Leaching of zinc from tire wear particles under simulated estuarine conditions

Tire wear particles (TWP) abraded from end-of-life passenger car tires have been added at a concentration of 1 g L⁻¹ to river water, sea water and mixtures thereof in order to examine the chemical controls on the leaching of Zn from the rubber matrix. Results of time-dependent experiments conducted over a period of 5 days were consistent with a diffusion controlled leaching mechanism with rate constants of about 0.04 mg L⁻¹ h^−1/2 in river water and between about 0.02 and 0.03 mg L⁻¹ h^−1/2 in sea water. Additional experiments revealed a reduction in Zn dissolution with both increasing salinity and pH and enhancement of leaching in the presence of fluorescent light compared with dark conditions. In corresponding experiments conducted in the presence of a fixed quantity (0.8 g L⁻¹) of clean, fractionated estuarine sediment, aqueous Zn concentrations were reduced by at least an order of magnitude. Increasing the quantity of sediment resulted in a progressive reduction in Zn concentration until an apparent equilibrium was achieved, with partition coefficients defining the sediment-water distribution of Zn of about 550 mL g⁻¹ and 270 mL g⁻¹ in river water and sea water, respectively. Results are interpreted in terms of the dissolution of ZnO and other residual complexes from the matrix and the subsequent, rapid adsorption of Zn²⁺ ions to coexistent estuarine sediment. The findings of the study are discussed in terms of their implications for the transport, fate and effects of TWP Zn in aquatic environments that are likely to receive urban runoff.     

Achieving attainable outcomes from good science in an untidy world: case studies in land and air pollution

While scientific understanding of environmental issues develops through careful observation, experiment and modelling, the application of such advances in the day to day world is much less clean and tidy. Merseyside in northwest England has an industrial heritage from the earliest days of the industrial revolution. Indeed, the chemical industry was borne here. Land contamination issues are rife, as are problems with air quality. Through the examination of one case study for each topic, the practicalities of applied science are explored. An integrated, multidisciplinary response to pollution needs more than a scientific risk assessment. The needs of the various groups (from public to government) involved in the situations must be considered, as well as wider, relevant contexts (from history to European legislation), before a truly integrated response can be generated. However, no such situation exists in isolation and the introduction of environmental investigations and the exploration of suitable, integrated responses will alter the situation in unexpected ways, which must be considered carefully and incorporated in a rolling fashion to enable solutions to continue to be applicable and relevant to the problem being faced. This integrated approach has been tested over many years in Merseyside and found to be a robust approach to ever-changing problems that are well described by the management term, “wicked problems”.     

Evaluation of disinfection techniques in the treatment of advanced primary treated wastewater for Ciudad Juárez, México.

The purpose of this study was to develop and evaluate the effectiveness of alternative disinfection techniques at the bench-scale level using wastewater from Ciudad Juarez, Mexico, as model feed. This paper presents findings on the effectiveness of UV radiation, peracetic acid (PAA), chlorine dioxide (ClO2), and hypochlorous acid (HOCl) as disinfectants for advanced primary treatment (APT) plant effluent. Wastewater samples for bench-scale testing were collected from an agua negra ("black water") ditch that is part of the combined sewer system in Ciudad Juarez. Bench-scale simulations of the APT process used in Ciudad Juarez were run using a jar test apparatus and aluminum sulfate [Al2(SO4)3] as the coagulant. Jar test effluent from the bench system was used for disinfection testing. The Mexican discharge quality standard for total coliforms is 10 000/100 mL. Ultraviolet radiation met this standard at a dose of 47.5 mW-s/cm2. Ultraviolet disinfection proved reliable and effective despite the presence of suspended solids, and UV dose effectiveness expressed as a total coliforms survival ratio was best explained by a linear regression model. The ClO2 dose ranged from 10 to 20 mg/L and was only effective under ambient temperature conditions found during the winter months; PAA disinfection never met Mexican standards. Chlorine disinfection was effective at a dose range of 8 to 10 mg/L on samples collected at low temperature conditions. Since the completion of this research, Ciudad Juarez has discontinued the use of chlorine disinfection because of its high cost and ineffectiveness.     

Transport of atmospheric fine particulate matter: part 1--findings from recent field programs on the extent of regional transport within North America

Air quality field data, collected as part of the fine particulate matter Supersites program and other field measurements programs, have been used to assess the role of aerosol transport, over length scales of approximately 100-1000 km, on fine particulate matter concentrations. Assessment of data from New York, NY; Baltimore, MD; Pittsburgh, PA; Atlanta, GA; Houston, TX; St. Louis, MO; and Fresno, CA, indicates that in virtually all of the regions, transport of aerosol over distances of 100-1000 km has a significant impact on urban particulate matter concentrations and a dominant role in determining rural particulate matter concentrations, though the nature of the regional contributions differs from region to region. This assessment is generally consistent with previous conceptual models of fine particulate matter formation and accumulation in these regions. The nature of the transported aerosol is largely sulfate in Eastern and Midwestern cities and nitrate in the Central Valley of California. In addition to physical transport of aerosol over distances of 100-1000 km, regional transport of aerosol precursors may lead to conditions conducive to large-scale nucleation events. Regional nucleation events have been reported in the East, Midwest, and in California. The events occurred in the morning soon after surface layers coupled with layers aloft, and the events generate ultrafine particles. In some cases, these nucleation events have been correlated with availability of sulfur dioxide and, therefore, may be sulfate formation events.     

Accumulation of Cu and Zn from antifouling paint particles by the marine macroalga,Ulva lactuca

The marine macroalga, Ulva lactuca, has been exposed to different concentrations of antifouling paint particles (4–200 mg L^?1) in the presence of a fixed quantity of clean estuarine sediment and its photosynthetic response and accumulation of Cu and Zn monitored over a period of 2 days. An immediate (<2 h) toxic effect was elicited under all experimental conditions that was quantitatively related to the concentration of contaminated particles present. Likewise, the rate of leaching of both Cu and Zn was correlated with the concentration of paint particles added. Copper accumulation by the alga increased linearly with aqueous Cu concentration, largely through adsorption to the cell surface, but significant accumulation of Zn was not observed. Thus, in coastal environments where boat maintenance is practiced, discarded antifouling paint particles are an important source of Cu, but not Zn, to U. lactuca.     

A national critical loads framework for atmospheric deposition effects assessment: IV. Model selection,applications, and critical loads mapping

The critical loads approach is emerging as an attractive means for evaluating the effects of atmospheric deposition on sensitive terrestrial and aquatic ecosystems. Various approaches are available for modeling ecosystem responses to deposition and for estimating critical load values. These approaches include empirical and statistical relationships, steady-state and simple process models, and integrated-effects models. For any given ecosystem, the most technically sophisticated approach will not necessarily be the most appropriate for all applications; identification of the most useful approach depends upon the degree of accuracy needed and upon data and computational requirements, biogeochemical processes being modeled, approaches used for representing model results on regional bases, and desired degree of spatial and temporal resolution. Different approaches are characterized by different levels of uncertainty. If the limitations of individual approaches are known, the user can determine whether an approach provides a reasonable basis for decision making. Several options, including point maps, grid maps, and ecoregional maps, are available for presenting model results in a regional context. These are discussed using hypothetical examples for choosing populations and damage limits. The research described in this article has been funded by the US Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, Oregon, through contract #68-C8-0006 with ManTech Environmental Technology, Inc., and Interagency Agreement #1824-B014-A7 with the U.S. Department of Energy and at Oak Ridge National Laboratory managed by Martin Marietta Energy Systems, Inc., under Contract DE-AC05-84OR21400 with the US Department of Energy. Environmental Sciences Division Publication No. 3904. It has been subjected to the agency’s peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.     

A national critical loads framework for atmospheric deposition effects assessment: II. Defining assessment end points,indicators, and functional subregions

The United States Environmental Protection Agency, with support from the US Department of Energy and the National Oceanographic and Atmospheric Administration, has been evaluating the feasibility of an effects-based (critical loads) approach to atmospheric pollutant regulation and abatement. The rationale used to develop three of the six steps in a flexible assessment framework (Strickland and others, 1992) is presented along with a discussion of a variety of implementation approaches and their ramifications. The rationale proposes that it is necessary to provide an explicit statement of the condition of the resource that is considered valuable (assessment end point) because: (1) individual ecosystem components may be more or less sensitive to deposition, (2) it is necessary to select indicators of ecosystem condition that can be objectively measured and that reflect changes in the quality of the assessment end point, and (3) acceptable status (i.e., value of indicator and quality of assessment end point at critical load) must be defined. The rationale also stresses the importance of defining the assessment regions and subregions to improve the analysis and understanding of the indicator response to deposition. Subregional definition can be based on a variety of criteria, including informed judgment or quantitative procedures. It also depends on the geographic scale at which exposure and effects models are accurate and on data availability, resolution, and quality. The research described in this article has been funded by the US Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, Oregon, through contract #68-C8-0006 with ManTech Environmental Technology, Inc., and Interagency Agreement #1824-B014-A7 with the US Department of Energy and at Oak Ridge National Laboratory managed by Martin Marietta Energy Systems, Inc., under Contract DE-AC05-84OR21400 with the US Department of Energy. Environmental Sciences Division Publication No. 3903. It has been subjected to the agency’s peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.     

A rationale for coastal wetland restoration through spoil bank management in Louisiana,USA

The rationale and outline of an implementation plan for restoring coastal wetlands in Louisiana is presented. The rationale for the plan is based on reversing the consequences of documented cause-and-effect relationships between wetland loss and hydrologic change. The main feature is to modify the extensive interlocking network of dredged spoil deposits, or spoil banks, by reestablishing a more natural water flow at moderate flow velocity (<5 cm/sec). Guidelines for site selection from thousands of potential sites are proposed. Examples of suitable sites are given for intermediate marshes. These sites exhibit rapid deterioration following partial or complete hydrologic impoundment, implying a strong hydrologic, rather than sedimentological, cause of wetland deterioration. We used an exploratory hydrologic model to guide determination of the amount of spoil bank to be removed. The results from an economic model indicated a very effective cost-benefit ratio. Both models and practical experience with other types of restoration plans, in Louisiana and elsewhere, exhibit an economy of scale, wherein larger projects are more cost effective than smaller projects. However, in contrast to these other projects, spoil bank management may be 100 to 1000 times more cost effective and useful in wetland tracts <1000 ha in size. Modest spoil bank management at numerous small wetland sites appears to offer substantial positive attributes compared to alternative and more intensive management at a few larger wetland sites.