Characterization of fulvic acids during olive mill waste composting (Elemental,Thermal and fluorescence analyses)

Elemental analysis, fluorescence spectroscopy and differential scanning calorimetry (DSC) were applied to the study of fulvic acids isolated from different stages during olive mill waste composting. The fulvic extracted acids are characterized by a high nitrogen content and O/C ratio values that may result from the high degree of humification and the synthesis of more condensed humic complexes. This was confirmed by fluorescence spectroscopy in the synchronous-scan mode by the decrease of shoulder intensities at intermediate wavelengths indicating the increase of polycondensation and conjugation of unsaturated structures and the greater uniformity of fluorophores. Fluorescence spectra in the emission, excitation and synchronous modes became simpler with compost maturation. This was confirmed by DSC results which proved the high degree of polycondensation of aromatic nuclei of fulvic acid molecules during olive mill waste composting.     

城市生活垃圾好氧堆肥中氨气变化及其影响

堆肥过程中氮素损失比较严重,而氨气挥发是氮损失的主要途径。利用城市生活垃圾进行好氧堆肥,研究其堆肥过程中氨气变化规律及其对堆肥性质的影响。结果表明:在堆肥期间,氨气含量先增加后减小,最后基本稳定在5 mg/kg左右;而全氮含量先降低后增加;硝态氮含量先降低后增加;铵态氮是先快速增加,后缓慢减小至稳定;pH值先下降后升高,最终稳定在中性范围内;w(C)/w(N)先增加后下降;有机质含量显著下降。     

计算机废弃物的处理与利用

介绍计算机废弃物的来源、组成、污染,重点阐述了计算机废弃物的拆卸技术和塑料、线路板、贵金属的回收利用方法。对计算机废弃物处理有重要的参考借鉴价值。     

Enhancement of anaerobic biodegradability of flower stem wastes with vegetable wastes by co-hydrolysis

The vegetable wastes and flower stems were co-digested to evaluate the anaerobic hydrolysis performance of difficultly biodegradable organic wastes by introducing readily biodegradable organic wastes. The experiments were carried out in batches. When the vegetable wastes were mixed with the flower stems at the dry weight ratio of 1 to 13, the overall hydrolysis rate increased by 8%, 12%, and 2% according to the carbon, nitrogen, and total solid （TS） conversion rate, respectively. While the dry weight ratio was designed as 1 to 3, there was a respective rise of 5%, 15%, and 4% in the conversion rate of carbon, nitrogen, and TS. The enhancement of anaerobic hydrolysis from the mixed vegetable wastes and flower stems can be attributed to the formation of volatile fatty acids （VFA） and nutrient supplement like nitrogen content. The maximum VFA concentration can achieve 1.7 g/L owing to the rapid acidification of vegetable wastes, loosing the structure of lignocellulose materials. The statistic bivariate analysis revealed that the hydrolysis performance was significantly related to the physical and biochemical compositions of the feeding substrate. Especially, the soluble carbon concentration in the liquid was significantly positively correlated to the concentration of nitrogen and hemicellulose, and negatively correlated to the concentration of carbon and lignocellulose in the feeding substrate, suggesting that the regulation and control of feedstock can have an important influence on the anaerobic hydrolysis of organic wastes.     

废旧锂离子电池资源化技术研究

通过介绍废旧锂离子电池的组成成分及近年来废旧锂离子电池资源化处理技术的研究进展,提出目前主要回收方法有溶解分离法和直接回收正极材料的新型方法等,并对现有研究中存在的二次污染、安全性问题进行了初步探讨。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

高温蒸汽灭菌处理技术处置医疗废物工艺设计

高温蒸汽灭菌处理技术是近几年开发的新型医疗废物处置技术,并在全国部分地区得到了应用和推广。以西北某市医疗废物处置工程中高温蒸汽灭菌处理技术的应用为例,通过对其工程原理、系统组成、工艺流程等的分析论证共同探讨其工程原理和性能特点,为今后在工程实际中的运用提供参考。     

Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.