清洁生产审核中物料平衡的难点及应用实例

建立物料平衡是清洁生产审核第3阶段（即“审核”阶段）最核心的工作内容,其目的是为了准确分析物料流失和废物产生的原因,建立物料平衡也是产生清洁生产方案（尤其是中高费方案）最主要的方法之一。本文在介绍清洁生产审核中物料平衡的完整工作步骤的基础上,归纳了几点在实际工作中应用物料平衡遇到的难点及要点,实例介绍了物料平衡、能源平衡和水平衡三种常用平衡,为审核工作者提供些许思路参考。     

微电解-生化法处理大蒜废水工程实例

针对大蒜废水特点,采用了铁屑微电解-UASB-接触氧化工艺进行处理.运行结果表明:在设计进水水质、水量范围内,COD、BOD5、氨氮和ss去除率分别为98%、99%、70%和98%,出水各项指标均达到GB 8978--1996<污水综合排放标准>中的一级排放标准,系统运行费用为1.19元/m3.     

Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.     

六个行业熔铅作业防毒工程技术措施综合评价(第一部分)

在对印刷、铁路车辆、电缆压铅、铅蓄电池、铅盐、铅冶炼这六个行业的熔铅作业以及对铅蓄电池和铅盐生产的铅尘作业中防毒工程技术措施调研的基础上,介绍了它们的基本情况。参照收集的国内外资料,采用定性及定量化的方法,对它们的防毒工程技术措施分别从工艺设备、排风罩类型、净化装置等得出优化选择结论,对还存在的问题进行讨论并提出建议。     

PARTIAL AREA HYDROLOGY AND ITS APPLICATION TO WATER RESOURCES1

ABSTRACT: According to a concept known as partial area hydrology, watershed areas are separated into hydrologically active and passive subareas. The literature relating to the development of the partial area concept is reviewed briefly and the relationship of partial area hydrology to geology, soils, and micrometeorology is illustrated. The potential application of partial area hydrology is discussed with respect to present hydrologic techniques, future hydrologic models, urban hydrology, water quality, and water management. Suggestions for identifying and delineating the contributing areas are discussed.     

焦化行业环境风险预测应用

以焦化行业中典型企业——徐州某焦化生产企业年产100万t捣固焦生产线项目为例,采用新的评价体系和数学模式对项目环境风险进行定量的预测评价,在环境风险定量预测方面作出了有益的尝试,对同类焦化行业环境风险预测及防范具有很好的借鉴意义.     

制冷压缩机生产废水处理工程改造实例

某制冷压缩机生产废水处理工程改造项目采用"物化除磷+生物降解+深度处理"组合工艺,处理后的出水达到《城市污水再生利用—城市杂用水水质》(GB/T18920-2002)要求。实践证明,该改造工程具有处理工艺先进、技术参数合理、自动化程度高、系统运行稳定、抗冲击负荷能力强等特点。     

高温炭化法处理工业废盐工程方案研究

针对工业废盐成分复杂、精制难度高的现状,本文提出了一种工业废盐的资源化工程方案,技术经济分析表明,该工程化方案在技术上、经济上能够实现满足投资、运营要求,具备较好的推广前景。     

转化高新技术促进烟气脱硫技术发展

文章综述了国内烟气脱硫技术及设备发展的历程和现状，分析了引进国外全套烟气脱硫技术装置对国内用户所造成的巨大经济压力，提出走转化高新技术发展国内烟气脱硫技术的道路，介绍了国内外脱硫技术与国内技术相结合，在天津市重点工程项目上实施的实例。