环保型民用建筑墙体节能工程施工质量监督策略研究

环保型民用建筑墙体节能工程施工的材料、设备、工艺复杂,需要进行建筑施工优化管理和质量监督,从而确保施工进度和工程质量,对环保型民用建筑墙体节能工程施工实施全过程质量控制,加强墙体施工的质量监督和管理。对建筑项目做好工程施工质量的风险预估,结合材料和设备、环境等方面的影响因素进行工程质量技术指导和风险控制。在施工过程中进行质量监督的动态过程控制,按照标准和规范,进行环保型节能建筑墙体施工质量的量化管理,使得建筑施工质量符合规范标准要求。     

Air Pollution in Singapore: Its Multielemental Aspect as Measured by Nuclear Analytical Techniques

Aerosol samples were collected in 1994 in Singapore on two occasions: once in June during the normal meteorological conditions and later in October during a long haze period caused by the heavy forest fire in Indonesia. Filtration and impaction collection methods were used simultaneously so that detailed elemental analysis of bulk as well as of different size fractions could be performed. Accelerator based nuclear analytical techniques such as Particle Induced X-Ray Emission (PIXE), Rutherford Backscattering (RBS) and Nuclear Microscopy (NM) were used for analysis. These techniques are fast, truly multielemental and perfectly suited for routine analysis of a large number of aerosol samples. Typically all samples were analysed for the following 24 elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Mn, Cr, Fe, Co, Ni, Cu, Zn, Ga, As, Br, Rb, Sr and Pb. Detection limits for bulk analysis were generally below ng/m3 and for single particle analysis absolute detectable mass was approximately 10-17 g. Additionally, trace elements such as Cd, Sn, Sb and Ba whose characteristic X-ray lines were normally "obscured" by the lines of other more abundant elements, were detected when analysing by nuclear microscope in single particle mode.Judging by the average concentrations of lead and sulphur which are good indicators of industrial component of air pollution the situation in Singapore is satisfactory. Pb was typically found in concentrations of 5 to 50 ng/m3 and sulphur in concentrations of 1 to 2 µg/m3. These concentrations are well below limits set by the World Health Organisation (1500 ng/m3 and 40 µg/m3, respectively). On the other hand during the haze period the average concentrations of elements like S, K, Ti, V, Mn, Ni, As and Pb were found to be 3 to 6 times higher than usual. Results are presented and discussed.     

高密度电法在原位修复土壤过程中的监控研究

采用高密度电阻率成像法（ERT）对上海市某有机污染场地土壤污染原地修复进行研究，通过持续监测药剂注入前后电阻率的改变来推断药剂和污染物的扩散路径。结果表明，药剂扩散的影响半径介于2 m～4 m之间；其影响深度根据注药点和土壤渗透性差异而有所不同，在16 m处注药的影响深度大于监测深度20 m，ERT技术在监控原位注入修复过程中具有较好的可行性和适用性。     

同时分解法测定水中总氮和总磷

通过实验找到了同时测定水中总氮和总磷的条件,实现了总氮和总磷的同时测定。     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。     

苯胺类化合物含量对还原--偶氮光度法测定硝基苯的影响

通过将硝基苯和苯胺以不同比例混合制作标准曲线，讨论苯胺类化合物含量对还原－偶氮光度法测定硝基苯的影响。     

我国污染源在线监测现状及建议

文章在对国内重点城市污染源在线监测调查研究的基础上 ,分析总结了国内污染源在线监测的经验和教训 ,提出了推进污染源在线监测的建议     

环境监测实验室废液的管理与处理方法

环境监测实验室的废液处理常常被忽视,提出建立有效的废液管理制度的必要性.有针对性地介绍了环境监测实验室中常见废液的处理方法.     

内蒙古某灌域表层土壤六氯环己烷空间分布特征及影响因素

为修复灌区内土壤有机氯农药污染，降低六氯环己烷对土壤环境的危害，对内蒙古某灌域表层土壤进行采样，利用气相色谱测定50个土壤样品中六氯环己烷及其异构体的含量，并利用ArcGIS空间分析技术确定表层土壤中六氯环己烷的分布状况。样本中六氯环己烷的检出率为96%，各样本中六氯环己烷的浓度范围为未检出~23.0 ng/g，平均浓度为4.4 ng/g。4种异构体含量平均值顺序为γ-六氯环己烷>δ-六氯环己烷>β-六氯环己烷>α-六氯环己烷。灌域东北部和西南部残留浓度较高，并由这2个方向向中部地区逐渐递减，表层土壤中的六氯环己烷分布受土壤黏粒量、不同种植种类和灌溉水源的影响较大。虽受人类耕作的影响，但表层土壤中的六氯环己烷污染水平相对较低。     

车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。