炼油污水的深度处理

对炼油污水深度处理常用技术——过滤、膜分离、化学氧化技术进行了详细的论述，并结合中试试验，对动态砂滤系统、PAN膜处理系统和高级氧化系统处理炼油厂二级排放水的适用性进行了论证。     

昆明市医疗废物的焚烧处理

医疗废物含有大量传染性物质,导致污染的可能是各种病菌和寄生虫卵等,是高度危险废物,必须进行无害化处置.针对昆明市医疗废物的现状,根据国内外先进的管理和处理模式,结合昆明市实际情况,采用焚烧实验炉焚烧昆明市医疗废物,医疗废物无须进行预处理,能直接进行焚烧.实验证明,高温焚烧可彻底清除医疗废物中的病菌及恶臭气体,保证医疗废物的无害化处理.     

固定化藻类去除氮、磷的研究进展

综述了近20年来固定化藻类去除氮、磷的主要研究,归纳分析了相关的研究数据和结果,分别从固定化技术、藻类的生理特征、去除机理、影响因素、生物反应器等方面做了具体介绍.     

茶粕有机肥的开发与利用

论述了生物有机肥在发展农业生产中的重要地位,以及生产中存在着的大量使用集约化畜禽养殖场的畜禽粪对土壤、水体等环境质量和农产品质量安全产生严重影响的问题,提出以茶粕作为原料生产有机肥具有生产过程相对安全、克服有机肥二次污染的优点.此外,茶叶次生代谢物茶多酚、茶色素、茶皂素和茶皂甙等具有抗氧化、清除自由基、络合金属离子、调节植物生长和生物防虫、灭虫等独特生理功效,将极大地提高茶粕有机肥的生物有效性,显示出其广阔的应用前景.     

再燃法烟气脱硝技术

综述了再燃法烟气脱硝技术及其主要影响因素。通过对几种脱硝技术的分析比较，认为再燃脱硝是一种很有前景的脱硝技术，其投资和运行费用界于低NO。燃烧器和选择性催化还原技术之间，有喷氨条件下的先进再燃脱硝效率接近于选择性催化还原技术。总结了国内外对先进再燃脱硝技术各种参数影响条件的研究结果，并论述了该技术的应用要点。     

电化学技术在环保领域的应用

详细介绍了电化学技术的各种类型，并综述了电化学技术在环保领域的研究、应用及发展状况。     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

用超滤膜分离技术从洗毛废水中回收羊毛脂

洗毛废水中含有重要的工业原料羊毛脂,不做回收处理排放到环境中就是＂三废＂,既污染了环境又浪费了资源.介绍了用超滤膜从洗毛废水中回收羊毛脂的工艺技术,经处理的洗毛废水CODcr去除率达95.5%,BOD5去除率达93.1%,有效的回收了羊毛脂,经济效益良好,符合国家环保产业政策.     

化学法处理电镀废水的自动化控制应用

采用化学法自动控制处理含铬和含镍电镀废水,选择合适的化学药剂和pH、ORP控制参数,连续式处理电镀废水.运行结果表明:该工艺简单、处理效果良好、运行稳定、可操作性好、运行成本适中、能很好的适应水质的波动,处理后的水质完全符合排放标准.     

ORIGIN AND TRANSPORT OF DISSOLVED CHEMICALS IN A KARST WATERSHED,SOUTHWESTERN ILLINOIS1

ABSTRACT: An extensive base of water quality information emphasizing the effects of land use and hydrology was obtained in the karstified Fountain Creek watershed of southwestern Illinois to help resolve local water quality issues. Agrichemicals dominate the loads of most water quality constituents in the streams and shallow karstic ground water. Only calcium (Ca), magnesium (Mg), Aluminum (A1), and sulfate (SO₄) ions are predominantly derived from bedrock or soils, while agrichemicals contribute most of the sodium (Na), potassium (K), chlorine (Cl), nitrate (NO₃), fluorine (F), phosphorus (P), and atrazine. Concentrations of individual ions correlate with discharge variations in karst springs and surface streams; highly soluble ions supplied by diffuse ground water are diluted by high flows, while less soluble ions increase with flow as they are mobilized from fields to karst conduits under storm conditions. Treated wastewater containing detergent residues dominates the boron load of streams and provides important subordinate loads of several other constituents, including atrazine derived from the Mississippi River via the public water supply. Average surface water concentrations at the watershed outlet closely approximate a 92:8 mixture of karst ground water and treated wastewater, demonstrating the dominance of ground water contributions to streams. Therefore the karst aquifer and watershed streams form a single water quality system that is also affected by wastewater effluent.