Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

Toxicity of pesticides toward human immune cells U-937 and HL-60

Abstract

The industrialization of the agricultural sector has significantly increased the use of chemicals such as pesticides. Therefore, exposure to them is unavoidable, which makes it necessary to assess their safety for humans at actual exposure doses. This paper aims to determine toxicity of three types of pesticides toward human immune cells (HL-60 and U-937): glyphosate (GLY), deltamethrin (DEL), and chlorothalonil (CHL). Cell viability, membrane integrity, inflammation induction, and antioxidant activity were evaluated to determine differences in cellular response to the tested plant protection agents. In experimental models, all tested substances caused increased mortality of cells after only 24?h. Cell membrane damage was recorded under DEL and CHL influences. The largest disintegration of the cell membrane was due to the action of 100?μg/mL DEL for U-937 and CHL at 1?μg/mL for HL-60. GLY at a concentration of 3,600?μg/mL caused significant peroxidation of U-937 cells’ lipids. CHL-induced inflammation in both types of cells tested. DEL and GLY also induced antioxidant activity in cells. These results lead to the conclusion that the tested pesticides act cytotoxically to the cells of the human immune system in doses to which both farmers and consumers are exposed.     

Using long-term data for a reintroduced population to empirically estimate future consequences of inbreeding

Inbreeding depression is an important long-term threat to reintroduced populations. However, the strength of inbreeding depression is difficult to estimate in wild populations because pedigree data are inevitably incomplete and because good data are needed on survival and reproduction. Predicting future population consequences is especially difficult because this also requires projecting future inbreeding levels and their impacts on long-term population dynamics, which are subject to many uncertainties. We illustrate how such projections can be derived through Bayesian state-space modeling methods based on a 26-year data set for North Island Robins (Petroica longipes) reintroduced to Tiritiri Matangi Island in 1992. We used pedigree data to model increases in the average inbreeding level (F ) over time based on kinship of possible breeding pairs and to estimate empirically N_e/N (effective/census population size). We used multiple imputation to model the unknown components of inbreeding coefficients, which allowed us to estimate effects of inbreeding on survival for all 1458 birds in the data set while modeling density dependence and environmental stochasticity. This modeling indicated that inbreeding reduced juvenile survival (1.83 lethal equivalents [SE 0.81]) and may have reduced subsequent adult survival (0.44 lethal equivalents [0.81]) but had no apparent effect on numbers of fledglings produced. Average inbreeding level increased to 0.10 (SE 0.001) as the population grew from 33 (0.3) to 160 (6) individuals over the 25 years, giving a ratio of 0.56 (0.01). Based on a model that also incorporated habitat regeneration, the population was projected to reach a maximum of 331–1144 birds (median 726) in 2130, then to begin a slow decline. Without inbreeding, the population would be expected stabilize at 887–1465 birds (median 1131). Such analysis, therefore, makes it possible to empirically derive the information needed for rational decisions about inbreeding management while accounting for multiple sources of uncertainty.     

Biodegradability of soil water soluble organic carbon extracted from seven di erent soils

Water soluble organic carbon (WSOC) is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WSOC extracted from 7 soils di erently managed. WSOC was extracted from soil with water (soil/water ratio of 1:2, W/V) for 30 min, and then tested for biodegradability by a liquid state respirometric test. Result obtained confirmed the finding that WSOC biodegradability depended on the both land use and management practice. These results suggested the biodegradability test as suitable method to characterize WSOC, and provided useful information to soil fertility.     

Possibilities for the efficient utilisation of spent geothermal waters

Waters located at greater depths usually exhibit high mineral content, which necessitates the use of closed systems, i.e. re-injecting them into the formation after recovering the heat. This significantly reduces investment efficiency owing to the need to drill absorption wells and to perform anti-corrosion and anti-clogging procedures. In this paper, possibilities for the efficient utilisation of cooled geothermal waters are considered, particularly with respect to open or mixed geothermal water installations. Where cooled water desalination technologies are used, this allows the water to be demineralised and used to meet local needs (as drinking water and for leisure purposes). The retentate left as a by-product of the process contains valuable ingredients that can be used for balneological and/or leisure purposes. Thus, the technology for desalinating spent geothermal waters with high mineral content allows improved water management on a local scale and makes it possible to minimise the environmental threat resulting from the need to dump these waters into waterways or surface water bodies and/or inject them into the formation. The paper is concerned with Polish geothermal system and provides information about the parameters of Polish geothermal waters.     

Performance evaluation of two protective treatments on salt-laden limestones and marble after natural and artificial weathering

Salt crystallization is a major damage factor in stone weathering, and the application of inappropriate protective products may amplify its effects. This research focuses on the evaluation of two protective products' performance (organic polydimethylsiloxane and inorganic ammonium oxalate (NH₄)₂(COO)₂·H₂O) in the case of a salt load from behind. Experimental laboratory simulations based on salt crystallization cycles and natural weathering in an urban area were carried out. The effects were monitored over time, applying different methods: weight loss evaluation, colorimetric and water absorption by capillarity measurements, stereomicroscope observations, FTIR and SEM-EDS analyses. The results showed minor impact exerted on the short term on stones, particularly those treated with the water repellent, by atmospheric agents compared to salt crystallization. Lithotypes with low salt load (Gioia marble) underwent minor changes than the heavily salt-laden limestones (Lecce and Ançã stones), which were dramatically damaged when treated with polysiloxane. The results suggest that the ammonium oxalate treatment should be preferred to polysiloxane in the presence of soluble salts, even after desalination procedures which might not completely remove them. In addition, the neo-formed calcium oxalate seemed to effectively protect the stone, improving its resistance against salt crystallization without occluding the pores and limiting the superficial erosion caused by atmospheric agents.     

Determination of bismuth in environmental samples by slurry sampling graphite furnace atomic absorption spectrometry using combined chemical modifiers

Persistence behavior of insecticides chlorpyriphos, profenofos, triazophos, cypermethrin, and deltamethrin following the use of three combination formulations Action 505 (chlorpyriphos?+?cypermethrin), Roket 44EC (profenofos?+?cypermethrin), and Anaconda Plus (triazophos?+?deltamethrin) was studied in cabbage following the spray application at the recommended and double doses. Bio-efficacy of these formulations was also evaluated against mustard aphids (Lipaphis erysimi Kaltenbach) and diamondback moth (Plutella xylostella L.). The residues of different insecticides persisted for 5–8 days at low dose and 8–12 days at high dose. The residues dissipated with time and 87–100 % dissipation was recorded on the 8th day. The half-life values varied from 0.4 to 1.6 days. Based on the acceptable daily intake (ADI) values, a safe waiting period of 1 day has been suggested for the formulations Action 505 and Roket 44EC and 3 days for Anaconda Plus at the recommended dose of application. Action (1.6 L/ha) treatment was found to be the best as it significantly reduced the diamondback moth (DBM) (~60 %) and aphid population (~70 %) besides giving the highest yield (170 % increase over control).     

The New Zealand experience of varroa invasion highlights research opportunities for Australia

The Varroa mite (Varroa destructor) is implicated as a major disease factor in honey bee (Apis mellifera) populations worldwide. Honey bees are extensively relied upon for pollination services, and in countries such as New Zealand and Australia where honey bees have been introduced specifically for commercial pollinator services, the economic effects of any decline in honey bee numbers are predicted to be profound. V. destructor established in New Zealand in 2000 but as yet, Australia remains Varroa-free. Here we analyze the history of V. destructor invasion and spread in New Zealand and discuss the likely long-term impacts. When the mite was discovered in New Zealand, it was considered too well established for eradication to be feasible. Despite control efforts, V. destructor has since spread throughout the country. Today, assessing the impacts of the arrival of V. destructor in this country is compromised by a paucity of data on pollinator communities as they existed prior to invasion. Australia’s Varroa-free status provides a rare and likely brief window of opportunity for the global bee research community to gain understanding of honey bee-native pollinator community dynamics prior to Varroa invasion.     

Polycyclic aromatic hydrocarbon levels in European catfish from the upper Po River basin

Polycyclic aromatic hydrocarbons (PAHs) are a major concern in environmental studies as many of them have been labeled as probable carcinogens by the International Agency for Research on Cancer (IARC 1983). Due to their lipophilic properties and resistance to degradation, PAHs can accumulate in organic tissue. As a consequence, alarming concentrations of these compounds have been found in many aquatic species. The European catfish (Silurus glanis) is a top food chain predator that is considered to be a reliable bio-indicator of environmental pollution. From 2009 to 2011, 54 specimens of S. glanis were captured from four different sites covering the area of the Po River basin (Northern Italy). Fish muscles were analyzed in the laboratory to determine the levels of nine PAHs, namely naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, pyrene, benz[a]anthracene, chrysene, and benz[a]pyrene (BaP), which were detected by high-performance liquid chromatography (HPLC). The total average concentration of PAHs was 26.90?±?49.50 ng g^?1 (min 0.60, max 275.75 ng g^?1). Analysis showed that 9.20 % of the fish muscles exceeded the maximum levels of 2 ng g^?1 set for BaP by European regulations (Commission Regulation (EC), 2006). Values measured for benz[a]pyrene ranged from 0.05 to 8.20 ng g^?1 (mean 1.07?±?1.58 ng g^?1). Chrysene and benz[a]anthracene, both considered potential human carcinogens (PAH2), were found at levels of 4.40 and 0.05 ng g^?1 (mean values), respectively. The highest mean concentration was recorded for anthracene (12.92 ng g^?1), which has been recently included in the list of substances of very high concern (SVHC) as reported by the European Chemicals Agency (ECHA 1–9, 2009).