不同目标导向性规划环境影响评价方法浅析

规划环境影响评价是环境影响评价在规划层次的应用,是对规划或计划及其替代方案的环境影响进行规范、系统、综合的评价过程.就政策导向性和项目导向性规划,从规划环评的方法与程序方面进行了比较、分析,并结合嘉兴滨海新区和巢湖皖维化工基地两个规划环评实例进行了案例研究.     

Environmental life cycle assessment of different types of the municipal wastewater pipeline network

With the onset of social life, humans have considered waste disposal as essential, and they have been able to repel it through brick and clay channels. Checking sewage pipes for energy consumption and a longer lifetime than other sewage system components is important. Climate change and exploitation of industrial resources have made environmental impacts, which are important factors in decision making. The purpose of this study was to introduce the most suitable type of sewage pipe considering environmental protection. Therefore, we applied the environmental life cycle assessment (LCA) method, using Sima Pro 8.2.3 software for the one-kilometer length of concrete pipes (300 mm in diameter), Polyvinyl chloride (PVC), and polyethylene (PE) (315 mm in diameter). Also, the BEES method and sensitivity analysis were used to validate the results. The comparison between three types of municipal wastewater pipes indicated that PE pipes are a more environmentally friendly option than PVC, and concrete pipes in pipe recycling, reducing extraction from untapped resources, and inefficient extraction of resources. Electricity, diesel fuel, and sulfate resistance cement consumption for concrete production are the most pollution elements in the LCA of concrete pipes. Usage of PVC granular, sanitary landfill of PVC pipes, and using hydraulic drill in LCA of PVC pipes are the most elements of generating pollution. The usage of PE granules, PE pipes landfilling, hydraulic excavator, and electricity consumption in the LCA of the PE pipes are the greatest polluting parameters.     

土壤盐分变化对N2O排放影响：基于Meta分析

N₂O是导致臭氧层空洞和全球变暖的主要大气污染物,农业生产活动是其主要来源,而土壤盐分则是影响N₂O排放的关键因素.基于21篇同行评议文献中528对实验组及对照组形成的数据集,运用R语言Metafor软件包进行Meta分析,进而评估土壤盐分对土壤N₂O排放的影响.结果表明,土壤盐分累积对N₂O排放量有显著正效应,中度和高度盐渍土N₂O排放量比非盐渍土高75.57%和28.85%.室内培养实验测定结果表明,林地和农田的土壤盐渍化导致N₂O排放量增加124.79%和131.64%,而野外定位监测试验结果表明,草地、裸地和农田中,土壤盐分对N₂O排放的影响均不显著.盐分对N₂O排放的影响趋势则因土壤(NH₄⁺∶NO₃^-)、p H、土壤砂粒含量和粉粒含量的差异而发生改变,影响程度依次是：(NH₄⁺     

测控系统及组态软件在危险环境中的应用

为了及时有效地监测与控制危险环境中的易燃易爆危险品,设计并组建了实验室条件下模拟监控应用系统,通过组态软件完成实时监测与控制.对模拟试验中数据处理方法和参数设计也进行了相关研究.     

机房安全监控系统软件浅析

计算机机房的安全监控软件可分为本地监控软件和远程监控软件两大类,分别就目前这两类软件的特点及其发展趋势做了比较和分析,为用户选择安全监控软件提供了参考和建议。     

Databanks of data sources for environmental chemicals

There exist a vast variety of data sources, either manual sources or computerized databases in the field of environmental chemicals. To facilitate the access and to retrieve the information wanted efficiently, we built up two “databanks of data sources”, one called “Databank of Manual Sources (DMAS)” and the other named “Databank of Databases (DADB)”. The set‐up of these databanks is explained and the load status statistics are shown. DMAS has 164 and DADB 106 hits.     

Fluent软件在地表水源热泵系统温排水数值模拟中的运用

运用Fluent软件对重庆市嘉陵江化龙桥段瑞安新天地江水水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取Fluent中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温升面积和温度梯度。结果表明:在温排水流量为2.0×103 m3/h、温差为4℃的条件下,计算该水域沿水流方向温升超过1℃的最大影响距离为150.4 m,温升超过1℃的水域面积约为1 525 m2,为模拟江水面积的8.59%。选取1℃温升值作为温升带的边界控制值,并在热泵系统最大负荷工况下,根据W=Q×ΔT计算研究水域热环境容量为19.402 m3.℃/s,剩余热环境容量为17.736 m3.℃/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。     

热电行业利用软件管理实现节能降耗

热电行业是我国经济体系中的能耗大户、污染大户,如何在热电行业中做到节能减排、清洁生产,关系到我国的可持续发展。利用软件技术在热电行业中实施清洁生产的管理,实践中证明能实现节能降耗,为同行业开展清洁生产工作提供了新思路。     

气固两相流下球阀磨损特性研究

旋塞球阀是钻柱内防喷系统中的关键设备,在气固两相流下球阀易受磨损而失效,并造成严重的井喷事故。为此,将计算流体动力学理论与冲蚀磨损理论相结合,运用FLUENT软件对球阀壁面在气固两相流下的磨损分布情况进行研究,并进一步分析了球阀结构参数对于球阀壁面磨损的影响规律。结果表明:当气固两相流流经球阀时,固体颗粒会与气流分离,并在壁面上产生三处磨损集中区;随着球阀开度的减小,球阀壁面磨损量会急剧增大,且阀球内通道壁面上的磨损集中区由块状逐步转化为带状,而球阀出口处的磨损集中区则会逐渐向下移动;球阀流道直径的减小也会使得壁面磨损量增加,但磨损集中区的分布基本不变。研究结果可为进一步优化球阀流道结构以减轻其壁面磨损提供理论依据。     

Force-Velocity Characteristics of Individual Human Skeletal Muscles: TBCIat and TBCIong. Outline of the Method

The aim of the work is to outline a procedure of finding force-velocity (F–V) characteristics (F = f(V)) of individual skeletal muscles of the human locomotor system. The presentation is based on an example concerning extensors of the elbow joint: the lateral and long heads of triceps brachii (TBCIat and TBCIong). The experimental part of the procedure involves a natural movement of using the upper extremity to push an external object of variable, adjustable load, engaging both the elbow and shoulder joint.

Five men aged 23 took part in the experiment. Their task was to push the handle of a physical pendulum whose moment of inertia could be adjusted within the range of 58 kg m²-450 kg m², so as to give it maximum angular velocity. During each trial the movement of the trunk, of the upper extremity and of the pendulum was video recorded and the force applied with the hand to the handle of the pendulum was measured.

In order to find the F–V characteristics a simulation model SHOULDER was used, which is capable of solving the synergy problem for muscles of the arm and the shoulder girdle.

It was found that despite considerable dispersion of experimental points the respective regression lines revealed a clear tendency of decreasing muscle force for increased shortening velocity of the monoarticular head (TBCIat) and of increasing muscle force for increased lengthening velocity of the biarticular head (TBCIong) of the triceps brachii muscle.