcined at 756°C was obtained to be the most active catalyst owing to the optimal composition of nickel and lanthanum in the catalyst formulation.     

Benzene removal by nano magnetic particles under continuous condition from aqueous solutions

Benzene removal evaluated using Fe304 nano continuous condition. A 44 initial benzene concentration, from aqueous solutions was magnetic particles （NM） in factorial design including NM dose, contact time and pH was investigated in 16 experiments （Taguchi OA design）. The results indicated that all factors were significant and the optimum condition was： pH 8, NM dose of 2000 mg.L-1, benzene concentrations of 100 mg.L-1 and contact time of 14min. The maximum benzene uptake and distribution ratio in the optimum situation were 49.4mg.g-1 and 38.4L.g-1, respectively. The nano particles were shown to capture 98.7% of the benzene in optimum batch condition and 94.5% in continuous condition. The isotherm data proved that the Bmnauer-Emmett-Teller model fit more closely and produced an isotherm constant （b） less than one, indicating favorable adsorption. Regeneration studies verified that the benzene adsorbed by the NM could be easily desorbed by temperature, and thereby, NM can be employed repeatedly in water and wastewater management.