In-use polybrominated diphenyl ether (PBDE) stocks and atmospheric emissions in Japan

We estimated the in-use stocks of polybrominated diphenyl ethers (PBDEs) in Japan using a population balance model. The estimation is based on the domestic demand of PBDEs and the assumed survival rate of these products. Two cases relevant to the future regulation of commercial deca-BDE are considered, namely (1) deca-BDE declines at the same rate as the current rate of decline, and (2) deca-BDE is discontinued after 2020. The estimates of the decreasing rates of in-use penta-, octa-, and deca-BDE stocks were proportional with the measured decreases in the atmospheric concentrations of these substances. The in-use penta- and octa-BDE stocks could be depleted in the near future (500 and 60 tonne in 2013, and an estimated 20 and <1 tonne in 2020, respectively). Relevant to case 1, the in-use stocks of deca-BDE-containing products would be 28,000 tonne in 2013 and an estimated 1900 tonne in 2040, providing an ongoing source of deca-BDE emission to the environment. On the other hand, relevant to case 2, most of the deca-BDE would be phased out by 2040. The atmospheric emissions of deca-BDE were predicted at 84–841 kg/year in 2013 and an estimated 43–425 kg/year in 2020.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Demonstration study of high temperature melting for asbestos-containing waste (ACW)

The service life of many buildings and houses built using asbestos-containing materials is coming to an end and their demolition will lead to a great deal of asbestos-containing waste (ACW). Conventionally, the disposal of such waste is conducted by isolation under controlled landfill procedures; however problems with this method exist, such as the risk at the time of re-utilization of landfill sites and the depletion of lands to be reclaimed. Melting treatment is a promising technology that could be used to solve these problems; a thermal process involving temperatures exceeding the melting points of asbestos, it transforms them into non-hazardous minerals. This technology may be applicable not only for friable ACW but also for nonfriable ACW. We performed a demonstration test of melting treatment of nonfriable ACW using a gasification and melting furnace of the shaft furnace type, which is a typical method for high temperature melting. Detailed observation using transmission electron microscopy as well as general analyses verified that the same level of asbestos remained in the slag obtained by high temperature melting as that of the background soil. In addition, the asbestos concentration in the exhaust gas and the dust from the facility were at sufficiently low levels, and it was thus verified that the asbestos concentration in the atmosphere in the vicinity of the facility during the melting treatment was comparable to that of Japan’s background level reported by the Ministry of the Environment in 2007.     

Advanced sensing technology in environmental field

Before the introduction of advanced sensing technology in environmental fields, environmental issues were discussed as several categories, such as local environmental issues in the 1970s, global environmental issues in the 1980s, living environmental issues in the 2000s and environmental stress issues in near future, which are of increasing interest in Japan. Using advanced sensing technologies, such as electrochemical sensors, chemically-sensitive field-effect transistors (ChemFETs) based on micro-electro mechanical system (MEMS) micromachining technology and subsequently electrophoretic separation and microfluidic Lab-on-a-Chip using MEMS technology, we have steered several kinds of environmental monitoring projects timely in response to the environmental issues for over the last 25 years. Among the local environmental issues, the global environmental issues and the living environmental issues, some fruits of R&D project will be introduced. Finally, our latest concern of the environmental stress monitoring was discussed and preliminary results were also introduced.     

Rare earth element content in various waste ashes and the potential risk to Japanese soils.

Selected chemical characteristics of rare earth elements (REEs) in 89 waste ash samples, including food scrap ashes (FSA), animal waste ashes (AWA), horticulture waste ashes (HWA), sewage sludge ashes (SSA) and incinerator bottom ashes (IBA), were examined in this study. The results showed that Y, La, Ce, Pr, Nd, Dy, Yb, Ho, Er, Tm, Lu in the waste ash samples were normally distributed, but Sc, Sm, Eu, Gd, Tb were not. Average REE concentrations followed the sequence of Ce > La = Y> Sc>Nd>Sm>Pr>Gd>Dy>Eu>Tb>Er> Yb>Ho>Lu>Tm. Of the five types of waste ashes, total REE contents (sigmaREE) ranged from 54 to 130 mg/kg, following the sequence of SSA>HWA>IBA>AWA>FSA; individual REE concentrations were within 0.04-20, 0.1-29, 0.2-33, 0.1-44 and 0.01-41 mg/kg for FSA, AWA, HWA, SSA and IBA, respectively. Crust-normalized REE patterns indicated that SSA was enriched with Sc, Sm, Eu, Gd, Tb and slightly enriched with La, Ce; IBA was enriched with Eu, Tb and slightly with La, Y, Ce; FSA was slightly enriched with Sm, Eu, Tb; REEs were not found to be elevated in HWA and AWA. Comparison of REE content in the waste ashes and in six principal Japanese agricultural soils indicated that application of FSA, AWA and HWA to agricultural land will cause no REE problem, but continuous application of SSA or IBA may cause Sc, Sm or Eu accumulation in some of the soils.     

Consumer perspectives on household hazardous waste management in Japan

We give an overview of the management systems of household hazardous waste (HHW) in Japan and discuss the management systems and their risks. To get basic information, we conducted a survey of consumers to discover their behavior and awareness of HHW items throughout the entire life cycle, which is made up of the purchase, use, and disposal of a product. The results showed that many people hold end-of-life batteries, fluorescent lamps, empty spray cans, and others in their houses after use. Also, the results showed that a lot of such waste items were discarded in waste streams different from those stipulated by local governments. In particular, many people do not remove NiCd batteries inside products such as shavers or cordless phones before discarding. On the other hand, people’s knowledge of and concern regarding the risks, collection, and recycling of HHW were high. When information about the risks was specifically presented in the questionnaire, people tended to show a more positive intention to participate in a collection and recycling system compared to those who were not presented with such information. Our studies on NiCd batteries and fluorescent lamps showed that it is important to collect and recycle HHW to control the domestic and international flows of cadmium and mercury.     

Design optimization and standardization of an environmental availability test under both acidic and alkaline conditions

The objective of this study was to design a procedure for an environmental availability test under both acidic and alkaline conditions for solid wastes and recycled materials and products. The procedure was designed on the basis of the Dutch availability test NEN 7371. Bottom ash from a municipal solid waste incinerator and copper slag were used as test materials. The influences of the type and intensity of liquid stirring apparatus and the open area ratio of the top of the leaching vessel were investigated experimentally, and partial least-squares modeling was applied as multivariate data analysis for the simultaneous evaluation of the three leaching conditions. Interlaboratory validation was then carried out with the participation of seven laboratories in accordance with JIS Z 8402-2/ISO 5725-2. Both repeatability and reproducibility were found to be acceptable, but precise calibration of the pH electrode is required. The proposed procedure will provide sufficient accuracy as a standard test method.     

Chemical and bioassay monitoring of PCB-contaminated soil remediation using solvent extraction technology

Illegal dumping of polychlorinated biphenyl (PCB) capacitors was discovered in Kobe, Japan, in 2001, leaving about 68 m(3) (92 tons) of soil contaminated with approximately 6.6 kg of PCBs. Solvent extraction technology carried out in 2002-2003 using isopropyl alcohol remedied the affected soil at the site. Forty-seven batch treatments were conducted during full-scale treatment. On average, 8.4 extraction cycles per batch were needed to achieve the clean-up goal for PCBs (i.e., the Japanese environmental quality standard for soil). Analytical results showed that the average PCB concentration (88 microg g(-1)-dry soil) in untreated soil samples of all the batches was decreased to 1.2 microg g(-1)-dry soil in treated soil samples, yielding a removal efficiency of 98.6%. Dioxin responsive-chemical activated luciferase gene expression assay (DR-CALUX) and enzyme-linked immunosorbent assay (ELISA) adopting a monoclonal antibody against 2,3',4,4',5-pentachlorobiphenyl (PCB #118) were used to rapidly screen soil samples before and after solvent extraction. The DR-CALUX and ELISA results were in good agreement with World Health Organization toxicity equivalent values and analytically determined PCB concentrations, respectively. Regular monitoring during the treatment period confirmed that the applied technology met Japanese environmental and control regulations concerning treatment and disposal of contaminated soils and treatment residues. After full-scale treatment, the amount of PCBs recovered from the solvent purification system approximated the estimated amount of PCBs spilled.     

Brominated dioxin-like compounds: in vitro assessment in comparison to classical dioxin-like compounds and other polyaromatic compounds

Recently, several countries agreed to adopt the Stockholm convention on persistent organic pollutants (POPs). One future obligation will be to add other POPs as new evidence becomes available. In vitro cell-based bioassays offer a rapid, sensitive, and relatively inexpensive solution to screen possible POP candidates. In the present study, we investigated the aryl hydrocarbon (Ah)-receptor activity of several dioxin-like POPs by using the Micro-EROD (Ethoxy-Resorufin-O-Deethylase) and DR-CALUX (Dioxin-Responsive-Chemical Activated Luciferase gene eXpression) bioassays, which are two state-of-the-art methods. The Micro-EROD system used in our study utilizes a wild-type rat liver cell line (rat liver H4IIEC3/T cells), while the DR-CALUX bioassay consists of a genetically modified rat hepatoma H4IIE cell line that incorporates the firefly luciferase gene coupled to dioxin-responsive elements (DREs) as a reporter gene. In the case of the DR-CALUX bioassay, we used an exposure time of 24 h, whereas we used a 72-h exposure time in the Micro-EROD bioassay. The aim of this study was to compare conventional dioxin-like POPs (such as polychlorinated dibenzodioxins and -furans, PCDD/Fs and coplanar polychlorinated biphenyls, PCBs) with several other classes of possible candidates to be added to the current toxicity equivalent factor (TEF) model in the future. Therefore, this study compares in vitro CYP1A1 (Micro-EROD bioassay) and firefly luciferase induction (DR-CALUX bioassay) in several mixed polyhalogenated dibenzodioxins and -furans (PXDD/Fs; X=Br, Cl, or F), alkyl-substituted polyhalogenated dibenzodioxins and -furans (PMCDD/Fs; M=methyl), polyhalogenated biphenyls (PXBs, X=Br, Cl ), polybrominated diphenyl ethers (PBDEs), pentabromophenols (PBPs), and tetrabromobisphenol-A (TBBP-A). We also evaluate congener-specific relative potencies (REPs) and efficacies (% of TCDD(max)) and discuss the dose-response curves of these compounds, as well as the dioxin-like potency of several other Ah-receptor agonists, such as those of the polyaromatic hydrocarbons (PAHs) and polychlorinated naphthalenes (PCNs). The highest REP values were found for several PXDD/F congeners, followed by some coplanar PXBs, trichlorinated PCDD/Fs, PAHs, PBDE-126, 1-6-HxCN, and some brominated flame retardants (TBBP-A). These in vitro investigations indicate that further research is necessary to evaluate more Ah-receptor agonists for dioxin-like potency.