A CALIBRATION PROCEDURE USING TOPMODEL TO DETERMINE SUITABILITY FOR EVALUATING POTENTIAL CLIMATE CHANGE EFFECTS ON WATER YIELD1

ABSTRACT: An evaluation was conducted on three forested upland watersheds in the northeastern U.S. to test the suitability of TOPMODEL for predicting water yield over a wide range of climatic scenarios. The analysis provides insight of the usefulness of TOPMODEL as a predictive tool for future assessments of potential long-term changes in water yield as a result of changes in global climate. The evaluation was conducted by developing a calibration procedure to simulate a range of climatic extremes using historical temperature, precipitation, and streamfiow records for years having wet, average, and dry precipitation amounts from the Leading Ridge (Pennsylvania), Fernow (West Virginia), and Hubbard Brook (New Hampshire) Experimental Watersheds. This strategy was chosen to determine whether the model could be successfully calibrated over a broad range of soil moisture conditions with the assumption that this would be representative of the sensitivity necessary to predict changes in streamfiow under a variety of climate change scenarios. The model calibration was limited to a daily time step, yet performed reasonably well for each watershed. Model efficiency, a least squares measure of how well a model performs, averaged between 0.64 and 0.78. A simple test of the model whereby daily temperatures were increased by 1.7°C, resulted in annual water yield decreases of 4 to 15 percent on the three watersheds. Although these results makes the assumption that the model components adequately describe the system, this version of TOPMODEL is capable to predict water yield impacts given subtle changes in the temperature regime. This suggests that adequate representations of the effects of climate change on water yield for regional assessment purposes can be expected using the TOPMODEL concept.     

声发射检测灵敏度校准声源实验分析

在声发射技术的应用中,传感器的工作频率和灵敏度对AE检测的结果具有决定性的作用,传感器的校准是AE定量研究的基础,也是声发射检测技术研究中的重要课题。根据二级校准的相关要求设计了三个不同声源的实验:落球、断铅和压断毛细玻璃管法。通过重复性实验,测量了不同大小的钢球从不同高度下落;不同粗细、硬度以及不同长度的铅芯的断裂;不同粗细的毛细玻璃管被压断产生的脉冲声源,分别比较以上三个实验在不同状态条件下产生的脉冲声源信号,分析其实时特征和频谱特征(峰值,上升时间),通过计算确定其不确定度和稳定度,总结优化操作方法,同时分析了实验误差。在此基础上得出最适合做声发射传感器灵敏度校准的脉冲声源,为声发射传感器校准中的参考声源提供性能评判的依据。     

Standard purity and response factors of perfluorinated compounds

It has been reported that the relative response factors of isotopically labeled standards and unlabeled standards of the same perfluorinated compounds could be different. Individual (100 ng mL^?1) solutions of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) were analyzed using high-performance liquid chromatography tandem mass-spectrometry under negative-ion electrospray to detect any impurities present down to 0.5%–0.1% relative to the major component. Purity of the standards ranged from approximately 86% to ≥ 97%. Standard solutions of unlabeled and isotopically labeled materials were analyzed to compare the response factors of isotopically labeled analytes versus their nonlabeled counterparts in three different matrices at equivalent concentrations: organic solvent (methanol), serum extract, and water present individually and concurrently. Not all labeled analytes have the same response factor as their nonlabeled complement, and in at least one case the matrix in which the standard is present may cause significant suppression of response. Standard solutions of electrochemical fluorination produced PFOA and PFOS were quantified under multiple reaction monitoring mode, using calibration curves prepared from standards consisting primarily of linear standards only. The use of linear only standards may cause under-prediction of concentrations, and that the working range of these standards may be limited.     

Local calibration of coliforms parameters of water quality problem at Igapó I Lake, Londrina, Paraná, Brazil

This article presents results concerning the local calibration of the transport parameters (longitudinal and transversal diffusions and decay coefficient) for a two-dimensional problem of water quality at Igapó I Lake, located in Londrina, Paraná, Brazil, using fecal coliforms as an indicator of water quality. The simulation of fecal coliforms concentrations all over the water body is conducted by means of a structured discretization of the geometry of Igapó I Lake, together with the finite difference and finite element methods. By using the velocity field, modeled by the Navier-Stokes and Poisson equations, the flow of fecal coliforms is described by means of a transport model, which considers advective and diffusive processes, as well as a process of fecal coliforms decay. In the checkpoint, the longitudinal and transversal diffusion coefficients and the coliforms decay coefficient that best fitted the value of the fecal coliforms concentration were D_x = D_y = 0.001 m²/h and k = 0.5 d⁻¹ = 0.02083 h⁻¹. A qualitative and quantitative analysis of the numerical simulations conducted in function of the diffusion coefficients and of the coliforms decay parameter provided a better understanding of the local water quality at Igapó I Lake.     

Carbon sequestration in soils of SW-Germany as affected by agricultural management—Calibration of the EPIC model for regional simulations

Global emissions trading allows for agricultural measures to be accounted for the carbon sequestration in soils. The Environmental Policy Integrated Climate (EPIC) model was tested for central European site conditions by means of agricultural extensification scenarios. Results of soil and management analyses of different management systems (cultivation with mouldboard plough, reduced tillage, and grassland/fallow establishment) on 13 representative sites in the German State Baden-Württemberg were used to calibrate the EPIC model. Calibration results were compared to those of the Intergovernmental Panel on Climate Change (IPCC) prognosis tool. The first calibration step included adjustments in (a) N depositions, (b) N₂-fixation by bacteria during fallow, and (c) nutrient content of organic fertilisers according to regional values. The mixing efficiency of implements used for reduced tillage and four crop parameters were adapted to site conditions as a second step of the iterative calibration process, which should optimise the agreement between measured and simulated humus changes. Thus, general rules were obtained for the calibration of EPIC for different criteria and regions. EPIC simulated an average increase of +0.341 Mg humus-C ha⁻¹ a⁻¹ for on average 11.3 years of reduced tillage compared to land cultivated with mouldboard plough during the same time scale. Field measurements revealed an average increase of +0.343 Mg C ha⁻¹ a⁻¹ and the IPCC prognosis tool +0.345 Mg C ha⁻¹ a⁻¹. EPIC simulated an average increase of +1.253 Mg C ha⁻¹ a⁻¹ for on average 10.6 years of grassland/fallow establishment compared to an average increase of +1.342 Mg humus-C ha⁻¹ a⁻¹ measured by field measurements and +1.254 Mg C ha⁻¹ a⁻¹ according to the IPCC prognosis tool. The comparison of simulated and measured humus C stocks was r² ≥ 0.825 for all treatments. However, on some sites deviations between simulated and measured results were considerable. The result for the simulation of yields was similar. In 49% of the cases the simulated yields differed from the surveyed ones by more than 20%. Some explanations could be found by qualitative cause analyses. Yet, for quantitative analyses the available information from farmers was not sufficient. Altogether EPIC is able to represent the expected changes by reduced tillage or grassland/fallow establishment acceptably under central European site conditions of south-western Germany.     

Recruitment and attrition of associated plants under a shading crop canopy: Model selection and calibration

Associated plant and animal diversity provides ecosystem services within crop production systems. The importance of the maintenance or restoration of diversity is therefore increasingly acknowledged. Here we study the population dynamics of associated annual plants (‘weeds’) during the growth of a crop in a season and introduce a minimal model to characterize the recruitment and attrition of the associated plants under the influence of shading by the crop. A mechanistically based, logistic, light interception model was parameterized with light interception measurements in two single crops (barley and rye) and in mixtures of these cereals with peas. Population dynamics data were collected for the annuals Papaver rhoeas, Centaurea cyanus, Chrysanthemum segetum, and Misopates orontium. A minimal population dynamics model was identified for each annual plant species, using system identification techniques as model selection and calibration.     

P矩阵校正技术在光度法测定COD中的应用

对可能的干扰金属离子进行了筛选,通过对多个检验集样品的分析,确定了最优分析波长组,并进一步对多个实际样品进行了测量,结果表明,本方法测定结果与国标推荐方法相比没有明显差异,同时可无需预先化学分离就很好地消除共存金属离子的干扰,具有操作简便、测定快速的优点。     

UBET在圆环压缩中的应用及绘制理论校准曲线精度的讨论

将UBET用于求解压缩圆环问题 ,可简便快速地取得上限解 ;进而采用该解绘制塑性加工中测量摩擦系数的理论校准曲线。对中性层的位置进行了精确求解 ;分析了绘制理论校准曲线时 ,总压缩量、压缩步长量等参数对其结果的影响     

Some statistical and conceptual issues in the detection of low-level environmental pollutants

With increasing concern over chemicals that are potential health hazards at low levels, determination of limits of detection have undergone considerable scrutiny. Most traditional detection limit estimators suffer from extensive statistical and/or conceptual limitations. In this paper, traditional detection limit estimators are described and critically evaluated. Using the terminology of Currie (1968), methods are categorized into decision limits versus detection limits. The methods are further categorized into single concentration design versus calibration design methodologies. While the single concentration design methods are useful for fixing ideas and clarifying definitions, they are shown to be extremely limited in practice since dependence of variability on concentration can neither be estimated or incorporated. Calibration-based detection limit estimators are described, compared and contrasted. Generalizations to non-constant variance, multiple future detection decisions and simultaneous control of Type I and II errors are provided. The various calibration-based methods are illustrated using real data and experimental design issues for detection limit studies discussed.