Effects of Fluoride on Agriculture

The effects of atmospheric fluorides on plants are summarized with respect to the level of biological organization at which they occur. The factors that determine the occurrence and degree of these effects are reviewed briefly. A series of economic effects on agriculture is postulated and its possible relationship to the botanical effects of fluorides is discussed.     

Verification of diffusive and pumped samplers for volatile organic compounds using a controlled atmosphere test facility

There is a requirement to verify the performance of sorbent-based passive or active samplers and to extend their use, where possible, to monitor volatile organic compounds (VOCs) that are known to be photochemical ozone pre-cursors or are relevant to the activities of the petrochemical industry. We report measurements of the 14-day diffusive uptake rates for the VOCs: i-butane (2-methyl propane), n-butane, i-pentane (2-methyl butane), n-pentane, n-hexane, benzene, toluene, and m-xylene (at environmental level concentrations) for industry standard axial samplers (Perkin–Elmer-type samplers) containing the sorbents Carbopack-X, -Z, -B or Tenax-TA. We also present data on back-diffusion, blank levels, and storage for the above sorbents, and describe the simultaneous use of the sorbent Carbopack-X for pumped sampling of certain VOCs. The results were obtained by dosing samplers in a controlled atmosphere test facility (CATFAC) operating under well-defined conditions of concentration, nominal temperature of 20 °C, wind speed of 0.5 m s^?1, and relative humidities of 0% and 80%. Field measurements were also obtained to provide supplementary data to support the laboratory study. Results are compared to existing published data, where these are available.     

Modeling the dynamic habitat and breeding population of Southwestern Willow Flycatcher

To aid in the management and conservation of Southwestern Willow Flycatcher (Empidonax traillii extimus, hereafter “Flycatcher”), we developed numerous models of flycatcher breeding habitat at Roosevelt Lake, AZ. For model development and testing, we compiled 10 years of flycatcher territory data that were obtained from intensive fieldwork between 1996 and 2005. We identified riparian vegetation annually in the project area from Landsat Thematic Mapper images, and extracted floodplain features from a digital elevation model. We created a novel class of temporal (i.e., multiyear) variables by characterizing the stability and variability in breeding habitat over a 6-year time interval. We used logistic regression to determine associations between environmental variables and flycatcher territory occurrence, and to test specific hypotheses. We mapped the probability of territory occurrence with a GIS and determined model accuracies with a classification table and a 10-year population database. Environmental features that were associated with breeding flycatchers included floodplain size, proximity to water, and the density, heterogeneity, age and stability of riparian vegetation. Our best model explained 79% of the variability in the flycatcher breeding population at Roosevelt Lake. The majority of predicted flycatcher habitat formed between 1996 and 2004 on an exposed lakebed ～3 years after water levels receded during a prolonged drought. A high correlation between annual reservoir levels and predicted breeding habitat (r = ?0.82) indicates that we can create and manage habitat for conservation purposes. Our predictive models quantify and assess the relative quality of flycatcher breeding habitat remotely, and can be used to evaluate the effectiveness of habitat restoration activities. Numerous techniques we developed can be used to characterize riparian vegetation and patch dynamics directly off of satellite imagery, thereby increasing its utility for conservation purposes.     

Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties

The variation of mechanical properties such as tensile and flexural properties of randomly oriented unsaturated polyester based sisal/carbon fibre reinforced hybrid composites with different fibre weight ratios have been studied. The chemical resistance test of these hybrid composites to various solvents, acids and alkalies were studied. The effect of NaOH treatment of sisal fibres on the tensile, flexural and chemical resistance properties of these sisal/carbon hybrid composites has also been studied. The hybrid composites showed an increase in tensile and flexural properties with increase in the carbon fibre loading. The tensile properties and flexural properties of these hybrid composites have been found to be higher than that of the matrix. Significant improvement in tensile properties and flexural properties of the sisal/carbon hybrid composites has been observed by alkali treatment. The chemical resistance test results showed that these untreated and alkali treated hybrid composites are résistance to all chemicals except carbon tetra chloride. Hand lay-up technique was used for making the composites and tests are carried out by using ASTM methods.     

Appraisal of measurement methods, chemical composition and sources of fine atmospheric particles over six different areas of Northern Belgium

Daily and seasonal variation in the total elemental, organic carbon (OC) and elemental carbon (EC) content and mass of PM_2.5 were studied at industrial, urban, suburban and agricultural/rural areas. Continuous (optical Dustscan, standard tapered element oscillating micro-balance (TEOM), TEOM with filter dynamics measurement system), semi-continuous (Partisol filter-sampling) and non-continuous (Dekati-impactor sampling and gravimetry) methods of PM_2.5 mass monitoring were critically evaluated. The average elemental fraction accounted for 2-6% of the PM_2.5 mass measured by gravimetry. Metals, like K, Mn, Fe, Cu, Zn and Pb were strongly inter-correlated, also frequently with non-metallic elements (P, S, Cl and/or Br) and EC/OC. A high OC/EC ratio (2-9) was generally observed. The total carbon content of PM_2.5 ranged between 3 and 77% (averages: 12-32%), peaking near industrial/heavy trafficked sites. Principal component analysis identified heavy oil burning, ferrous/non-ferrous industry and vehicular emissions as the main sources of metal pollution.     

Natural resistance of rose petals to microbial attack

Petals of red, yellow and white roses (Rosa damascene Mill.) of the family Rosaceae were extracted with (1:1) methylene chloride/methanol and tested for their antimicrobial activities against four species of Gram-positive bacteria (Bacillus cereus, Bacillus subtilis, Micrococcus luteus and Staphylococcus aureus), five species of Gram-negative bacteria (Enterobacter aerogenes, Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa and Serratia marcescens) and five species of fungi (Penicillium notatum, Aspergillus niger, Rhizopus stolonifer, Saccharomyces cerevisiae and Fusarium oxysporum). All of the crude extracts showed a wide range of antimicrobial activities according to the tested organism and rose's type. Micrococcus luteus was found to be the most susceptible bacteria to all crude extracts. Red and yellow petal extracts showed much higher antibacterial activity than the white petals extract. Bacillus subtilis was found to be the least susceptible to all extracts. The fungus, Penicillium notatum was found to be the most susceptible with white petal extract being the most effective. Saccharomyces cerevisiae and Fusarium oxysporum were the least susceptible to all extracts. White roses extract showed much higher antifungal activities against Penicillium notatum than red or yellow roses, therefore, it was subjected to several bioassay guided chromatographic fractionations and purification to isolate the active chemical(s) responsible for the antifungal activity. Chemical structure of the isolated antifungal compounds were identified by spectroscopy techniques and found to be a γ-sitosterol and (Z,Z)-9,12-octadecadienoic acid. Antibacterial activity of the various types of rose extracts were due to complex mixtures of organic compounds which are still under chemical investigation and will be published later.     

TiO₂-based nanoparticles released in water from commercialized sunscreens in a life-cycle perspective: structures and quantities

This work investigates the physical-chemical evolution during artificial aging in water of four commercialized sunscreens containing TiO₂-based nanocomposites. Sunscreens were analyzed in terms of mineralogy and TiO₂ concentration. The residues formed after aging were characterized in size, shape, chemistry and surface properties. The results showed that a significant fraction of nano-TiO₂ residues was released from all sunscreens, despite their heterogeneous behaviors. A stable dispersion of submicronic aggregates of nanoparticles was generated, representing up to 38 w/w% of the amount of sunscreen, and containing up to 30% of the total nano-TiO₂ initially present in the creams. The stability of the dispersion was tested as a function of salt concentration, revealing that in seawater conditions, a major part of these nano-TiO₂ residues will aggregate and sediment. These results were put in perspective with consumption and life cycle of sunscreens to estimate the amount of nano-TiO₂ potentially released into AQUATIC environment.     

A robust simulation–optimization modeling system for effluent trading—a case study of nonpoint source pollution control

In this study, a robust simulation–optimization modeling system (RSOMS) is developed for supporting agricultural nonpoint source (NPS) effluent trading planning. The RSOMS can enhance effluent trading through incorporation of a distributed simulation model and an optimization model within its framework. The modeling system not only can handle uncertainties expressed as probability density functions and interval values but also deal with the variability of the second-stage costs that are above the expected level as well as capture the notion of risk under high-variability situations. A case study is conducted for mitigating agricultural NPS pollution with an effluent trading program in Xiangxi watershed. Compared with non-trading policy, trading scheme can successfully mitigate agricultural NPS pollution with an increased system benefit. Through trading scheme, [213.7, 288.8]?×?10³ kg of TN and [11.8, 30.2]?×?10³ kg of TP emissions from cropped area can be cut down during the planning horizon. The results can help identify desired effluent trading schemes for water quality management with the tradeoff between the system benefit and reliability being balanced and risk aversion being considered.     

Soil carbon and nitrogen dynamics in the first year following herbicide and scalping in a revegetation trial in south-east Queensland,Australia

During revegetation, the maintenance of soil carbon (C) pools and nitrogen (N) availability is considered essential for soil fertility and this study aimed to evaluate contrasting methods of site preparation (herbicide and scalping) with respect to the effects on soil organic matter (SOM) during the critical early establishment phase. Soil total C (TC), total N (TN), hot-water extractable organic C (HWEOC), hot-water extractable total N (HWETN), microbial biomass C and N (MBC and MBN), total inorganic N (TIN) and potentially mineralizable N (PMN) were measured over 53 weeks. MBC and MBN were the only variables affected by herbicide application. Scalping caused an immediate reduction in all variables, and the values remained low without any sign of recovery for the period of the study. The impact of scalping on HWETN and TIN lasted 22 weeks and stabilised afterwards. MBC and MBN were affected by both herbicide and scalping after initial treatment application and remained lower than control during the period of the study but did not decrease over time. While scalping had an inevitable impact on all soil properties that were measured, that impact did not worsen over time, and actually improved plant growth (unpublished data) while reducing site establishment costs. Therefore, it provides a useful alternative for weed control in revegetation projects where it is applied only once at site establishment and where SOM would be expected to recover as canopy closure is obtained and nutrient cycling through litterfall commences.     

Marine organisms as heavy metal bioindicators in the Persian Gulf and the Gulf of Oman

In the present study, cadmium and lead concentrations were compared in barnacles, ghost shrimps, polychaetes, bivalves, and sediment from ten different locations along the intertidal zone of the Persian Gulf and the Gulf of Oman. The results revealed significant differences in the heavy metal concentrations between the organisms with barnacles showing, by far, the highest metal concentrations. The bioaccumulation factor of Cd in different animals follows this pattern with barnacles?>?bivalves?>?polychaetes?>?ghost shrimps, while the pattern for Pb was barnacles?>?polychaetes?>?bivalves?>?ghost shrimps. In most of the stations, sediments showed the lowest lead and cadmium concentrations. Therefore, it is concluded that barnacles with Pb concentrations between 0.17 and 2,016.1 μg/g and Cd concentrations ranging from 0.4 to 147.1 μg/g are the best organisms to be employed in monitoring programs designed to assess pollution with bioavailable metals in the Persian Gulf and the Gulf of Oman.