Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

Sublittoral epifaunal communities at Signy Island,Antarctica. I. The ice-foot zone

Photographs were taken every 0.5 m along three transects of 5.5 m length on shallow rock faces at Signy Island, Antarctica, during the austral summer of 1991/1992. The percentage cover of substratum ranged from 0 to 100% and the colonising communities included representatives of ten phyla. The zone from mean low-water neap level to 1.5 m depth was mostly devoid of organisms as a result of the seasonal formation of the encrusting ice foot. Coralline and macroalgae dominated from 2 to 3 m, and animal groups from 3.5 to 5.5 m. Bryozoans, and to a lesser extent sponges, were the most abundant animal phyla. Within the bryozoans a succession of colonisation of different species was observed, the most abundant two of which occupied >80% of substratum in places. Substratum type seemed to be the main factor influencing community development in the shallow sublittoral at Signy Island, although ice impact prevents community development in the top 1.5 m and limits it over the rest of the transect down to 5.5 m. Depth and profile of substratum also influenced communities within this depth range (particularly taxonomic composition).     

Seasonal fluctuations in sand temperature: effects on the incubation period and mortality of loggerhead sea turtle (<Emphasis Type="Italic">Caretta</Emphasis><Emphasis Type="Italic">caretta</Emphasis>) pre-emergent hatchlings in Minabe,Japan

Incubation period, hatching success, and emergence percentage in loggerhead (Caretta caretta) nests were quantified during the 1993 and 1995 nesting seasons and following incubation seasons in Minabe, Wakayama, Japan. Sand and nest temperatures were also monitored. Over the seasons, daily mean sand temperature at nest depth fluctuated between 18.0°C and 33.3°C, with a steep increase in the second week of July and a peak in late August. Temperatures inside the nest chambers were a few degrees above those of the surrounding sand at the end of incubation. The incubation period ranged from 46 to 82 days. A significant negative correlation was found between mean sand temperature and incubation period. The relationship conformed to the day-degree concept. There was no significant seasonal trend in hatching success, but many pre-emergent hatchlings were found dead in most of the clutches during the warmest part of the season. Emergence percentage was correlated with mean sand temperature calculated for 4 days before emergence, suggesting that mortality may be due to heat. This heat-related mortality is considered to be a common phenomenon at our study site, because the peak in emergences coincides with the peak in high temperatures. These temperature effects on hatchling mortality must be taken into account in estimates of hatchling sex ratios. Because sand temperatures already exceed the optimal thermal range for incubation, this population is vulnerable to even small temperature increases resulting from global warming.     

Funipuncture for fetocide in late termination of pregnancy

The most widely used method for fetocide in late termination of pregnancy for fetal abnormalities (TOPFA) consists of injecting of potassium chloride (KCl) into the fetal heart and is likely to be painful after 22 weeks of gestation. We studied ten consecutive women undergoing TOPFA between 22 and 38 weeks. This technique for fetocide consisted of a single umbilical vein puncture under ultrasound guidance with injections of sufentanil 5 µg followed by KCl 2 g. No electrocardiographic modifications could be observed and maternal plasma potassium levels did not show any significant variation throughout the procedure. Fetal umbilical phlebotomy for fetal analgesia followed by fetocide therefore appears to be a safe procedure for the mother and allows the fetus to die without pain when late termination of pregnancy (TOP) is indicated. Copyright © 2002 John Wiley & Sons, Ltd.     

Preimplantation genetic diagnosis of the fragile X syndrome by use of linked polymorphic markers

Fragile X syndrome is the most common cause of familial mental retardation. The most common mutation is expansion of a triplet (CGG)_n repeat in the 5′ untranslated region of the FMR1 gene on Xq27.3. The expansion is refractory to PCR due to preferential amplification of the smaller allele in heterozygous cells and the high GC content of the repeat and surrounding sequences. Direct detection of the normal parental alleles in preimplantation embryos has been used for preimplantation genetic diagnosis (PGD) of this disorder. However, this approach is only suitable for approximately 63% of couples due to the heterozygosity of the repeat in the normal population. As an alternative we investigated the use of polymorphic markers flanking the mutation to track the normal and premutation carrying maternal chromosomes in preimplantation embryos. Using a panel of 11 polymorphisms, six (CA)_n repeats and five single nucleotide polymorphisms, diagnosis was developed for 90% of referred couples. Multiplex amplification of informative markers was tested in 300 single buccal cells from interested couples with efficiency and allele drop out (ADO) rates ranging from 69% to 96% and 6% to 18%, respectively. Use of this approach is accurate and applicable to a larger number of patients at risk of transmitting fragile X to their offspring. Copyright © 2001 John Wiley & Sons, Ltd.     

Zinc processing in the USA : An analysis of a declining industry

The purpose of this paper is to analyse the recent behaviour of the US zinc processing industry and the impact of US government policies on it. The first section of the paper is a discussion on the basic structure and conditions of the US zinc processing industry since 1950 and how they have changed. The discussion contains a general presentation of the US zinc market, a detailed look at the behaviour of individual primary zinc processing plants in the USA, Canada, Japan and Western Europe and an analysis of US government policies and their impacts on the US zinc industry. The second section of the paper is a discussion of the factors that have contributed to the decline in US zinc processing capacity and the type of government policy that should be followed in response.