Transformation of phthalates in young landfill cells

Phthalic acid diesters are additives in a variety of materials that can end up in landfills. Leachates from a series of full-scale young landfill cells were analysed over time for dimethyl, diethyl, dibutyl, butylbenzyl, and di(2-ethylhexyl) phthalate (respectively designated DMP, DEP, DBP, BBP, and DEHP), and their corresponding monoesters monomethyl, monoethyl, monobutyl, monobenzyl, and mono(2-ethylhexyl) phthalate (MMP, MEP, MbutP, MbenzP, and MEHP, respectively), as well as o-phthalic acid (PA). One landfill cell was created in each of three consecutive years by deposition of the same type of waste in July and August. The pH, volatile fatty acids (VFAs), and total organic carbon (TOC) were measured to characterise development of the degradation phases in three landfill cells, which revealed early acidogenic to initial methanogenic stages. Analysis of the phthalate compounds showed that observed concentrations of the degradation products were below the detection limit in the acidogenic leachates but exceeded concentrations of their corresponding diesters in leachates from cells in the initial methanogenic phase. Maximum and average concentrations of phthalic acid were 50 and 23 mg/l, respectively, and the corresponding values for the other phthalates were 430 and 27 microg/l. The concentrations of all phthalates decreased during the establishment of stable methanogenic conditions.     

Landfill mining: a critical review of two decades of research

Landfills have historically been seen as the ultimate solution for storing waste at minimum cost. It is now a well-known fact that such deposits have related implications such as long-term methane emissions, local pollution concerns, settling issues and limitations on urban development. Landfill mining has been suggested as a strategy to address such problems, and in principle means the excavation, processing, treatment and/or recycling of deposited materials. This study involves a literature review on landfill mining covering a meta-analysis of the main trends, objectives, topics and findings in 39 research papers published during the period 1988-2008. The results show that, so far, landfill mining has primarily been seen as a way to solve traditional management issues related to landfills such as lack of landfill space and local pollution concerns. Although most initiatives have involved some recovery of deposited resources, mainly cover soil and in some cases waste fuel, recycling efforts have often been largely secondary. Typically, simple soil excavation and screening equipment have therefore been applied, often demonstrating moderate performance in obtaining marketable recyclables. Several worldwide changes and recent research findings indicate the emergence of a new perspective on landfills as reservoirs for resource extraction. Although the potential of this approach appears significant, it is argued that facilitating implementation involves a number of research challenges in terms of technology innovation, clarifying the conditions for realization and developing standardized frameworks for evaluating economic and environmental performance from a systems perspective. In order to address these challenges, a combination of applied and theoretical research is required.     

Frontal impact dummy kinematics in oblique frontal collisions: evaluation against post mortem human subject test data

OBJECTIVE: Today, a predominant percentage of vehicles involved in car crashes are exposed to oblique or frontal offset collisions. The aim of this study is to evaluate the 50th percentile male Hybrid III, THOR 99, and THOR Alpha dummies by comparing them with the corresponding kinematics of post mortem human subjects (PMHS) in this type of collision. METHODS: The PMHS data include results from oblique frontal collision tests. They include sled tests with near-side and far-side belt geometries at 15 degrees , 30 degrees , and 45 degrees angles. The test subjects were restrained with a three-point lap-shoulder belt and the Delta V was 30 km/h. RESULTS: The results from the Hybrid III and THOR 99 tests showed that, in most of the test, the head trajectories were an average of approximately 0.1 m shorter than those from equivalent PMHS. The Hybrid III and THOR 99 far-side belt geometry tests showed that the belt remained in place longer on the shoulder of the Hybrid III than on the THOR 99 and the THOR Alpha. This was probably due to a stiffer lumbar spine in the Hybrid III and to a large groove in the steel of the superior surface of the Hybrid III shoulder structure. The THOR 99 escaped from the shoulder belt about 40-50 ms earlier than the THOR Alpha. The results from the THOR Alpha tests show that the head trajectory accorded fairly well with the PMHS data, as long as the shoulder belt did not slip off the shoulder. Although the THOR Alpha shoulder escaped the shoulder belt in the 45 degrees far-side belt geometry, the PMHS did not. This may be due to the THOR Alpha shoulder design, with approximately 0.05 m smaller superior and medial shoulder range-of-motion, in combination with a relatively soft lumbar spine. CONCLUSIONS: The THOR Alpha provides head trajectories similar to those of the PMHS under these loading conditions, provided the shoulder belt remains in position on the shoulder. When the shoulder belt slipped off the dummy shoulder, the head kinematics was altered. The shoulder range-of-motion may be a contributing factor to the overall kinematics of an occupant in oblique frontal impact situations where the occupant moves in a trajectory at an angle from that of the longitudinal direction of the car.     

Screening of environmental pressure from products in the Swedish railway infrastructure: Implications for strategic environmental management

This paper proposes a method to be used in environmental reviews as an initial tool for estimating upstream environmental pressures from material use in organisations dealing mostly with construction materials. Upstream environmental pressures are often omitted in environmental reviews from organisations and instead tend to be site specific, with a limited life-cycle perspective. This paper uses the Swedish National Rail Authority as a case to present the approach. An energy indicator is used to estimate the environmental pressure of material use.In the studied building project, a small set of products contribute to a major part of the material use and the material-related energy use. The energy use is almost exclusively of nonrenewable energy carriers. The three most important products are all homogenous and non-complex, which makes the energy indicator well suited for the analysis. The organisation can use the results to focus on the most important products and also to see which parts of the organisation contribute to the material-related energy use. Rail traffic in Sweden is almost exclusively from non-fossil-based energy carriers. This highlights the importance of the infrastructure to the overall environmental pressure of the railway. Consequently, if road transport were to shift away from fossil fuels, railways earlier environmental advantages would diminish, since research suggests that railway infrastructure is more energy intensive than road infrastructure.     

Mate choice tactics and swarm size: a model and a test in a dance fly

In the dance flyEmpis borealis (L.) (Diptera: Empididae) females gather to swarm and males visit swarms for mating. A model was constructed, based on previously published data, simulating how males may choose among females of different sizes in swarms of different sizes. The focal question was, what influences the number of individuals in the swarm in this and possibly other swarming insects? The relationships between original swarm size and both the number of males arriving per minute and the proportion of males mating are both logarithmic. The model predicted that if these relationships were linear, or if males were able to judge absolute female size, the mean swarm size should increase and be at least four times as large as those found in the field. The only type of male mate choice strategy that gave rise to very large swarms (>25) was size-related choice (if males are able to assess the size of a female in relation to the entire population and not merely to the swarm). Furthermore, no swarming behaviour would occur if males mate independently of swarm size. Thus, the numbers of females attending a given swarm site are influenced by male arrival pattern, male preference for larger swarms, the inability of males to judge the absolute body size of females, and female polyandry. Males searching for mates seem to prefer larger swarms than females searching for a swarm to join, but the mean swarm size is primarily set by the swarm size preference of females. Optimal swarm size predicted from the model was 4.68±0.53 females. In order to test model predictions, 69 natural swarm sites were studied during one season. The mean swarm size was 4.85±4.54 females (median 4.03), and about 90% of swarms consisted of 11 females or fewer. Predicted and observed swarm size did not differ significantly.     

Margins of agricultural fields as habitats for pollinating insects

The occurrence of pollinating insects in field margins with different vegetation was studied in field experiments. Some margins were widened and vegetation was established by sowing of leguminous plants or was allowed to invade spontaneously. The communities of pollinating insects in reclaimed field margins were compared with those of a margin with a naturally diverse flora and an adjacent pasture. A beehive was placed in the area and the collection of pollen by the honey-bees was followed over the season in order to compare the bees' preferences with the supply of flowering plants available in the different experimental field margins. The sown leguminous plants were very attractive to most insect groups, especially bees and bumble-bees, and their pollen constituted an important part of the bees' total catch. The vegetation established by spontaneous succession especially attracted Syrphidae and other groups of Diptera. Butterflies were found in all vegetation types. It is concluded that small areas with flowering plants can give highly positive effects. The key question is how to avoid weed problems and keep the most attractive plant species with a minimum of cost and effort.     

Offspring recognition and the influence of clutch size on nest fostering among male sand gobies, Pomatoschistus minutus

When parental care is costly, parents should avoid caring for unrelated young. Therefore, it is an advantage to discriminate between related and unrelated offspring so that parents can make informed decisions about parental care. In the present study, we test the hypothesis that male sand gobies (Pomatoschistus minutus) recognize and differentially care for their own offspring when given a choice between a nest with sired eggs and a second nest with eggs sired by an unrelated male. The sand goby is a species with exclusive and costly paternal care. Male parasitic spawnings (e.g., sneaking) as well as nest takeovers by other males are common. Our results show that nests containing sired eggs were preferred and received significantly more care, as measured by nest building and nest occupancy, than nests with foreign eggs even when males cared for both nests. These findings suggest that males respond to paternity cues and recognize their own clutches. Relative clutch size also had a significant effect on male parental care. When sired clutches were larger than foreign clutches, males preferred to care for their own nest. In the few cases where males chose to take care of foreign nests, the foreign clutch was larger than their own clutch. Taken together, our results provide evidence that both paternity cues and clutch size influence parenting decisions among male sand gobies.     

Consequences of paternal care on pectoral fin allometry in a desert-dwelling fish

Positive static allometry is a scaling relationship where the relative size of traits covaries with adult body size. Traditionally, positive allometry is thought to result from either altered physiological requirements at larger body size or from strongly condition-dependent allocation under sexual selection. Yet, there are no theoretical reasons why positive allometry cannot evolve in fitness-related traits that are solely under the influence of natural selection. We investigated scaling and sexual dimorphism of a naturally selected trait, pectoral fin size, in comparison to a trait important in male–male combat, head width in natural populations of a fish, the desert goby Chlamydogobius eremius. Male desert gobies provide uniparental care and use their pectoral fins to fan the brood (often under hypoxic conditions); hence, larger fins are expected to be more efficient. Male pectoral fins do not appear to fulfil a signalling function in this species. We found that, for both pectoral fin size and head width, males exhibited positive allometric slopes and greater relative trait size (allometric elevation) than females. However, for head width, females also showed positive allometry, albeit to a lesser degree than males. Because fin locomotory function typically does not result in positive allometry, our findings indicate that other naturally selected uses, such as paternal care, can exaggerate trait scaling relationships.     

By-Catch Impacts in Fisheries: Utilizing the IUCN Red List Categories for Enhanced Product Level Assessment in Seafood LCAs

Overexploitation of fish stocks causes concern not only to fisheries managers and conservation biologists, but also engages seafood consumers; more integrated product perspectives would be useful. This could be provided by life cycle assessment (LCA); however, further complements of present LCA methodology are needed to assess seafood production, one being by-catch impacts. We studied the scientific rationale behind using the IUCN Red List of Threatened Species? for assessment of impacts relating to fish species’ vulnerability. For this purpose, the current Red List status of marine fish in Sweden was compared to the advice given in fisheries as well as key life history traits known to indicate sensitivity to high fishing pressure. Further, we quantified the amount of threatened fish (vulnerable, endangered, or critically endangered) that was discarded in demersal trawl fisheries on the Swedish west coast. The results showed that not only did the national Red List of marine fish have a high consistency with advice given in fisheries and indices of vulnerability, the different fishing practices studied were also found to have vastly different amounts of threatened fish discarded per kilo landing. The suggested approach is therefore promising as a carrier of aggregated information on the extent to which seafood production interferes with conservation priorities, in particular for species lacking adequate stock assessment. To enable extensive product comparisons, it is important to increase coverage of fish species by the global IUCN Red List, and to reconsider the appropriate assessment unit (species or stocks) in order to avoid false alarms.     

National Inventory of Landscapes in Sweden (NILS)��scope, design, and experiences from establishing a multiscale biodiversity monitoring system

The landscape-level and multiscale biodiversity monitoring program National Inventory of Landscapes in Sweden (NILS) was launched in 2003. NILS is conducted as a sample-based stratified inventory that acquires data across several spatial scales, which is accomplished by combining aerial photo interpretation with field inventory. A total of 631 sample units are distributed across the land base of Sweden, of which 20% are surveyed each year. By 2007 NILS completed the first 5-year inventory phase. As the reinventory in the second 5-year phase (2008?C2012) proceeds, experiences and insights accumulate and reflections are made on the setup and accomplishment of the monitoring scheme. In this article, the emphasis is placed on background, scope, objectives, design, and experiences of the NILS program. The main objective to collect data for and perform analyses of natural landscape changes, degree of anthropogenic impact, prerequisites for natural biological diversity and ecological processes at landscape scale. Different environmental conditions that can have direct or indirect effects on biological diversity are monitored. The program provides data for national and international policy and offers an infrastructure for other monitoring program and research projects. NILS has attracted significant national and international interest during its relatively short time of existence; the number of stakeholders and cooperation partners steadily increases. This is constructive and strengthens the incentive for the multiscale monitoring approach.