In situ assessment of modification of sediment properties by burrowing invertebrates

Benthic organisms can significantly alter the physical properties of marine sediments, but it has hitherto been difficult to assess and quantify the effects of bioturbation. In situ geophysical techniques offer new methods for measuring these effects: measurement of acoustic shear-wave velocity and electrical resistivity allows nondestructive assessment of the properties of the grain framework and pore-fluid matrix, respectively, of the seabed sediment. The influence of burrowing invertebrates on the structural properties of sandy sediments at intertidal locations on the coast of Wales (UK) was investigated during the periol 1986–1987 using these techniques. Three species (Arenicola marina, Corophium arenarium and Lanice conchilega) were selected on the basis of their contrasting styles of burrow construction. All three species produced measurable and significant, although different, changes in bed properties. They modified shear-wave propagation through the bed by changing bed rigidity: while A. marina and C. arenarium decreased rigidity by creating open burrows, L. conchilega increased rigidity by building shell-lined tubes. All produced a decrease in electrical resistivity by altering porosity and/or tortuosity, which implies an increase in permeability; these changes were attributable not only to the presence of the burrows but also to modification of the between-burrow sediment texture and bed properties.     

层次分析法在化工园区安全评价中的应用

本文采用层次分析法对化工园区域的安全水平评价进行了综合分析研究,得到了化工园区安全评价指标的选取、安全指标权重的确定的技术方法.结果表明,为了构建较为全面的化工园区安全水平评价指标体系,可从区域企业安全生产状况、区域规划状况、区域应急资源利用能力、区域社会经济状况四个方面共25个安全评价指标组成评价体系,进而采用层次分析法确定了各指标的权重,计算结果不仅能够反映园区风险的分布状况,而且对整个园区的规划和布局具有较好的决策支持作用.总而言之,将层次分析法用于化学工业园的安全评价是一种新的尝试,对此进行全面的介绍有着一定的工程实际应用价值.     

金属-阻垢剂沉淀反应的影响因素及其机理

考察了阻垢剂种类、浓度、温度、pH值、金属离子种类等因素对金属与阻垢剂沉淀反应的影响，发现在一定浓度范围内，阻垢剂会与钙离子生成沉淀，加大浓度后沉淀会溶解。经过分析发现，这几种阻垢剂与钙离子之间存在化学计量关系。     

The effects of mobile speed camera introduction on road traffic crashes and casualties in a rural county of England

PROBLEM: This study assesses the impact of crash and casualty numbers in correspondence to the introduction of mobile speed cameras in the rural county of Norfolk, England. METHOD: Road traffic accident casualty and crash data were collected for two years before the introduction of cameras and two years subsequently. The casualties and crashes occurring at 29 camera sites were identified and separated from those occurring in the rest of the county. Trends in crashes and casualties, and their severity, were examined graphically and comparisons were made between before and after periods. The regression to the mean effect at individual sites was estimated. RESULTS: After the introduction of cameras, overall crashes declined by 1% and crashes involving fatalities or serious injuries declined by 9% on the roads without cameras. At the camera sites, crashes decreased by 19% and fatal and serious crashes by 44%. The reduction in total crashes was significantly greater than that expected from the effect of regression to the mean in 12 out of 20 sites tested. SUMMARY: The introduction of cameras appears to have resulted in real and measurable reductions in crash risk in this rural county. IMPACT ON INDUSTRY: Our results suggest the deployment of mobile speed cameras is an effective tool for organizations wishing to reduce road traffic casualties in areas where high crash rates have been associated with excessive vehicle speeds.     

碘化阶层孔氧化硅纳米球对水中典型有机氯污染物的吸附性能研究

采用共缩聚法,成功地原位合成了碘改性的阶层多孔氧化硅纳米球（SiO₂-I）,研究了其基于卤键作用对典型有机氯污染物六六六的吸附性能,并考察了改性剂I-硅烷含量和pH值对吸附效果的影响.实验结果表明,该纳米材料对六六六表现出优异的吸附富集性能,吸附速率快,60 min内对六六六的去除率为71.6%,240 min内达到吸附平衡,去除率可达98.3%,最大吸附量为178.6 mg·g^-1;吸附动力学符合拟二级动力学模型;碘物种的加入提高了阶层多孔氧化硅的吸附速率和吸附效率.另外,为了便于纳米吸附材料的分离,本研究对SiO₂-I纳米球进行了磁性化.研究发现,磁性化修饰后,SiO₂-I纳米材料仍然保留对六六六优异的吸附富集性能,240 min时的吸附去除率达90.3%.     

不同碳源模式下酵母菌PNY2013同步脱氮除磷的应用研究

针对首次分离得到的一株具有同步脱氮除磷新功能的热带假丝酵母（Candida tropicalis） PNY2013,通过生理及动力学特征,连续流运行操作及其在含糖类工业废水中的应用3个环节,探讨了不同碳源模式下PNY2013同步脱氮除磷的特性.结果表明：PNY2013以葡萄糖、乙醇及乙酸为唯一碳源时均生长良好,其最大比增长速率μ_max分别为0.1327、0.1252及0.1115 h^-1,其同步脱氮除磷率分别可达100%、80%、100%（NH₄⁺-N）及93%、95%、98%（PO₄^3--P）.3种碳源下PNY2013同步脱氮除磷的最佳条件基本接近为：温度30℃,pH=8.0,溶解氧0~2 mg·L^-1,C/N=200∶5左右.PNY2013同步脱氮除磷的长期连续运行条件下的实验进一步表明,以葡萄糖为碳源条件下,进水NH₄⁺-N及PO₄^3--P浓度分别达400及80 mg·L^-1时,两者去除率均接近100%.与这种超强能力相比,以乙醇及乙酸为碳源条件下,进水NH₄⁺-N及PO₄^3--P浓度分别达100及20 mg·L^-1时,两者的去除率也可达60%~80%（NH₄⁺-N）及40%（PO₄^3--P）,显示出相当的同步脱氮除磷能力.在以模拟制糖废水、淀粉加工废水、啤酒废水、味精废水这4种典型含糖工业废水为碳源条件下,除淀粉加工废水外PNY2013均能有效去除COD、NH₄⁺-N和PO₄^3--P,其中,制糖、啤酒、制药废水中的COD去除率分别可达40%、89%、96%,NH₄⁺-N去除率分别为85%、94%、76%,PO₄^3--P去除率均为90%.即使在40000 mg·L^-1（制糖）及12500 mg·L^-1（啤酒）的高COD条件下,PNY2013也均具有稳定的NH₄⁺-N和PO₄^3--P去除效果,显示出良好的同步脱氮除磷应用前景.     

中国集成电路制造行业VOCs排放特征及控制对策

中国电子信息产业发展迅速,集成电路等电子器件产量不断增加.在集成电路制造的过程中,大量有机溶剂的使用导致VOCs的产生和排放,从而对大气环境造成影响.为掌握集成电路制造行业VOCs的排放特征,系统分析了其工艺流程和产排污环节,分析了行业废气收集和治理现状,通过对典型企业VOCs的排放监测,获得VOCs排放水平;采用排放因子法核算行业VOCs历史排放量,并基于行业排放特征及减排潜力分析,提出了相应的污染防治对策.结果表明：在集成电路制造中,VOCs排放环节主要集中在光刻、清洗、去胶等过程,1 m²集成电路产量约使用87 g有机溶剂,VOCs产生量较大;通过采取高效的VOCs治理技术,集成电路制造行业有组织排放水平较低,平均浓度为2.1 mg·m^-3,但厂界无组织排放浓度相对较高,平均浓度为0.78 mg·m^-3,接近国家标准的排放限值.根据排放量核算结果,2011—2016年中国集成电路制造行业VOCs排放量呈逐年上升的趋势,主要受产量增加而相应污染控制技术水平提升有限的影响,无组织排放量比重大,占排放总量的38.1%~45.1%.     

深圳市秋季大气臭氧立体分布特征

利用大气O₃探测激光雷达在深圳市东部生态区和西部城区同步开展垂直观测,探究了2018年深圳市O₃立体分布在秋季光化学污染活跃期至冬季非活跃期的演变过程.结果表明：光化学反应活跃的10月,东部地面O₃浓度相对于西部地面高出约128%;地面向上至450m,O₃浓度在东部生态区发生快速降低,而在西部城区由于存在“滴定效应”,O₃浓度随高度升高而升高;450m~2km,东、西部O₃浓度均随高度升高而降低,西部城区O₃浓度水平超过东部生态区约30%;2km以上高空,东、西部O₃浓度趋同（70μg/m³）,并保持稳定,为具深圳市秋季O₃污染过程提供了较高的大气背景浓度.高污染期间,深圳市大气边界层内O₃浓度变化较为一致,西部高空的O₃区域传输作用更加显著.秋季至冬季光化学反应逐渐减弱,深圳市O₃浓度的水平和垂直空间差异逐渐减小,冬季的深圳市O₃污染基本受大气背景控制.     

深圳大气PM2.5中水溶性有机物的来源特征

对2017年9月~2018年8月深圳市北部大气PM_2.5中水溶性有机物（WSOM）的质量浓度、质谱及来源结构进行测量和分析.结果表明：PM_2.5的质量浓度为（32.3±18.4）μg/m³,WSOM的质量浓度为（9.4±5.7）μg/m³,占颗粒物总有机物的（77.6%±14.0%）.质谱分析显示,WSOM的氧碳比（O/C）平均值达到（0.57±0.09）,属于二次有机物的O/C值范围,且生物质燃烧排放的离子碎片C₂H₄O₂⁺的丰度显著,说明WSOM的来源中有显著的生物质燃烧排放的有机气溶胶.为了明确WSOM的来源结构,利用正矩阵因子分解法（PMF）模型进行来源解析,发现3个合理因子：高氧化态有机气溶胶（MO-OOA）,低氧化态有机气溶胶（LO-OOA）和生物质燃烧（BBOA）,贡献比例分别为51.7%,31.8%和16.5%.MO-OOA和BBOA贡献浓度均呈现秋冬高、春夏低的季节变化特征,反向轨迹分析显示其与内陆污染传输关系密切.LO-OOA的变化相对稳定,本地源的贡献较大.结合¹⁴C同位素示踪法对秋冬季WSOM样品分析,发现机动车等化石源二次有机物是WSOM的主要来源,贡献比例达到53.9%,需继续加强对化石燃料控制来降低WSOM污染.