The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Exposure to methyl methacrylate and its subjective symptoms among dental technicians, Tehran, Iran.

Exposure to methyl methacrylate (MMA), total dust and health symptoms were investigated in 20 dental laboratories located in Tehran, Iran. Time-weighted average (TWA) of MMA and peak concentrations were determined, using XAD-2 tubes followed by GC-FID analysis. Total dusts were evaluated gravimetrically. Health symptoms were asked using a questionnaire. TWA for technicians with direct and indirect exposure to MMA were 327.28 +/- 79.42 and 282.9 +/- 41.84 mg/m3, respectively. Peak concentration of MMA for those technicians were 337.0 +/- 36.81 and 328.88 +/- 45.40 mg/m3, respectively. There were no significant differences between TWA of MMA and peak concentration in different weekly workdays; however, within-day variations were observed (P < .05). TWA of MMA and peak concentration correlation with the laboratory volume were 0.61-0.65. Dust exposure of technicians was 2.35 +/- 2.70 mg/m3. Cough and skin dryness were the common health symptoms. Smoking and asbestos exposure history were factors influencing cough prevalence (p < .05). It is concluded that the current Short-Term Exposure Limit (STEL) is not low enough to protect technicians against the adverse effects caused by MMA.     

Metal pollution assessment of sediment and water in the Shur River

Intensified industrialization and human activities have resulted in the release of various contaminants into the environment. Among them, heavy metals are often present as a result of mining, milling and industrial manufacturing. In the present investigation, bulk concentrations Pb, Cd, Zn, Cu, Fe, Ca and Al in Shur River (Iran) bed sediments and water around the Sarcheshmeh copper mine were measured from several sample locations. In addition, partitioning was assessed to determine the proportions of metals in different forms. The degree of sediment contamination was evaluated using an Enrichment Factor (EF) and geo-accumulation index (I (geo)) and a newly developed pollution index (I (POLL)). Elevated metals in sediment and water were found to be correlated with areas of the river that were proximal to direct and indirect mining activities. Cadmium and Zn showed the highest pollution index. Cluster analysis was performed in order to assess heavy metal interactions between water and sediment. Chemical partitioning studies revealed that organic metallic bonds were not significantly present in the sediment of the Shur River.     

Designing a developed model for assessing the disaster induced vulnerability value in educational centers

To date, the models developed for assessing the vulnerability of societies have only taken account of the economic problems in the societies. Offering a model based on analytical hierarchy process and failure mode and effect analysis logic, the current study aims to determine the factors influencing the vulnerability of a higher education center and finally defines a vulnerability index. This model divides the factors influencing vulnerability into three categories: (1) the structure and layout of the buildings, (2) the occupants’ characteristics, (3) the controlling and warning systems. The academy community center of Science and Research Branch was assessed in terms of vulnerability. The findings indicated that the vulnerability value relating to various sections and university buildings was higher than the acceptable level which entailed the due attention of educational managers. The findings showed that if some parts of the educational and administrative buildings were used for laboratory as well as for the storage of hazardous and flammable materials, then the vulnerability value will be increased to 200. This highlights the impact that the type of buildings application has on the level of vulnerability. The study has been performed in the Science and Research Branch as an educational center in Tehran during 2009–2010.     

Exposure to Methyl Methacrylate and Its Subjective Symptoms Among Dental Technicians,Tehran, Iran

Exposure to methyl methacrylate (MMA), total dust and health symptoms were investigated in 20 dental laboratories located in Tehran, Iran. Time-weighted average (TWA) of MMA and peak concentrations were determined, using XAD-2 tubes followed by GC-ID analysis. Total dusts were evaluated gravimetrically. Health symptoms were asked using a questionnaire. TWA for technicians with direct and indirect exposure to MMA were 327.28 ± 79.42 and 282.9 ± 41.84 mg/m³ , respectively. Peak concentration of MMA for those technicians were 337.0 ± 36.81 and 328.88 ± 45.40 mg/m³, respectively.

There were no significant differences between TWA of MMA and peak concentration in different weekly workdays; however, within-day variations were observed (P < .05).

TWA of MMA and peak concentration correlation with the laboratory volume were 0.61-0.65. Dust exposure of technicians was 2.35 ± 2.70 mg/m³. Cough and skin dryness were the common health symptoms. Smoking and asbestos exposure history were factors influencing cough prevalence (p < .05).

It is concluded that the current Short-Term Exposure Limit (STEL) is not low enough to protect technicians against the adverse effects caused by MMA.     

Fetal nucleated red blood cells from CVS washings: an aid to development of first trimester non-invasive prenatal diagnosis

Fetal nucleated red blood cells (n-rbc) occur in the maternal circulation from 7 weeks of pregnancy. The enrichment of these cells from maternal blood will depend upon their stage of differentiation, which changes during development. We characterised the fetal n-rbc from chorionic villus sample (CVS) washings and used them to model first trimester non-invasive prenatal diagnosis. The ratio of ε- to γ-globin-producing cells declined rapidly from 10 to 13 weeks, as did the ratio of nucleated to non-nucleated rbc. By 13 weeks the great majority of cells containing γ- or ε-globin are anucleate. The fetal n-rbc were highly variable in size and density and sedimented over a wide density range with a high proportion (>80%) at a density overlapping with that of maternal rbc. We have devised an enrichment procedure using Orskoff lysis to differentially lyse the maternal cells followed by density centrifugation and separation using magnetic beads. This simple protocol allowed recovery of 70% (69±22%) of fetal cells when added at approximately 10 fetal cells/ml maternal blood. When 1 fetal cell/ml millilitre maternal blood was added (total volume 10 ml) the recovery was more variable but remained at approximately 70% (72±47%), with at least one fetal cell recovered in all cases. Copyright © 2001 John Wiley & Sons, Ltd.     

Trace Metals in Upland Headwater Lakes in Ireland

Trace elements (n = 23) in Irish headwater lakes (n = 126) were investigated to determine their ambient concentrations, fractionation (total, dissolved, and non-labile), and geochemical controls. Lakes were generally located in remote upland, acid-sensitive regions along the coastal margins of the country. Total trace metal concentrations were low, within the range of natural pristine surface waters; however, some lakes (~20 %) had inorganic labile aluminum and manganese at levels potentially harmful to aquatic organisms. Redundancy analysis indicated that geochemical weathering was the dominant controlling factor for total metals, compared with acidity for dissolved metals. In addition, many metals were positively correlated with dissolved organic carbon indicating their affinity (or complexation) with humic substances (e.g., aluminum, iron, mercury, lead). However, a number of trace metals (e.g., aluminum, mercury, zinc) were correlated with anthropogenic acidic deposition (i.e., non-marine sulfate), suggesting atmospheric sources or elevated leaching owing to acidic deposition. As transboundary air pollution continues to decline, significant changes in the cycling of trace metals is anticipated.     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.     

Industrial solid waste management through the application of multi-criteria decision-making analysis: a case study of Shamsabad industrial complexes

Industrial towns, as major bases of small and medium production centers, have played a major role in the industrial development of several countries. These towns have paved a way for the prosperity of economic plans and have been able to meet up with the production perspectives of investors, thereby providing the necessary fundamental services. In this regard, paying attention to proper management of waste production is quite important both in the preservation of the environment from industrial pollution and reduction of probable risks threatening the employees of industrial units located in the towns. Therefore, the present research determined the stream of the industrial waste production in Shamsabad Industrial Town, by designing four appropriate disposal scenarios according to the quality of the produced wastes, and assesses them technically, economically and environmentally using two methods of analysis: analytic hierarchical process and analytic network process. The fourth scenario, which consisted of landfilling, incineration and recycling, was ultimately selected as the best disposal scenario. Indeed, the main objective of current paper is to develop a model which could be implemented in other industrial towns, to proper management of generated wastes.