O3氧化结合化学吸收同时脱硫脱硝的动力学及热力学研究

构建了O3氧化多种污染物的反应机制,并对O3氧化SOx、NOx过程进行动力学模拟,然后利用热力学原理计算出Ca(OH)2和CaCO3湿法烟气同时脱硫脱硝吸收反应达到平衡时SOx和NOx的分压力.结果表明,Ca(OH)2作吸收剂湿法烟气同时脱硫脱硝比CaCO3作吸收剂效果好,而且两者几乎100％地去除烟气中的SOx和NO...     

电厂燃煤过程中汞控制技术研究

燃煤电厂汞控制技术分燃烧前、燃烧中和燃烧后脱汞，燃烧后脱汞技术为主要汞控制排放工艺，其中吸附剂吸附方法的研究较为广泛。基于国内外近几年燃煤电厂烟气脱汞技术的研究，综述了汞控制技术的最新进展。     

夏、冬季降雨中溶解性有机质(DOM)光谱特征及来源辨析

利用紫外-可见光谱与三维荧光光谱,结合拉格朗日混合单粒子轨道模型及火点图,研究了重庆2013年夏、冬两季雨水DOM光谱特征,并对其来源进行解析.结果表明,雨水DOM与水体、土壤DOM具有类似性质光谱特征,证明降雨DOM也是陆地及水环境中DOM地化特征的重要贡献者.雨水DOM中DOC含量为0.88~12.80 mg·L-1,CDOM含量在3.17~21.11m-1之间,夏、冬两季降雨DOM差异明显(P0.05).与夏季相比,冬季降雨DOM分子量较小,芳香性程度较低,腐殖化程度也更低,输入主要以本地和短距离输送为主;而夏季DOM来源较分散.尽管吸收和荧光光谱可用于解析雨水DOM组成和来源,但在光谱特征的解析和来源识别上与其他来源DOM有所区别,传统"内、外源区分"并不适用于雨水DOM.     

分子生物学技术在水处理中的应用研究进展

利用现代分子生物学技术对微生物进行分析和研究,以解决传统微生物分析成本高、速度慢、准确度较低和灵敏度较差等缺点。介绍分子生物学技术在水处理中的应用现状,并对未来发展方向提出建议。目前分子生物学技术在供水工程中主要用于水中细菌、病毒、原生动物、蠕虫等病原微生物的快速检测以及管网微生物种群的分析,在污水处理中主要用于脱氮除磷过程菌群数量和空间分布的剖析、污泥膨胀成因分析以及监测微生物种群多样性来优化处理工艺。分子生物学技术的深入研究将进一步促进水行业的发展。     

MDEA水溶液膜法天然气脱硫的试验研究

以新配和含有一定H_2S的MDEA溶液为吸收液,以聚偏氟乙烯(PVDF)膜组件为接触器,通过对操作参数的调节和改变膜孔大小等方法对脱硫率和总传质系数进行研究。结果表明:气液压力差以及膜孔孔径的增加均有利于脱硫率和总传质系数的提升,即均有利于脱硫。降低进气流量和低气液比均对H_2S传质有积极作用。     

金属铜原子氧效应研究

目的获取金属铜空间原子氧环境适应性数据,提升材料空间环境适应性设计水平。方法将金属铜样品置于射频源原子氧辐照面积内开展原子氧辐照试验,束流密度为2.5×1016/(cm2·s),最长辐照时间为300 min。研究随辐照时间增加样品表面成分、形貌以及性能的变化。结果原子氧辐照后,金属铜表面变得粗糙,300 min辐照样品出现了氧化层脱落现象;随辐照时间增加,样品质量呈增加趋势,300 min辐照样品质量增加0.035 mg;试验后样品太阳吸收比升高最大值达0.07,光谱反射系数下降;原子氧作用导致金属铜表面疏水性能提高,摩擦磨损性能下降。结论得到了金属铜原子氧环境效应数据,可为航天器空间环境效应防护设计提供技术支撑。     

自然型氨基酸及其钾盐的 CO2吸收和再生特性

在CO2吸收过程中,选择具有不挥发和不发生氧化降解特性的氨基酸盐吸收剂有助于降低吸收剂损失和减轻环境污染风险,故本研究以CO2吸收速率和再生速率为指标,对L-精氨酸和精氨酸钾（PA）吸收剂的CO2吸收性能和常压下热再生性能进行了实验分析,并研究了吸收剂质量分数、反应温度及吸收-再生循环次数对CO2吸收特性的影响,同时还与乙醇胺（MEA）、二乙醇胺（DEA）和三乙醇胺（TEA）进行了对比分析.结果表明,在实验的质量分数范围内,PA具有最高的CO2吸收速率和吸收能力,分别为24.5×10-3mol.（L.min）-1和1.99 mol.mol-1,比相同质量分数的MEA高2.1%和290.2%.温度影响结果表明,40℃时PA和MEA的CO2吸收速率均高于其他实验温度.相同再生条件下,PA的贫液CO2负荷要略高于MEA,但PA的再生程度可达72.8%,比MEA高19%.同时,3次＂吸收-再生＂循环之后,10%PA的CO2吸收能力仍可保持在1.03mol.mol-1,比10%MEA高255.2%.实验结果也表明,L-精氨酸具有较强的CO2吸收能力,其CO2吸收速率与同质量分数的DEA可比.     

Sulfur speciation and bioaccumulation in camphor tree leaves as atmospheric sulfur indicator analyzed by synchrotron radiation XRF and XANES

Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorption near edge structure spectroscopy was established to analyze the sulfur concentration and speciation in mature camphor tree leaves (CTLs),which were sampled from 5 local fields in Shanghai,China.Annual SO2 concentration,SO42-concentration in atmospheric particulate,SO42-and sulfur concentration in soil were also analyzed to explore the relationship between ambient sulfur sources and the sulfur nutrient cycling in CTLs.Total sulfur concentration in mature camphor tree leaves was 766-1704 mg/kg.The mainly detected sulfur states and their corresponding compounds were +6 (sulfate,include inorganic sulfate and organic sulfate),+5.2 (sulfonate),+2.2 (suloxides),+0.6 (thiols and thiothers),+0.2 (organic sulfides).Total sulfur concentration was strongly correlated with sulfate proportion with a linear correlation coefficient up to 0.977,which suggested that sulfur accumulated in CTLs as sulfate form.Reduced sulfur compounds (organic sulfides,thiols,thioethers,sulfoxide and sulfonate) assimilation was sufficed to meet the nutrient requirement for growth at a balanced level around 526 mg/kg.The sulfate accumulation mainly caused by atmospheric sulfur pollution such as SO2 and airborne sulfate particulate instead of soil contamination.From urban to suburb place,sulfate in mature CTLs decreased as the atmospheric sulfur pollution reduced,but a dramatic increase presented near the seashore,where the marine sulfate emission and maritime activity pollution were significant.The sulfur concentration and speciation in mature CTLs effectively represented the long-term biological accumulation of atmospheric sulfur pollution in local environment.     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

预富集技术在原子吸收光谱环境分析中的应用

原子吸收光谱法是分析环境水样中金属离子含量的有效方法之一。在测定时往往需要对样品进行前处理,然后再进行测定。文章介绍了近些年较新的一些分离富集技术在原子吸收光谱分析环境中金属离子时的应用,分析了离子交换树脂在样品中金属离子富集分离过程中的研究近况,评述了固相萃取、析相微萃取、单滴液滴微萃取、分散液液微萃取、离子液体萃取、浊点萃取等多种萃取方式在样品预富集中的应用进展,综述了活性炭、纳米粒子、淀粉、分子筛等吸附剂在富集环境水样中金属元素的应用现状,同时还对在线富集技术与流动注射分析技术联用在金属元素分析中的应用进展进行了评述。