煤炭开采行业建设项目竣工环保验收调查重点问题分析

煤炭开采行业建设项目竣工环保验收主要是调查环境保护措施落实情况,以及对环保批文的落实情况,分析各项措施实施的有效性及可能存在的潜在环境影响,并提出切实可行的补救措施和应急措施。结合煤炭开采行业工程特点提出现场调查的要求,并对生态环境影响调查、水环境影响调查、大气环境影响调查、固体废物环境影响调查等重点环节调查验收中需要注意的问题进行详细的分析。     

煤系固体废物与污泥混合用于矿区复垦的试验研究

矿区复垦作为生态恢复的重要手段,在国内外应用中有很多种方法,在此分析了粉煤灰、煤矸石及污泥各自的特点、应用特征,指出单一废物用于复垦存在的缺陷;通过对3种废弃物及其按不同质量比混合后各土样的pH值、电导率、氮（N）、磷（P）、钾（K）等理化指标的测定分析,研究了粉煤灰、煤矸石等煤系固体废物与污水处理厂排放污泥混合用于矿区复垦的可行性。结果表明：不同比例基质pH值、电导率、各配比样的营养标准均可满足植物生长的需要。说明该方法用于矿区生态修复的优势所在。     

全球汞污染回顾与分析

回顾全球所经历的主要汞污染事件,引述国外科研工作者对全球汞污染与汞排放的调查和研究成果,重点介绍金矿开采对环境的污染与危害,揭示造成亚马逊流域汞污染的深层根源。分析今后全球防止汞污染的主要措施：一是主要工业化国家将进一步研究和改善工业领域相关行业的工艺技术水平,趋向无汞产品和无汞工艺,以减少自身的汞污染与排放;其二,发达国家陆续立法禁止汞的自由贸易和出口。发达国家对汞的出口限制将促使发展中国家相关行业（特别是小金矿）采取汞的替代工艺,从而减少全球性汞污染与排放。     

From the Whitehorse Mining Initiative Towards Sustainable Mining: lessons learned

Much debate has taken place within the mineral policy community about whether or not meaningful progress has been made towards more sustainable practices. This paper investigates the changing approaches towards sustainable development undertaken by the Mining Association of Canada (MAC) over a period of approximately 20 years. The analysis begins in the early 1990s when MAC initiated the Whitehorse Mining Initiative (WMI) and concludes in 2010 when the association was operating under a strategy entitled Towards Sustainable Mining (TSM). The goal is to consider the nature of the learning that has taken place towards sustainability within the mineral industry using the case of a leading national mining association. The investigation was undertaken through a literature review as well as key informant interviews with stakeholders affected by the Canadian Mining Industry. Findings suggest that MAC’s approach to sustainable development has shifted from an ambitious and holistic partnership involving a range of stakeholders to a focused, member-specific agenda that addresses a few performance issues. The transition to TSM was based on lessons learned through working with the WMI and subsequent efforts. It reflects broader corporate tendencies to address social and ecological issues through corporate social responsibility initiatives. The implications of these trends suggest that voluntary initiatives in and of themselves should not be expected to replace the comprehensive regulatory responsibilities historically provided by government.     

Measuring mining safety with injury statistics: lost workdays as indicators of risk

PROBLEM: Mining in the United States remains one of the most hazardous industries, despite significant reductions in fatal injury rates over the last century. Coal mine fatality rates, for example, have dropped almost a thousand-fold since their peak in 1908. While incidence rates are very important indicators, lost worktime measures offer an alternative metric for evaluating job safety and health performance. The first objective of this study examined the distributions and summary statistics of all injuries reported to the Mine Safety and Health Administration from 1983 through 2004. Over the period studied (1983-2004), there were 31,515,368 lost workdays associated with mining injuries, for an equivalent of 5,700 person-years lost annually. The second objective addressed the problem of comparing safety program performance in mines for situations where denominator data were lacking. By examining the consequences of injuries, comparisons can be made between disparate operations without the need for denominators. Total risk in the form of lost workday sums can help to distinguish between lower- and higher-risk operations or time periods. METHOD: Our method was to use a beta distribution to model the losses and to compare underground coal mining to underground metal/nonmetal mining from 2000 to 2004. RESULTS: Our results showed the probability of an injury having 10 or more lost workdays was 0.52 for coal mine cases versus 0.35 for metal/nonmetal mine cases. In addition, a comparison of injuries involving continuous mining machines over 2001-2002 versus 2003-2004 showed that the ratio of average losses in the later period to those in the earlier period was approximately 1.08, suggesting increasing risks for such operations. DISCUSSION: This denominator-free safety measure will help the mining industry more effectively identify higher-risk operations and more realistically evaluate their safety improvement programs. IMPACT ON INDUSTRY: Attention to a variety of metrics concerning the performance of a job safety and health program will enhance industry's ability to manage these programs and reduce risk.     

Reducing non-contact electric arc injuries: an investigation of behavioral and organizational issues

PROBLEM: It is estimated that 5 to 10 arc flash explosions occur in electric equipment every day in the United States. In the mining industry the largest single injury category of electrical injuries are caused by non-contact electrical arcs. METHOD: This investigation progressed in two phases: (a) 836 Mine Safety and Health Administration (MSHA) reports of electric arcing incidents that occurred over a period of 11 years were reviewed, and (b) personal interviews were conducted with 32 individuals. A theoretical Safe Job Performance Model guided the study. RESULTS: Behavioral dimensions were identified and included the effect of worker experience, judgment and decision-making ability, behavioral and organizational controls, and safety culture. SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) conducted an investigation of behavioral components associated with arc flash incidents and developed recommendations for interventions based on findings. IMPACT ON INDUSTRY: This study fills a vacuum in electrical training with a focus on the organizational and behavioral aspects of arc flash incidents. The research is cross-cutting in its scope, in that the results apply not only to mining and construction, but many other industries employing electricians. Although the majority of mine electrical injuries are the results of burns from electrical arcs, few miners are aware that such a hazard exists. A safety training program, which includes a video and an instructor's discussion guide, was developed for electricians based on this study's findings. "Arc Flash Awareness" was released in 2007 (DHHS NIOSH Publication No.2007-116D) and is available through 1-800 CDC INFO. Phone: 1-800 232-4636 or email cdcinfo@cdc.gov. It is also available from MSHA at MSHADistribution@dol.gov or 304-256-3257 (DVD-576). Private industry is producing Portuguese and Spanish language translations.     

Mining manganese nodules: Potential economic and environmental effects ag]

This article examines the economic implications of mining or of not mining manganese nodules and summarizes potential ecological consequences. Apart from possible net economic benefits to certain countries, mining the nodules is not regarded as an economic or strategic necessity. It is concluded that expansion of basic research on oceanfloor ecosystems must be granted high priority. It is in the best interest of developed countries to become signatories of the LOS Convention in order to participate in the development of the regulatory framework and to avoid the antagonism of the international community.     

Sustainable development in the mining industry: clarifying the corporate perspective

This paper examines sustainable development in the corporate mining context, and provides some guidelines for mining companies seeking to operate more sustainably. There is now a burgeoning literature that examines sustainable development in the context of minerals and mining, most of which is concerned with sustainability at global and national scales. What is often challenging to ascertain, however, from these numerous perspectives on sustainable mineral extraction, minerals and metals recycling, environmental management, and social performance, is how sustainable development applies to mining companies themselves, and what steps a mine must take in order to improve the sustainability of operations. Since mining processes have the potential to impact a diverse group of environmental entities, and are of interest to a wide range of stakeholder groups, there is ample opportunity for the industry to operate more sustainably. Specifically, with improved planning, implementation of sound environmental management tools and cleaner technologies, extended social responsibility to stakeholder groups, the formation of sustainability partnerships, and improved training, a mine can improve performance in both the environmental and socioeconomic arenas, and thus contribute enormously to sustainable development at the mine level.     

The internationalisation of the Australian mineral industry in the 1990s

Overseas mineral exploration and mining investment by Australian companies increased dramatically from the early 1990s until 1997. In the wake of the Asian economic crisis and lower commodity prices it declined somewhat in 1998 and 1999. Reflecting their international competitiveness, Australian resource companies were actively involved in projects in about eighty nations in 1999. This study assesses the extent of growth in exploration and mining operations, the distribution between large and small companies and the changing regional focus which has been occurring. It also reflects on some of the key influences on this development. These include a strong domestic finance sector, supporting mining services provision, technological competitiveness, a growing attractiveness of offshore locations and increasing structural impediments at home.     

Little by little,inch by inch: Project expansion assessments in the Papua New Guinea mining industry

Social impact assessment (SIA) has traditionally been practiced as an ex-ante predictive tool in the context of regulatory approval by government agencies. This model of SIA developed by Burdge and others is based on ‘greenfields’ development, of a new project going in to areas where there are no, or relatively few, similar types of development. The International Principles of SIA signalled a conceptual shift in the practice of SIA where greater emphasis is placed on the assessment and management of social issues across the life-cycle of developments. In addition forms of cumulative impact assessment have been developed for contexts where more than one project is likely to impact on populations or communities. With these changes to the traditional models of impact assessment there is a need to clarify how and when dedicated phases of ‘assessment’ might be undertaken over the life-cycle of a development. In the context of the mining industry, SIAs are increasingly required by governments for incremental increases in the size or impact of these operations. This paper reviews the development and application of Project Expansion Assessments (PEAs) for two large-scale mining operations in Papua New Guinea. It argues that a different set of assumptions need to underlie the model of IA for such assessments, with more emphasis on trajectories rather than baselines, a critical evaluation and attribution of effects, and the incorporation of adaptive management tools into the process.