The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

An experimental study on the influence of zeolite on changes of pH and alkalinity in anaerobic treatment of compost leachate

With the increase of urbanization, municipal solid waste has also increased. Therefore, the need for solid waste management is also increasing compared with earlier decades. Composting is a good option for the recycling of solid waste; however, it produces leachate, which requires proper treatment systems to prevent environmental degradation. Due to high chemical oxygen demand (COD) concentrations in compost leachate, anaerobic treatment is the best option for handling the effluent, and an anaerobic baffled reactor (ABR) is one such anaerobic reactor that can be used for its treatment. Because of high ammonia and heavy metal concentrations, as well as the possibility of sludge washout in ABRs, it is important to use proper media, such as zeolite, which can reduce inhibition effects and sludge washout from the reactor. Anaerobic treatment, especially during the methanogenesis phase, is sensitive, and pH and alkalinity are parameters that influence the treatment. Therefore, adjusting these parameters within a normal range is very important to the proper functioning of anaerobic systems. In this study, a pilot‐scale ABR was used, and the last 4 of the 8 ABR compartments were filled with zeolite. The bioreactor was operated at hydraulic retention times (HRT) of 3, 4, and 5 days, with zeolite filling ratios of 10%, 20%, and 30%, and influent COD concentrations of 10,000, 20,000, and 30,000 milligrams per liter (mg/L). In this study, pH value was 6.43 ± 0.1, 6.96 ± 0.3, and 6.96 ± 0.25 at filling ratios of 10%, 20%, and 30%, respectively. According to the results, in all filling ratios, no significant changes were observed in the pH value when the organic loading rate increased and its amount was within a constant range. Influent alkalinity was equal to 2015 ± 510, 2884 ± 505, and 4154 ± 233 milligrams of calcium carbonate per liter (mg CaCO₃/L) at influent COD concentrations of 10,000, 20,000, and 30,000 mg/L, respectively, and in effluent, they were 2536 ± 336, 3379 ± 639, and 4377 ± 325 mg CaCO₃/L, respectively. The amount of alkalinity in the effluent increased compared with the alkalinity in the influent. The results show that the amount of alkalinity in the influent and effluent was similar, and the alkalinity enhancement was lower when the filling ratio was increased from 10% to 20%, and 20% to 30%. Comparisons of the results from zeolite with and without biofilm showed that, in cases of zeolite with biofilm, the amounts of silica and oxygen decreased and the amount of carbon increased, and it showed the formation of biofilm on the surface of zeolite. In addition, the absence of sodium in the zeolite with the biofilm indicated that sodium was exchanged with ammonium ions. According to the results, zeolite can be used in anaerobic reactors as a medium, and it also reduces fluctuations in pH and alkalinity at different organic loading rates, providing a normal range for anaerobic treatment.     

Optimization of a methodology for the simultaneous determination of deltamethrin,permethrin and malathion in stored wheat samples using dispersive liquid–liquid microextraction with solidification of floating organic drop and HPLC-UV

The purpose of this study was to investigate common pesticides in stored wheat at Kermanshah province's silos in Iran. A simple, inexpensive, reliable and environmentally friendly method based on dispersive liquid–liquid microextraction with solidification of floating organic drop was developed. The analytical characteristics of the method were determined. Also, various parameters such as the materials of the silos, types of ownerships of the silos, geographic orientation of silo locations and climatic conditions of silo locations on pesticide residues in studied wheat samples were investigated. Among all the studied parameters, the climatic conditions of silo locations showed the highest influence on pesticide residues in wheat samples. Generally, 61.2% of the samples had pesticide levels below the method detection limits and 38.8% of the total samples had at least one of the understudied pesticides. Also, 13.9% of the samples had deltamethrin residues, 16.7% of the samples had permethrin, 22.2% of the samples had malathion, 11.1% of the samples had both permethrin and malathion and 2.8% of the samples had both deltamethrin and malathion. The results revealed that the residues of deltamethrin and malathion were lower than the standard level announced by European Union regulation and only three samples contained permethrin higher than Europe standard level.     

Response surface analysis of effects of hydraulic retention time and influent feed concentration on performance of an UASFF bioreactor

The interactive effects of hydraulic retention time (HRT) and influent chemical oxygen demand (COD_in) on the performance of an up-flow anaerobic sludge fixed film (UASFF) bioreactor treating palm oil mill effluent (POME) was studied. Anaerobic digestion of POME was modeled and analyzed with two variables i.e. HRT and COD_in. Experiments were conducted based on a general factorial design and analyzed using response surface methodology (RSM). The region of exploration for digestion of POME was taken as the area enclosed by HRT (1–6 days) and COD_in (5260–34,725 mg/l) boundaries. Eight dependent parameters were either directly measured or calculated as response. Increase in the variables resulted in decrease in COD removal efficiency, solid retention time (SRT) and sludge retention factor (SRF) and increase of COD removal rate, volatile fatty acid to alkalinity ratio (VFA/Alk), CO₂ percentage in biogas and methane production rate. The value of the maximum specific microbial growth rate (μ_m) determined through the equation that correlated organic loading rate (OLR) and μ (calculated by quadratic model for SRF) was found to be 0.153 d^?1. This value was close to that obtained using Chen and Hashimoto kinetic equation (0.207 d^?1) in a previous study. The present study provides valuable information about interrelations of quality and process parameters in POME digestion using a UASFF bioreactor.     

Multivariate statistical evaluation of heavy metals in the urine of opium individuals in comparison with healthy people in Western Iran

Environmental Science and Pollution Research - The current study aimed to evaluate the levels of some toxic and essential elements (Pb, Cd, Cu, Ti, Ni, Cr, Co, Fe, Ca, Hg, Mn, Se, and Zn) in the...