城市碳排放的评估方法——影响要素和过程研究

城市碳排放对全球碳循环和气候变化产生了深远的影响。论文在国内外城市碳排放研究基础上,从城市化的碳排放效应、城市碳排放估算和影响要素、碳排放观测、碳循环和碳代谢过程等方面系统归纳总结了碳排放评估方法、要素和过程。评述了Kaya恒等式、LMDI方法、CGE模型、混合分析法、清单编制法、UE模型、FFDAS模型、STIRPAT模型、格网模型、综合分析法(Four-part Methodology)、建筑碳排放模型、物质代谢法、EC碳通量观测等代表性碳排放估算和观测方法。研究焦点正在从宏观模式转向微观机理,从自然、人文单一过程转向人文-自然耦合过程,热点区域从发达国家城市转向发展中国家城市,从单一数据源转向遥感、实验观测等多源数据。基于上述特点,当前研究应从城市公平发展和低碳城市出发,建立城市公共利益能源研究框架,根据城市职能类型和发展水平,综合涡度通量观测、计量模型、生态模型、遥感和GIS技术,构建高精度城市碳排放账户,建立城市代谢存量和流量标准分类系统,发展和完善碳排放估算模型,提高城市碳排放计算结果精度和城市间的可比性。     

影响中国碳排放绩效的区域特征研究——基于熵值法的聚类分析

论文选择影响碳排放绩效的主要指标,基于熵值法确定各指标权重,采用系统聚类分析的方法,以中国省域为研究对象,将全国分为7类区域。分析结果显示:区域分工特征是造成目前中国省级碳排放绩效区域差异的主要影响因素,其次是高碳产业工艺特征和能源结构特征,而经济结构对解释省级碳排放绩效区域差异的贡献有限。北方地区高碳产品生产份额高且工艺水平相对低,能源消费中极高的煤炭比例加重了负面影响,造成其二氧化碳排放绩效水平低,特别是华北地区;近年来东南沿海地区高碳产业也逐步增加,但由于其工艺先进,在一定程度上抵消了高碳产品份额高的负面影响;中西部地区目前高碳产品份额虽然低于东部地区,但工艺水平也低,造成了其低水平的二氧化碳排放绩效。由于各省历史发展、自然资源禀赋、区域分工角色等因素不同,且遵从经济宏观发展客观规律和经济区位理论,除了少数发达地区之外,中国其他区域短时间内很难改变其经济和能源结构,低碳政策制定的重点应放在提高高碳产业工艺水平方面。     

施肥对稻田甲烷与氧化亚氮排放的影响

大气温室气体浓度的升高引起太阳辐射加强,导致全球变暖已成为不争的事实。农田是温室气体排放的重要来源之一,采用静态箱-气相色谱法探讨不同氮肥类型与施氮水平对华南稻田甲烷（CH4）与氧化亚氮（N2O）排放的影响。试验共设置5个处理,每处理3次重复,分别（以N计）为U6（90 kg·hm-2）,U10（150 kg·hm-2）,U12（180 kg·hm-2）,SR10（150 kg·hm-2,缓释肥）,CR10（150 kg·hm-2,控释肥）。各处理磷钾肥用量一致,分别为45 kg·hm-2（以P2O5计）和127.5 kg·hm-2（以K2O计）。研究结果表明：稻田CH4与N2O排放量随氮肥用量的增加呈增加趋势。晚稻CH4排放呈单峰型,其峰值出现在水稻移栽后16~23 d,N2O排放并未出现明显的排放峰。CH4累积排放主要发生在返青-分蘖初期和分蘖盛期-幼穗分化期两个时段,而N2O的累积排放主要集中在灌浆-成熟期（U6处理除外）。不同氮肥类型处理CH4季节排放总量与平均排放量表现为：处理SR10〉处理U10〉处理CR10,其中,控释肥处理甲烷排放总量较常规尿素处理减少了11.3%;而N2O季节排放总量与平均排放量表现为：处理CR10〉处理U10〉处理SR10。综上,初步认为氮肥的施用能够促进CH4与N2O的释放,缓释肥处理能有效减少稻田N2O的排放,而控释尿素处理能明显降低稻田CH4气体的排放,且稻田CH4与N2O的排放存在一定的互为消长关系,因此如何平衡稻田甲烷与氧化亚氮释放,使稻田增温潜势最小化是下一步研究的重点和方向。     

Emission factors of gaseous carbonaceous species from residential combustion of coal and crop residue briquettes

Experiments were performed to measure the emission factors (EFs) of gaseous carbonaceous species, such as CO₂, CO, CH₄, and non-methane volatile organic compounds (NMVOCs), from the combustion of five types of coal of varying organic maturity and two types of biomass briquettes under residential burning conditions. Samples were collected in stainless steel canisters and 2,4-dinitrophenylhydrazine (DNPH) cartridges and were analyzed by GC-FID/MS and HPLC, respectively. The EFs from crop residue briquette burning were generally higher than those from coals, with the exception of CO₂. The dominant NMVOC species identified in coal smoke were carbonyls (41.7%), followed by C2 unsaturated hydrocarbons (29.1%) and aromatics (12.1%), while C2 unsaturated hydrocarbons were the dominant species (68.9%) emitted from the combustion of crop residue briquettes, followed by aromatics (14.4%). A comparison of burning normal crop residues in stoves and the open field indicated that briquettes emitted a larger proportion of ethene and acetylene. Both combustion efficiency and coal organic maturity had a significant impact on NMVOC EFs from burning coal: NMVOC emissions increased with increasing coal organic maturity but decreased as the combustion efficiency improved. Emissions from the combustion of crop residue briquettes from stoves occurred mainly during the smoldering process, with low combustion efficiency. Therefore, an improved stove design to allow higher combustion efficiency would be beneficial for reducing emissions of carbonaceous air pollutants.     

The abatement of major pollutants in air and water by environmental catalysis

This review reports the research progress in the abatement of major pollutants in air and water by environmental catalysis. For air pollution control, the selective catalytic reduction of NO _x (SCR) by ammonia and hydrocarbons on metal oxide and zeolite catalysts are reviewed and discussed, as is the removal of Hg from flue gas by catalysis. The oxidation of Volatile organic compounds (VOCs) by photo- and thermal-catalysis for indoor air quality improvement is reviewed. For wastewater treatment, the catalytic elimination of inorganic and organic pollutants in wastewater is presented. In addition, the mechanism for the procedure of abatement of air and water pollutants by catalysis is discussed in this review. Finally, a research orientation on environment catalysis for the treatment of air pollutants and wastewater is proposed.     

PCDD/Fs emission, risk characterization, and reduction in China’s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shandong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%–57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.     

Capacity development for participatory disaster risk assessment

In this paper a large-scale community-based disaster risk-assessment project, undertaken in the Dr Kenneth Kaunda District Municipality in the North-West Province of South Africa, is evaluated. In contrast to other disaster risk management consultancy projects in South Africa, this project included a significant skills transfer component to the at-risk communities and local government officials. In this evaluation, the authors draw on their own experiences in implementing this and similar projects, a review of the project management documents is undertaken, and a focus group interview with facilitators involved in the project is used as a primary source. The discussion is further contextualised in terms of community-based disaster risk assessment theory and the existing literature on disaster risk assessment in South Africa. Logistical and data quality issues as well as staff turnover were found to be concerns during the project. From the findings, it is argued that the common practice of outsourcing disaster risk-management projects is not conducive to effective disaster risk management. Local government entities should take responsibility for disaster risk assessment as a continual activity. This is in contrast to the view currently manifesting in South Africa as a set of bureaucratic actions undertaken by consultants to achieve ‘legislative compliance’ for municipalities.     

TCP的污泥减量效果及其对出水水质的长期影响

向倒置A2/O中试系统中投加2,4,5-三氯苯酚(TCP),研究TCP对污泥的减量效果及进入处理系统后对系统出水水质长期影响。研究结果表明:与参照组相比,加药组投加TCP 2 mg/L时,污泥减量达62.5%,出水TN比参照组平均高0.8 mg/L,137 d后出水TP超过0.5 mg/L。TCP对污泥的减量效果好,需要加除磷药剂进行辅助除磷。     

日本城市碳排放清单计算方法——以横滨市为例

日本是关注全球气候变化并作出行动最早的国家之一,根据其法律大中城市以上的行政区必须编制温室气体减排规划,包括排放清单、趋势预测、减排目标、措施及效果分析、方案实施与监督等。日本环境省为了帮助地方政府编制该规划,提供了城市层面的温室气体排放清单的编制方法指导。本文以横滨市为例,比较完整地介绍日本城市CO2排放清单编制基本方法,为我国城市碳排放清单编制提供参考。     

区域层面温室气体清单不确定性量化研究

基于《IPCC国家温室气体清单优良做法指南和不确定性管理》中不确定性分析的理论和方法,以编制包括省级、地市级在内的区域层面温室气体清单为背景,就不确定性分析的难点、来源和组成进行分析,并通过实例研究对适用于区域层面温室气体清单的不确定性量化方法进行说明,进而提升不确定性分析的可操作性和透明性,为完善温室气体清单提供有价值的参考。