垃圾填埋场渗滤液的产生，控制处理

垃圾填埋场作为固体废弃物的一种最终处置方法在三废治理中起着重要的作用。但是垃圾填埋场产生的渗滤液会成为二次污染，本文就渗滤液的产生，控制以及处理进行了探讨。     

城市固体废物生物处理方法及其可行性

生物反应堆是通过强化微生物转化和降解有机废物的能力进行处理固体废物的一种方法。本文分别对好氧生物处理、厌氧生物处理和兼性生物处理的机理、影响因素以及各污染物质的迁移转化规律进行综合分析。研究表明生物反应堆具有明显的社会、环境、经济效益，是实现可持续发展的一条重要途径，为以后的研究和应用提供可靠的理论依据。     

厌氧-准好氧型填埋的渗滤液实验研究

通过室内模拟试验，在渗滤液回灌的厌氧填埋柱基本进入稳定状态后，改用准好氧运行方式。同时监测了渗滤液中有机物浓度以压温度、pH值的变化。改变模拟垃圾柱的运行方式两个月以后。氨氯浓度由2000mg／L迅速下降至101．48mg／L，试验结果显示，准好氧运行方式可以解决生物反应器填埋场进入稳定阶段后存在的氨氮浓度高的问题，加速填埋场的稳定。     

Full-scale blending treatment of fresh MSWI leachate with municipal wastewater in a wastewater treatment plant

Fresh leachate, generated in municipal solid waste incineration (MSWI) plants, contains various pollutants with extremely high strength organics, which usually requires expensive and complex treatment processes. This study investigated the feasibility of blending treatment of MSWI leachate with municipal wastewater. Fresh MSWI leachate was pretreated by coagulation–flocculation with FeCl₃ 2 g/L and CaO 25 g/L, plate-and-frame filter press, followed by ammonia stripping at pH above 12. After that, blending treatment was carried out in a full-scale municipal wastewater treatment plant (WWTP) for approximately 3 months. Different operational modes consisting of different pretreated leachate and methanol addition levels were tested, and their performances were evaluated. Results showed that throughout the experimental period, monitored parameters in the WWTP effluent, including COD (<60 mg/L), BOD₅ (<20 mg/L), ammonium (<8 mg/L), phosphorus (<1.5 mg/L) and heavy metals, generally complied with the Chinese sewage discharged standard. Under the experimental conditions, a certain amount of methanol was needed to fulfill TN removal. An estimation of the operation cost revealed that the expenditure of blending treatment was much lower than the total costs of respective treatment of MSWI leachate and municipal wastewater. The outcomes indicated that blending treatment could not only improve the treatability of the MSWI leachate, but also reduce the treatment cost of the two different wastewaters.     

Influence of the geomembrane on time-lapse ERT measurements for leachate injection monitoring

Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. To quantify the water content and to evaluate the leachate injection system, in situ methods are required to obtain spatially distributed information, usually electrical resistivity tomography (ERT). However, this method can present false variations in the observations due to several parameters. This study investigates the impact of the geomembrane on ERT measurements. Indeed, the geomembrane tends to be ignored in the inversion process in most previously conducted studies. The presence of the geomembrane can change the boundary conditions of the inversion models, which have classically infinite boundary conditions. Using a numerical modelling approach, the authors demonstrate that a minimum distance is required between the electrode line and the geomembrane to satisfy the good conditions of use of the classical inversion tools. This distance is a function of the electrode line length (i.e. of the unit electrode spacing) used, the array type and the orientation of the electrode line. Moreover, this study shows that if this criterion on the minimum distance is not satisfied, it is possible to significantly improve the inversion process by introducing the complex geometry and the geomembrane location into the inversion tools. These results are finally validated on a field data set gathered on a small municipal solid waste landfill cell where this minimum distance criterion cannot be satisfied.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

垃圾填埋场中真细菌群落16S rRNA基因的分析

回灌式垃圾填埋场渗滤液中真细菌群落的多样性同样通过不依赖于微生物培养的分析而获得。利用特异性的引物对,选择性地扩增渗滤液DNA中的真细菌16S rRNA基因片断(16S rDNA),并用于构建16S rDNA克隆文库。文库内真细菌16S rDNA的遗传多样性通过限制片断长度多态性分析(RFLP,限制性内切酶Hin PII和Msp I)而获得。初步的结果表明,随机选出的200个真细菌克隆子被分为147个不同的RFLP型(组),当中丰度最高的两个型均仅含有9个克隆子,两者共占所有被分析克隆子的不到10%;克隆子数≥2的型共有21个(包括以上2个丰度最高的型),它们共代表74个克隆子,占所有被分析克隆子的37%;而剩下的126个型均只含有1个克隆子,它们共占整个基因文库的63%。由此可见,李坑垃圾渗滤液中的真细菌具有非常复杂的群落结构。     

回流对陈垃圾生物反应器处理老年渗滤液污染物影响

为了研究回流对陈垃圾反应器处理老年渗滤液污染物的影响,构建了回流的陈垃圾生物反应器,试验了不同温度、负荷和回流比条件下反应器对污染物的去除效果。结果表明,在较低水力负荷12.8~25.5 L/(d.m2)的情况下,陈垃圾反应器对NH3-N、BOD5和COD等污染物的去除率分别达到90%、95%和70%以上。在不同温度下提高水力负荷,回流会抑制氨氮和COD的去除,但可显著提高TN的去除率,表明回流可作为提高老年渗滤液TN去除率的途径之一。利用氮同位素示踪技术发现反应器中有Anammox脱氮途径存在。但是可利用碳源的缺乏仍是提高老年渗滤液脱氮效率的限制因子。     

某简易垃圾填埋场渗滤液在场底天然土层迁移模拟与长期预测

为了解我国早期建设的简易填埋堆场底部天然土层中污染物迁移状况,作者以安徽某填埋场为例,在前期现场勘查、取样和室内测试工作基础上建立了三维有限元分析模型,对宏量有机污染物COD在土层中的迁移状况进行了模拟分析.通过拟合求参获得COD在该场底土层中扩散系数、机械弥散系数和阻滞因子等运移参数的合理取值,在此基础上开展了污染物...     

UASB反应器降解活性染料废水的特性

中温（35±1）℃条件下，采用上流式厌氧污泥床（upflowanaerobicsludgebed，简称UASB）反应器处理了含蒽醌类-活性艳蓝（c．I．ReactiveBlue5，简称K—GR）或偶氮类-活性艳红（C．I．ReactiveRed20，简称KD-8B；C．I．ReactiveRed2，简称X-3B）模拟染料废水，重点研究了回流比对染料脱色率和COD去除率的影响，在最佳回流比的条件下，探讨HRT（hydraulicretentiontime）对脱色的影响和不同结构染料的脱色效果，并初步分析了脱色机理。结果表明，适宜的回流比有利于提高系统的脱色率；控制回流比和HRT分别为2和24h，当模拟废水中染料的浓度为100mg／L时，COD去除率和脱色率分别为90％～96％和85％～92％；蒽醌和偶氮类染料的脱色是通过偶氮键和葸醌共轭结构的断裂来实现的。