对医用加速器产生感生放射性的分析与探讨

通过对某医用加速器处于不同能量的电子束或X射线所产生的感生放射性在关机后的不同时刻,进行γ辐射剂量率和中子剂量当量率的测量,分析其随时间的变化趋势及对医务人员所造成的影响,并提出了有针对性的建议.     

基于PCA-ELM模型的露采爆破振动对民房破坏的预测分析

针对露天采矿爆破振动对民房破坏的预测问题,采用主成分分析(PCA)和极限学习机(ELM)方法,选取爆破振幅、主频率、主频率持续时间、灰缝强度、砖墙面积率、房屋高度、屋盖形式、圈梁立柱、施工质量、场地条件10个主要影响因素。引入相关性分析在主成分分析过程中,对相关性高的指标进行降维,把得到的3个综合因子和爆破振幅、主频率、主频率持续时间、砖墙面积率作为输入变量,构建露天煤矿PCA-ELM预测模型。选取露天矿实际爆破过程中测量的100组数据作为模型训练样本,用另外20组数据作为测试样本进行预测。结果表明:对民房破坏影响因素中灰缝强度、房屋高度、屋盖形式、圈梁立柱、施工质量、场地条件之间具有较高的关联度。该模型处理高维数据时较传统的ELM算法具有预测精度高、稳定性好等特点,可准确预测爆破振动对民房的破坏程度,误判率为1/20。     

一种非平稳随机振动试验控制系统设计

目的 实现非平稳随机振动试验控制,在传统随机振动试验控制理论基础上,提出一种针对非平稳连续振动方式下的随机试验控制方法.方法 将均方根时变的非平稳随机振动过程近似等效为一个均方根和PSD谱的乘积模型,通过实时计算归一化的驱动谱,利用均方根实时跟随控制策略,更新驱动信号,实现连续非平稳随机振动控制.利用软件编程实现控制算...     

Integrated Estimation of the Effect of Physical Factors on Human Functional State During Mental Work

The purpose of this study was to develop a model for an integrated estimation of the functional state of the human organism (FSHO) and an integral estimation of physical factors (PF) for hygienic rating. Tests were performed twice with 3 men in 0.7-clo clothing during 4-hr mental work with 9 combinations of 4 PF: wideband noise (55–83 dB(A)), whole-body vibration (6 Hz, a_z = 0.2–1.8 ms^?2), air temperature (18–30 °C), and illumination (1, 3, 5 lx). Thermoregulatory, cardiovascular, and psychophysiological reactions and temporary threshold of hearing (TTS₂) shifts were studied. For the integral estimation of PF influence on FSHO the model F(y₁, y₂, ... y_m) = f(x₁, x₂, ... x_n) was used, relating both FSHO and PF sets. The most important physiological parameters in creating FSHO are defined and the contribution of individual parameters of FSHO and PF is found.     

Defending the Wrist Deviation Test for Carpal Tunnel Syndrome Screening: A Comparison of Vibration Thresholds and Distal Motor Latency

This research used distal motor latency (DML) and vibration thresholds (VT) to evaluate 84 hand activity and wrist deviation combinations to determine the best association with carpal tunnel syndrome (CTS). Female volunteers, 2 healthy and 2 CTS diagnosed, were age matched and operated a keyboard for 4 hrs a day. Room temperature was 28°C(±2). Beginning DML and VT were taken with a relaxed neutral posture hand. The wrist was deviated in a randomly selected combination, and determinations were taken at 5-min intervals. The trial ended at 20 min or when discomfort was felt. The CTS conditions were discriminated by pain four times, DML once, and VT 14 times. Vibrometry was the most consistent CTS discriminator. The best VT results for wrist positions were obtained with wrist extension and extended extension, whereas the unclenched, clenched, and loaded power grip activities proved to be the most consistent hand activities.     

Load Acceleration and Footstep Strategies in Asymmetrical Lifting and Lowering

Accelerated execution effects for lifting and lowering a 12-kg box using two footstep strategies associated with experienced workers were studied. Eight healthy male participants performed a normal and an accelerated execution of a lifting task and a lowering task, using a minimal feet displacement strategy (oblique-step) and a strategy with a step (crossed-step). It was hypothesized that the accelerated executions, as compared to the normal executions, would have a different effect on L5/S1 resultant moment, body posture, and other kinematic variables. A tridimensional dynamic rigid body model was used to compute L5/S1 resultant moments. Results showed that the accelerated condition did not reduce body asymmetry of posture, but it reduced the length of the path of the global center of gravity and the duration of the supporting phase of the box, and it did not significantly affect L5/S1 maximal resultant moments for lifting but increased them for lowering. These results indicate that the net work production for accelerated strategies might be smaller, which may represent an economy of energy. Furthermore, the results showed that the use of an accelerated strategy for lowering should be avoided.     

我国高架交通系统环境振动研究概况

对目前国内该领域的研究手段、研究方法及研究成果进行了分析,指出了该领域的发展所需解决的问题,并给出了需要进一步深入探讨的几个研究课题。     

KTV、慢摇吧等娱乐场所噪声治理方法研究

近年来,随着KTV,慢摇吧等娱乐场所的增加,娱乐场所带来的噪声扰民问题也日益突出。由于业主、施工单位等缺乏隔声降噪的专业知识,使得这一问题没有很好解决。本文通过对这类噪声的特性分析,根据其具有低频为主、穿透力强、不易衰减等特点,结合工程实例,从提高顶棚、侧墙的隔声量,结构上多采用弹性连接及增加阻尼等角度提出几点治理方法。以隔声、隔振为主,控制这类噪声通过空气传声与固体传声等途径向周围居民区传播。     

我国噪声振动控制行业2010年发展综述

综述了2010年我国噪声振动控制行业的发展环境以及新技术的发展和应用情况,分析了行业的市场特点及主要骨干企业的发展情况,指出了行业发展中存在的主要问题,提出了解决对策和建议,并对行业的发展进行了展望。     

基于Hilbert谱信息熵的煤矸放落振动特征分析

针对煤矿安全生产中的综放工作面煤矸界面探测问题,提出利用煤矸下落冲击钢板的振动特征来探测煤矸界面的方法。煤矸振动信号表现出非平稳特征,采用经验模态分解方法将复杂矿井环境下的煤矸振动信号分解成固有模态分量。选择包含煤矸振动特征的前7个本征模函数(IMF)分量,通过Hilbert变换得到Hilbert谱。分析不同放煤状态下钢板振动信号的Hilbert谱发现,顶煤下落时的Hilbert谱分布较均匀,而煤矸混放时的Hilbert谱呈现不均匀分布。根据信息熵理论,提出了基于Hilbert谱信息熵的煤矸振动特征提取方法。试验结果表明,顶煤下落时的Hilbert谱信息熵要大于煤矸混放时的Hilbert谱信息熵,因此,煤矸振动的Hilbert谱信息熵特征能够准确地反映放煤状态。