Characterization of particulate matter and its related metal toxicity in an urban location in South West India

This study reports the quantification of the toxicity of particulate matter (PM)-bound metals and their possible associated risks to human health. For assessment of PM, 24-h samples of PM₁₀ and PM_2.5 were collected by Mini Vol-TAS sampler at an urban site of Pune. Samples were sequentially extracted with ultrapure water and concentrated HNO₃ and analyzed for “soluble” and “total” metals. Factor analysis identified the resuspension of road dust due to traffic, biomass burning, construction activities, and wind-blown dust as possible sources that played an important role for overall pollution throughout the year. Water-soluble proportion was found to be ≤20 % for Cr, Co, Fe, and Al; ≥50 % for Sr, Cd, Ca, and Zn; and a substantial proportion (～25–45 %) for Mn, Ba, K, Na, Ni, Mg, Cu, and Pb metals in PM₁₀. For PM_2.5, the water-soluble proportion was ≤20 % for Fe, Co, Ni, Cr, and Al, while Sr, K, and Cd were mostly soluble (>50 %) and Cu, Ba, Mn, Ca, Zn, Pb, Na, and Mg were substantially soluble (～25–45 %). In the present study, among the toxic metals, Cd and Pb show higher concentration in the soluble fraction and thus represent the higher bioavailability index and especially are harmful to the environment and exposed person. Risk calculations with a simple exposure assessment method showed that the cancer risks of the bioavailable fractions of Cr, Cd and Ni were greater than the standard goal.     

Developments to a landfill processes model following its application to two landfill modelling challenges

The landfill model LDAT simulates the transport and bio-chemical behaviour of the solid, liquid and gas phases of waste contained in a landfill. LDAT was applied to the LMC1 and LMC2 landfill modelling challenges held in 2009 and 2011. These were blind modelling challenges with the model acting in a predictive mode based on limited early time sections of full datasets. The LMC1 challenge dataset was from a 0.34 m deep 0.48 m diameter laboratory test cell, and the LMC2 dataset was from a 55 m × 80 m 8 m deep landfill test cell which formed part of the Dutch sustainable landfill research programme at Landgraaf in the Netherlands. The paper describes developments in LDAT arising directly from the experience of responding to the two challenges, and discusses the model input and output data obtained from a calibration using the full datasets.The developments include the modularisation of the model into a set of linked sub-models, the strategy for converting conventional waste characteristics into model input parameters, the identification of flexible degradation pathways to control the CO₂:CH₄ ratio, and the application of a chemical equilibrium model that includes a stage in which the solid waste components dissolve into the leachate.     

Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies

Municipal solid waste management is a multidisciplinary activity that includes generation, source separation, storage, collection, transfer and transport, processing and recovery, and, last but not least, disposal. The optimization of waste collection, through source separation, is compulsory where a landfill based management must be overcome. In this paper, a few aspects related to the implementation of a Web-GIS based system are analyzed. This approach is critically analyzed referring to the experience of two Italian case studies and two additional extra-European case studies. The first case is one of the best examples of selective collection optimization in Italy. The obtained efficiency is very high: 80% of waste is source separated for recycling purposes. In the second reference case, the local administration is going to be faced with the optimization of waste collection through Web-GIS oriented technologies for the first time. The starting scenario is far from an optimized management of municipal solid waste. The last two case studies concern pilot experiences in China and Malaysia. Each step of the Web-GIS oriented strategy is comparatively discussed referring to typical scenarios of developed and transient economies. The main result is that transient economies are ready to move toward Web oriented tools for MSW management, but this opportunity is not yet well exploited in the sector.     

A game theoretic approach to multimodal communication

Over the last few decades the animal communication community has become increasingly aware that much communication occurs using multiple signals in multiple modalities. The majority of this work has been empirical, with less theoretical work on the advantages conferred by such communication. In the present paper, we ask: Why should animals communicate with multiple signals in multiple modalities? To tackle this question we use game theoretic techniques, and highlight developments in the economic signaling literature that might offer insight into biological problems. We start by establishing a signaling game, and investigate signal honesty under two prevailing paradigms of honest communication – costly signaling and cheap talk. In both paradigms, without further constraint, it is simple to show that anything that can be achieved with multiple signals can be achieved with one. We go on to investigate different sets of possible constraints that may make multiple signals and multimodal signals in particular more likely to evolve. We suggest that constraints on cost functions and bandwidths, orthogonal noise across modalities, strategically distinct modes, multiple qualities, multiple signalers, and multiple audiences, all provide biologically plausible scenarios that theoretically favor multiple and multimodal signaling.     

A Collaborative Effort to Model Plant Response to Acidic Rain

Radish plants were exposed three times per week to simulated acidic rain at pH values of 2.6 to 5.4 over the course of four weeks in trials performed at Argonne, Illinois; Ithaca and Upton, New York; Corvallis, Oregon; Oak Ridge, Tennessee; and Toronto, Canada. Uniform genotype, soil media and planting techniques, treatment procedures, biological measurements, and experimental design were employed. Growth of plants differed among trials as a result of variation in greenhouse environmental conditions according to location and facilities. Larger plants underwent greater absolute but lower relative reductions in biomass after exposure to the higher levels of acidity. A generalized Mitscherlich function was used to model the effects of acidity of simulated rain or dry mass of hypocotyls using data from three laboratories that performed duplicate trials. The remaining data, from three other laboratories that performed only one trial each, were used to test the model. When the laboratory by trial effect was removed (influence of different growth. conditions), lack of fit to the Mitscherlich function was insignificant. Thus, a single mathematical model satisfactorily characterized the relationship between acidity and mean plant response. The pH value associated with a 10 percent reduction in mass was 3.3 ± 0.3 for hypocotyls. No value was estimated for shoots because effects oh shoots were not significant. The results of this study demonstrate that a generalized exposure-response model can be developed in the presence of large variations in environmental conditions when plant culture and exposure to simulated rain are standardized among laboratories.     

Reducing Interference Effects in the Chemiluminescent Measurement of Nitric Oxides from Combustion Systems

Experiments were carried out to determine the relative chemiluminescence quenching efficiencies as a function of third body concentration for each of the common combustion products, H₂O, CO₂, CO, H₂, O₂ and Ar. These results are compared with those of other investigators. The effect of reaction chamber pressure on analyzer response and the development of an analyzer design which incorporates an adjustable sample capillary inlet capable of maintaining a constant molar flow rate of sample gas to the reaction chamber are discussed. The effect of carbon monoxide interference on chemiluminescent NO_x measurement has been isolated and found to be significant. A means of correcting NO, measurements for these CO interference effects is described. Quantification of NO and NO₂ absorption in liquid water in NO_x sampling systems has been made. Recommendations for sample system designs to handle the presence of water in the sample gas are made.     

Automatic Stack Monitoring of a Basic Oxygen Furnace

An AISI Continuous Automatic Stack Monitor was installed at the stack outlet of an electrostatic precipitator which collected fumes from a basic oxygen process. The performance of the monitor was evaluated in a comprehensive long period continuous field study; the output signal was calibrated by simultaneous iso-kinetic filter samples analyzed gravimetrically. Field calibration confirmed results obtained in the laboratory. The device responded promptly to variations in fume concentration which were induced by changing the degree of activation of the fume collector. Concentrations observed in the study ranged from 0.01 to 0.40 g/standard cu ft. This range could be extended to higher and lower values through modifications of the sampling procedures and instrument settings. Data were obtained on both the operation and maintenance of the instrument. Such information will be necessary for instrument manufacturers interested in the production and installation of commercial models.     

Scenario analysis of perspective change to support climate adaptation: lessons from a pilot study on Dutch river management

Climate adaptation is a complex task surrounded by uncertainty. To support climate adaptation policies, a new scenario approach is pursued to explore possible discontinuous future developments of societal perspectives on climate adaptation issues. The scenario approach was tested for a case study on Dutch river management. In a series of scenario development workshops, a select group of stakeholders explored the perspectives on the management of the River Meuse in the past, present, and future. The process was supported by an analytical perspectives mapping tool to illustrate and analyze the development of perspectives over time. The process and analytical tools contributed to insight into the drivers of perspective change for the case study at hand. Moreover, the stakeholders highlighted the potential of the approach for water management policy for creating awareness about the plurality of perspectives and the dynamics of perspective change, monitoring perspectives and perspective change as part of a flexible policy approach, and anticipating on the occurrence of shock events. Further work is required to better represent the social dynamics of perspectives change, to better empirically ground the perspective change model, and to apply integrated water models in the scenario development process to assess water–society interactions.