The role of bacteria in the heavy metals removal and growth of Sedum alfredii Hance in an aqueous medium

This study was the first attempt to examine the possible role of the naturally occurring rhizospheric bacteria in heavy metal removal by Sedum alfredii Hance, a terrestrial Zn/Cd hyperaccumuluator, from Zn, Cd, Cu and Pb contaminated water using antibiotic ampicillin. Moreover, the toxicity symptom in plants under heavy metal stress expressed as total chlorophyll, chlorophyll a and b content, growth inhibition, root length, and N, P contents were studied, and the possible relationship among them were also discussed. These results indicate that rhizospheric bacteria may play an important role in the uptake of N and P by S. alfredii, and consequently result in the increase of Chlorophyll content in the leaves and plant biomass due to improved photosynthesis. At the same time, root length significantly decreased under the treatment with ampicillin, which suggested that rhizospheric bacteria appeared to protect the roots against heavy metal toxicity. The Pb, Zn, Cu and Cd concentrations in the roots, stems and leaves of S. alfredii were much higher than those exposed to ampicillin. Accordingly, metal concentrations in the contaminated water without ampicillin treatment were lower than those treated with ampicillin. These results suggest that the rhizospheric bacteria may be useful in plant tolerance to heavy metal toxicity, and also accelerate the metal removal from contaminated water.     

Simulation of boundary layer trajectory dispersion sensitivity to soil moisture conditions: MM5 and Noah-based investigation

In this study, the sensitivity of trajectory paths to anomalous soil moisture was analyzed during three different synoptic episodes in June 2006. The MM5 and Noah land surface models were used to simulate the response of the planetary boundary layer. The HYSPLIT model was used for trajectory analysis. It was found that the response in horizontal lower-level wind field was larger at regions where vertical wind velocity changes were also large. In addition, the sensitivity to soil moisture changes was significant and localized where convective activity was well developed and synoptic effects did not dominate. A non-local effect was felt over the rest of the domain where convection was not present since the model atmosphere reacted as a whole to compensate for induced changes in vertical velocity. This finding was supported by the fact that domain averaged vertical velocities changes were of the order of 0.2 cm s^?1 or less at about 650 hPa and about 200 times smaller than modeled local vertical velocity changes. The largest change in horizontal wind field near the surface was found for weak synoptic events on June 11–12 and June 22–23 while the stronger synoptic event of June 17–18 showed smaller differences. These changes in wind field conditions impacted the transport and dispersion of pollutants. To quantify the sensitivity of air quality estimates to soil moisture uncertainty, we have used three well known measures of trajectory differences: the absolute horizontal transport deviation (AHTD), the relative horizontal transport deviation (RHTD) and the absolute vertical transport deviation (AVTD) for an ensemble of 98 trajectories departing from a region well within the computational domain. For the June 11–12 event it was found that for wet and dry soil moisture experiments, AHTD, RHTD, and AVGTD can reach values in the range 60–100 km, 10–20% and 500–900 m at 24 h run time, respectively. For the June 17–18 and June 22–23 events these values of trajectory differences were reduced more than half. These differences in behavior between time periods are largely attributed to the combined effects of synoptic forcing and the sensitivity of planetary boundary layer to soil moisture changes during well developed convection. The implication for air quality studies is that the soil moisture anomaly and related uncertainty in planetary boundary layer response needs to be incorporated in order to construct an ensemble of the most probable scenarios in which pollutants are released and transported throughout a given target region.     

Investigating the tipping point of crop productivity induced by changing climatic variables

Environmental Science and Pollution Research - South Asia is comprised of several countries, including Bangladesh, Pakistan, India, and Sri Lanka, all ranked highly at risk of climatic variability....     

Investigating degradation metabolites and underlying pathway of azo dye “Reactive Black 5” in bioaugmented floating treatment wetlands

Environmental Science and Pollution Research - The direct discharge of azo dyes and/or their metabolites into the environment may exert toxic, mutagenic, and carcinogenic effects on exposed fauna...     

Copper chloride inhibits brush border membrane enzymes,alters antioxidant and metabolic status and damages DNA in rat intestine: a dose-dependent study

Environmental Science and Pollution Research - Copper (Cu) is an extensively used heavy metal and an indispensible micronutrient for living beings. However, Cu is also toxic and exerts multiple...     

Environmental impact and diversity of protease-producing bacteria in areas of leather tannery effluents of Sialkot,Pakistan

Environmental Science and Pollution Research - Massive discharge of wastes produced by the processing of leather so far confers the most important environmental challenge facing the tanneries...     

Effect of Oxidized Starch on Morphology,Rheological and Tensile Properties of Low-Density Polyethylene/Linear Low-Density Polyethylene/Thermoplastic Oxidized Starch Blends

In this work, morphology, rheological and tensile properties of low-density polyethylene/linear low-density polyethylene/thermoplastic oxidized starch (LDPE/LLDPE/TPOS) blends are studied. The blends of LDPE/LLDPE (70/30, w/w) containing 0–20 wt% TPOS in the presence of 3 wt% of PE-grafted maleic anhydride (PE-g-MA) as a compatibilizer are prepared by a twin screw extruder and then converted to appropriate thin films using an extrusion film blowing machine. Scanning electron microscopic images show that there is a relative good dispersion of oxidized starch particles in PE matrices. However, as TPOS content in the blends increases, the starch particle size increases too. The rheological analyses indicate that TPOS can decrease the elasticity and viscosity of the blends. The LDPE/LLDPE/TPOS blends show power-law behavior and as the TPOS content increases the power-law exponent (n) and consistency index (K) decrease. The ultimate tensile strength and elongation at break of the final blend films reduce, when TPOS content increases from 5 to 20 wt%. However, the required mechanical properties for packaging applications are achieved when 10 wt% oxidized starch is added, according to ASTM D4635.     

Recovery of NH 4 + by corn cob produced biochars and its potential application as soil conditioner

NH4^＋ ion, a main pollutant in aquatic systems, not only causes eutrophication in rivers and lakes but also contributes to fish toxicity. In this study, an eco-friendly biosorbent was prepared from the pyrolysis of corn cob, a low-cost agricultural residue. The biochars produced by pyrolysis of corn cob at 400℃ and 600℃ were characterized and investigated as adsorbents for NH4＋ -N from an aqueous solution. The biochars were characterized through elemental analysis, Brunauer-Emmett-Teller-N2 surface area analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. Batch experiments were conducted to investigate the NH4＋ adsorption process of the corn cob biochars. The Freundlich isotherm model fitted the adsorption process better than the Langmuir and Dubinin-Radushkevich isotherm models. Moreover, the adsorption process was well described by a pseudo-second-order kinetic model. Results of thermodynamic analysis suggested that adsorption was a nonspontaneous exothermic process. Biochars produced at 400℃ had higher adsorption capacity than those produced at 600℃ because of the presence of polar functional groups with higher acidity. The exhausted biochar can be potentially used as soil conditioner, which can provide 6.37 kg NH4＋-N-t^-1 （N fertilizer per ton of biochar）.     

Anoxic biodegradation of dimethyl phthalate （DMP） by activated sludge cultures under nitrate-reducing conditions

Worldwide extensive use of plasticized plastics has resulted in phthalates pollution in different environment. Nitrates from industry and agriculture are also widely disseminated in the soils, natural waters and wastewaters. Dimethyl phthalate (DMP) biodegradation by activated sludge cultures under nitrate-reducing conditions was investigated. Under one optimized condition, DMP was biodegraded from 102.20 mg/L to undetectable level in 56 h under anoxic conditions and its reaction fitted well with the first-order kinetics. Using the high-performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC-MS) analysis, mono-methyl phthalate (MMP) and phthalic acid (PA) were detected as the major intermediates of DMP biodegradation. When combined with the determination of chemical oxygen demand (CODCr) removal capacity and pH, DMP was found to be mineralized completely under anoxic conditions. The biodegradation pathway was proposed as DMP → MMP → PA → … → CO2 H2O.The molar ratio of DMP to nitrate consumed was found to be 9.0:1, which agrees well with the theoretical stoichiometric values of DMP biodegradation by nitrate-reducing bacteria. The results of the non-linear simulation showed that the optimum pH and temperature for the degradation were 7.56 and 31.4℃, respectively.     

Production and application of anaerobic granular sludge produced by landfill

Sludge granulation is considered to be the most critical parameter governing successful operation of an upflow anaerobic sludge blanket and expanded granular sludge bed(EGSB)reactors.Pre-granulated seeding sludge could greatly reduce the required start- up time.Two lab-scale and a pilot-scale EGSB reactors were operated to treat Shaoxing Wastewater Treatment Plant(SWWTP) containing wastewater from real engineering printing and dyeing with high pH and sulfate concentration.The microbiological structure and the particle size distribution in aerobic excess sludge,sanitary landfill sludge digested for one year,and the granular sludge of EGSB reactor after 400 d of operation were analyzed through scanning electron microscopy (SEM) and sieves.The lab-scale EGSB reactor seeded with anaerobic sludge after digestion for one year in landfill showed obviously better total chemical oxygen demand (TCOD)removal efficiency than one seeded with aerobic excess sludge after cation polyacrylamide flocculation-concentration and dehydration.The TCOD removed was 470.8 mg/L in pilot scale EGSB reactor at short hydraulic retention time of 15 h.SEM of sludge granules showed that the microbiological structure of the sludge from different sources showed some differences.SEM demonstrated that Methanobacterium sp.was present in the granules of pilot-scale EGSB and the granular sludge produced by landfill contained a mixture of anaerobic/anoxic organisms in abundance.The particle size distribution in EGSB demonstrated that using anaerobic granular sludge produced by sanitary landfill as the seeding granular sludge was feasible.