Isolation and preliminary characterization of a 3-chlorobenzoate degrading bacteria

A study was conducted to compare the diversity of 2-, 3-, and 4-chlorobenzoate degraders in two pristine soils and one contaminated sewage sludge. These samples contained strikingly different populations of mono-chlorobenzoate degraders. Although fewer cultures were isolated in the uncontaminated soils than contaminated one, the ability of microbial populations to mineralize chlorobenzoate was widespread. The 3- and 4-chlorobenzoate degraders were more diverse than the 2-chlorobenzoate degraders. One of the strains isolated from the sewage sludge was obtained. Based on its phenotype, chemotaxonomic properties and 16S rRNA gene, the organism S-7 was classified as Rhodococcus erythropolis. The strain can grow at temperature from 4 to 37℃. It can utilize several （halo）aromatic compounds. Moreover, strain S-7 can grow and use 3-chlorobenzoate as sole carbon source in a temperatures range of 10-30℃ with stoichiometric release of chloride ions. The psychrotolerant ability was significant for bioremediation in low temperature regions. Catechol and chlorocatechol 1,2-dioxygenase activities were present in cell free extracts of the strain, but no （chloro）catechol 2,3- dioxygenase activities was detected. Spectral conversion assays with extracts from R. erythropolis S-7 showed accumulation of a compound with a similar UV spectrum as chloro-cis,cis-muconate from 3-chlorobenzoate. On the basis of these results, we proposed that S-7 degraded 3-chlorobenzoate through the modified ortho-cleave pathway.     

Air quality nearby road traffic tunnel portals： BTEX monitoring

A monitoring campaign of BTEX （benzene, toluene, ethylbenzene, o- m- and p-xylene） was carried out nearby two tunnel portals in the urban area of Naples with the aim to verify air quality in this kind of urban sites. Sampling was carried out using the active adsorption technique. Sampling time was 1 h. Ambient temperature and traffic flow measurements were carried out during each sampling operation. The results indicate that average benzene concentrations at both sites exceed the limit value of 10 μg/Nm^3 established by the European Community （EC） （Dir. 2000/69）. Concentration levels of other BTEX are relatively high as well. A correlation between BTEX concentration and two wheeler vehicle flow was observed.     

Anoxic biodegradation of dimethyl phthalate （DMP） by activated sludge cultures under nitrate-reducing conditions

Worldwide extensive use of plasticized plastics has resulted in phthalates pollution in different environment. Nitrates from industry and agriculture are also widely disseminated in the soils, natural waters and wastewaters. Dimethyl phthalate (DMP) biodegradation by activated sludge cultures under nitrate-reducing conditions was investigated. Under one optimized condition, DMP was biodegraded from 102.20 mg/L to undetectable level in 56 h under anoxic conditions and its reaction fitted well with the first-order kinetics. Using the high-performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC-MS) analysis, mono-methyl phthalate (MMP) and phthalic acid (PA) were detected as the major intermediates of DMP biodegradation. When combined with the determination of chemical oxygen demand (CODCr) removal capacity and pH, DMP was found to be mineralized completely under anoxic conditions. The biodegradation pathway was proposed as DMP → MMP → PA → … → CO2 H2O.The molar ratio of DMP to nitrate consumed was found to be 9.0:1, which agrees well with the theoretical stoichiometric values of DMP biodegradation by nitrate-reducing bacteria. The results of the non-linear simulation showed that the optimum pH and temperature for the degradation were 7.56 and 31.4℃, respectively.     

Decolorization of Blue CL-BR dye by AOPs using bleach wastewater as source of H2O2

This research was focused on the investigation of the efficacy of advanced oxidation processes (Fenton,ozonation and UV/H_2O_2) for decolorization of reactive azo dye (Blue CL-BR) using bleach wastewater as possible source of H_2O_2.All the experiments were performed on the laboratory scale set-up.The results showed that colour removal efficiencies by UV or bleach (H_2O_2) alone were not so efficient.Fenton process with bleach wastewater was found to be the most effective at process conditions such as pH of 3 and H_2O_2/Fe~(2 ) ratio of 24:1,resulting in 64% colour removal.Almost complete colour removal,i.e.,99% and 95% were achieved by UV/H_2O_2 and UVfoleach wastewater in 30 and 60 min,respectively.Ozonation proved an efficient method for decolorization of Blue CL-BR dye at alkaline pH.It was possible to achieve 98% colour removal with 30 min of ozonation at pH 9.The colour removal of dye was found to follow first order kinetics.     

Hydrodynamic characteristics of a four-compartment periodic anaerobic ba ed reactor

Periodic anaerobic baffled reactor (PABR) is a novel reactor based on the design concept of anaerobic baffled reactor (ABR). Residence time distribution (RTD) studies on both clean and working reactors at the same hydraulic residence time (HRT) of 2 d were carried out to investigate the dead spaces and mixing patterns in PABRs at different organic loading rates (OLRs) in various switching manners and frequencies.The results showed that the fraction of dead space in PABR was similar to that in ABR,which was low in comparison with other reactor designs.Dead space may be divided into two categories,hydraulic and biological.In RTD studies without biomass,the hydraulic dead space in the PABR run in an"every second"switching manner with T=2 d was the lowest whereas that in the PABR run in a T=∞(ABR) switching manner was the highest.The same trend was obtained with the total dead space in RTD studies with biomass no matter what the OLR was.Biological dead space was the major contributor to dead space but affected decreasingly at higher OLR whichever switching manner the PABR run in.The flow patterns within the PABRs were intermediate between plug-flow and perfectly mixed under all the conditions tested.     

Multi-biological defects caused by lead exposure exhibit transferable properties from exposed parents to their progeny in Caenorhabditis elegans

Whether the multi-biological toxicity from lead exposure could be transferred to progeny has not been clarified.In the present study,we explored the Caenorhabditis elegans to analyze the multiple toxicities from lead exposure and their possibly transferable properties.The lead exposure could cause series of severe multi-biological defects with a concentration-dependent manner by affecting the endpoints of life span,development,reproduction and locomotion behaviors in nematodes.Moreover,most of these toxicities could be transferred to progeny from lead exposed animals and some of the defects in progeny appeared even more severe than in their parents,such as the body sizes and mean life spans.We summarized the defects caused by lead exposure into three groups according to their transferable properties or rescue patterns.That is,the defects caused by lead exposure could be largely,or partially,or became even more severe in progeny animals.Therefore,our results suggest that lead exposure can cause severely multi-biological defects,and most of these multiple toxicities can be considered as transferable for exposed animals in C.elegans.     

Application of multiwalled carbon nanotubes treated by potassium permanganate for determination of trace cadmium prior to flame atomic absorption spectrometry

In this study we investigated the enrichment ability of oxidized multiwalled carbon nanotubes (MWCNTs) and established a new method for the determination of trace cadmium in environment with flame atomic absorption spectrometry.The MWCNTs were oxidized by potassium permanganate under appropriate conditions before use as preconcentration packing.Parameters influencing the recoveries of target analytes were optimized.Under optimal conditions,the target analyte exhibited a good linearity (R~2=0.9992) over the concentration range 0.5-50 ng/ml.The detection limit and precision of the proposed method were 0.15 ng/ml and 2.06%, respectively.The proposed method was applied to the determination of cadmium in real-world environmental samples and the recoveries were in the range of 91.3%-108.0%.All these experimental results indicated that this new procedure could be applied to the determination of trace cadmium in environmental waters.     

Comparison of membrane fouling during short-term filtration of aerobic granular sludge and activated sludge

Aerobic granular sludge was cultivated adopting internal-circulate sequencing batch airlift reactor.The contradistinctive experiment about short-term membrane fouling between aerobic granular sludge system and activated sludge system were investigated.The membrane foulants was also characterized by Fourier transform infrared(FTIR)spectroscopy technique.The results showed that the aerobic granular sludge had excellent denitrification ability;the removal efficiency of TN could reach 90%.The aerobic granular sludge could alleviate membrane fouling effectively.The steady membrane flux of aerobic granular sludge was twice as much as that of activated sludge system.In addition,it was found that the aerobic granular sludge could result in severe membrane pore-blocking, however,the activated sludge could cause severe cake fouling.The major components of the foulants were identified as comprising of proteins and polysaccharide materials.     

Single and joint stress of acetochlor and Pb on three agricultural crops in northeast China

In order to evaluate ecological risk of agrochemicals in agricultural environment, single and joint toxic effects of an important herbicide and a typical heavy metal on root elongation of crops were investigated. Seeds of the three crops including wheat （Triticum aestivum）, Chinese cabbage （Brassica pekimensis） and soybean （Glycine max） as the main crops in northeast China were exposed to acetochior as a herbicide and lead （Pb） as a heavy metal using the pot-culture method, and meadow brown soil as one of the main soils distributed in northeast China was applied in the investigation. The results indicated that the interactive effects of the two pollutants on root elongation of the three crops were very complicated although they had markedly significant （P〈0.01） linear interrelationships based on the regression analyses. When the concentration of added Pb^2＋ reached 200 mg/kg, acetochlor and Pb had an antagonistic effect on the inhibition of root elongation of the three crops. However, acetochlor and Pb had significantly （P〈0.05） synergic effects on the inhibition of root elongation when concentration of added Pb^2＋ was up to 1000 mg/kg. At the low concentration of added Pb, joint toxicity of acetochlor and Pb was more dependent on the concentration of Pb. Among the three crops, wheat was the most sensitive to the toxicity of Pb and Chinese cabbage was the most sensitive to the toxicity of acetochlor.     

Reaction mode between Si and Fe and evaluation of optimal species in poly-silicic-ferric coagulant

A kind of Fe-polysilicate polymer, poly-silicic-ferric （PSF） coagulant was prepared by co-polymerization （hydroxylation of mixture of Fe^3＋ and fresh polysilicic acid （PS））, in which PSF0.5, PSF1 or PSF3 denotes Si/Fe molar ratio of 0.5, 1 or 3, respectively. The effects of Si/Fe ratio and reaction time （co-polymerization time or aging time） on the reaction mode between Si and Fe were studies, and the optimal species of PSF was evaluated by pH change during the preparation of PSF and coagulation tests. The results showed that the characteristics of PSF are largely affected by both reaction time and Si/Fe ratio. PSF is found to be a essential complex of Si, Fe, and many other ions. The reaction mode between Si and Fe differs with various Si/Fe ratios. The pH of PSF0.5, PSF1 or PSF3 tended to be stable when reaction time is 10, 25 or 55 rain, respectively, which is almost consistent with the time reaching the relative stable morphology that is just the optimal species of higher coagulation efficiency. The optimal reaction time reaching optimal species can be evaluated by measuring the pH change during the polymerization process.